| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2018 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=0; | |
| reg [63:0] crc; | |
| reg [63:0] sum; | |
| // Take CRC data and apply to testblock inputs | |
| wire [31:0] in = crc[31:0]; | |
| Test test (/*AUTOINST*/ | |
| // Inputs | |
| .clk (clk), | |
| .in (in[31:0])); | |
| Test2 test2 (/*AUTOINST*/ | |
| // Inputs | |
| .clk (clk), | |
| .in (in[31:0])); | |
| // Test loop | |
| always @ (posedge clk) begin | |
| cyc <= cyc + 1; | |
| crc <= {crc[62:0], crc[63]^crc[2]^crc[0]}; | |
| if (cyc==0) begin | |
| // Setup | |
| crc <= 64'h5aef0c8d_d70a4497; | |
| end | |
| else if (cyc<10) begin | |
| end | |
| else if (cyc<90) begin | |
| end | |
| else if (cyc==99) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module Test (/*AUTOARG*/ | |
| // Inputs | |
| clk, in | |
| ); | |
| input clk; | |
| input [31:0] in; | |
| reg [31:0] dly0; | |
| reg [31:0] dly1; | |
| reg [31:0] dly2; | |
| reg [31:0] dly3; | |
| // If called in an assertion, sequence, or property, the appropriate clocking event. | |
| // Otherwise, if called in a disable condition or a clock expression in an assertion, sequence, or prop, explicit. | |
| // Otherwise, if called in an action block of an assertion, the leading clock of the assertion is used. | |
| // Otherwise, if called in a procedure, the inferred clock | |
| // Otherwise, default clocking | |
| always @(posedge clk) begin | |
| dly0 <= in; | |
| dly1 <= dly0; | |
| dly2 <= dly1; | |
| dly3 <= dly2; | |
| // $past(expression, ticks, expression, clocking) | |
| // In clock expression | |
| if (dly0 != $past(in)) $stop; | |
| if (dly0 != $past(in,1)) $stop; | |
| if (dly1 != $past(in,2)) $stop; | |
| end | |
| assert property (@(posedge clk) dly0 == $past(in)); | |
| endmodule | |
| module Test2 (/*AUTOARG*/ | |
| // Inputs | |
| clk, in | |
| ); | |
| input clk; | |
| input [31:0] in; | |
| reg [31:0] dly0; | |
| reg [31:0] dly1; | |
| default clocking @(posedge clk); endclocking | |
| assert property (@(posedge clk) dly1 == $past(in, 2)); | |
| endmodule |