| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2003 by Wilson Snyder. | |
| // | |
| // This is a copy of t_param.v with the parentheses around the module parameters | |
| // removed. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| parameter PAR = 3; | |
| m1 #PAR m1(); | |
| m3 #PAR m3(); | |
| mnooverride #10 mno(); | |
| input clk; | |
| integer cyc=1; | |
| reg [4:0] bitsel; | |
| always @ (posedge clk) begin | |
| cyc <= cyc + 1; | |
| if (cyc==0) begin | |
| bitsel = 0; | |
| if (PAR[bitsel]!==1'b1) $stop; | |
| bitsel = 1; | |
| if (PAR[bitsel]!==1'b1) $stop; | |
| bitsel = 2; | |
| if (PAR[bitsel]!==1'b0) $stop; | |
| end | |
| if (cyc==1) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module m1; | |
| localparam PAR1MINUS1 = PAR1DUP-2-1; | |
| localparam PAR1DUP = PAR1+2; // Check we propagate parameters properly | |
| parameter PAR1 = 0; | |
| m2 #PAR1MINUS1 m2 (); | |
| endmodule | |
| module m2; | |
| parameter PAR2 = 10; | |
| initial begin | |
| $display("%x",PAR2); | |
| if (PAR2 !== 2) $stop; | |
| end | |
| endmodule | |
| module m3; | |
| localparam LOC = 13; | |
| parameter PAR = 10; | |
| initial begin | |
| $display("%x %x",LOC,PAR); | |
| if (LOC !== 13) $stop; | |
| if (PAR !== 3) $stop; | |
| end | |
| endmodule | |
| module mnooverride; | |
| localparam LOC = 13; | |
| parameter PAR = 10; | |
| initial begin | |
| $display("%x %x",LOC,PAR); | |
| if (LOC !== 13) $stop; | |
| if (PAR !== 10) $stop; | |
| end | |
| endmodule |