| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2006 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| // verilator lint_off MULTIDRIVEN | |
| wire [31:0] outb0c0; | |
| wire [31:0] outb0c1; | |
| wire [31:0] outb1c0; | |
| wire [31:0] outb1c1; | |
| reg [7:0] lclmem [7:0]; | |
| ma ma0 (.outb0c0(outb0c0), .outb0c1(outb0c1), | |
| .outb1c0(outb1c0), .outb1c1(outb1c1) | |
| ); | |
| global_mod #(32'hf00d) global_cell (); | |
| global_mod #(32'hf22d) global_cell2 (); | |
| input clk; | |
| integer cyc=1; | |
| always @ (posedge clk) begin | |
| cyc <= cyc + 1; | |
| `ifdef TEST_VERBOSE | |
| $write("[%0t] cyc%0d: %0x %0x %0x %0x\n", $time, cyc, outb0c0, outb0c1, outb1c0, outb1c1); | |
| `endif | |
| if (cyc==2) begin | |
| if (global_cell.globali != 32'hf00d) $stop; | |
| if (global_cell2.globali != 32'hf22d) $stop; | |
| if (outb0c0 != 32'h00) $stop; | |
| if (outb0c1 != 32'h01) $stop; | |
| if (outb1c0 != 32'h10) $stop; | |
| if (outb1c1 != 32'h11) $stop; | |
| end | |
| if (cyc==3) begin | |
| // Can we scope down and read and write vars? | |
| ma0.mb0.mc0.out <= ma0.mb0.mc0.out + 32'h100; | |
| ma0.mb0.mc1.out <= ma0.mb0.mc1.out + 32'h100; | |
| ma0.mb1.mc0.out <= ma0.mb1.mc0.out + 32'h100; | |
| ma0.mb1.mc1.out <= ma0.mb1.mc1.out + 32'h100; | |
| end | |
| if (cyc==4) begin | |
| // Can we do dotted's inside array sels? | |
| ma0.rmtmem[ma0.mb0.mc0.out[2:0]] = 8'h12; | |
| lclmem[ma0.mb0.mc0.out[2:0]] = 8'h24; | |
| if (outb0c0 != 32'h100) $stop; | |
| if (outb0c1 != 32'h101) $stop; | |
| if (outb1c0 != 32'h110) $stop; | |
| if (outb1c1 != 32'h111) $stop; | |
| end | |
| if (cyc==5) begin | |
| if (ma0.rmtmem[ma0.mb0.mc0.out[2:0]] != 8'h12) $stop; | |
| if (lclmem[ma0.mb0.mc0.out[2:0]] != 8'h24) $stop; | |
| if (outb0c0 != 32'h1100) $stop; | |
| if (outb0c1 != 32'h2101) $stop; | |
| if (outb1c0 != 32'h2110) $stop; | |
| if (outb1c1 != 32'h3111) $stop; | |
| end | |
| if (cyc==6) begin | |
| if (outb0c0 != 32'h31100) $stop; | |
| if (outb0c1 != 32'h02101) $stop; | |
| if (outb1c0 != 32'h42110) $stop; | |
| if (outb1c1 != 32'h03111) $stop; | |
| end | |
| if (cyc==9) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| `ifdef USE_INLINE_MID | |
| `define INLINE_MODULE /*verilator inline_module*/ | |
| `define INLINE_MID_MODULE /*verilator no_inline_module*/ | |
| `else | |
| `ifdef USE_INLINE | |
| `define INLINE_MODULE /*verilator inline_module*/ | |
| `define INLINE_MID_MODULE /*verilator inline_module*/ | |
| `else | |
| `define INLINE_MODULE /*verilator public_module*/ | |
| `define INLINE_MID_MODULE /*verilator public_module*/ | |
| `endif | |
| `endif | |
| module global_mod; | |
| `INLINE_MODULE | |
| parameter INITVAL = 0; | |
| integer globali; | |
| initial globali = INITVAL; | |
| endmodule | |
| module ma ( | |
| output wire [31:0] outb0c0, | |
| output wire [31:0] outb0c1, | |
| output wire [31:0] outb1c0, | |
| output wire [31:0] outb1c1 | |
| ); | |
| `INLINE_MODULE | |
| reg [7:0] rmtmem [7:0]; | |
| mb #(0) mb0 (.outc0(outb0c0), .outc1(outb0c1)); | |
| mb #(1) mb1 (.outc0(outb1c0), .outc1(outb1c1)); | |
| endmodule | |
| module mb ( | |
| output wire [31:0] outc0, | |
| output wire [31:0] outc1 | |
| ); | |
| `INLINE_MID_MODULE | |
| parameter P2 = 0; | |
| mc #(P2,0) mc0 (.out(outc0)); | |
| mc #(P2,1) mc1 (.out(outc1)); | |
| global_mod #(32'hf33d) global_cell2 (); | |
| wire reach_up_clk = t.clk; | |
| always @(reach_up_clk) begin | |
| if (P2==0) begin // Only for mb0 | |
| if (outc0 !== t.ma0.mb0.mc0.out) $stop; // Top module name and lower instances | |
| if (outc0 !== ma0.mb0.mc0.out) $stop; // Upper module name and lower instances | |
| if (outc0 !== ma .mb0.mc0.out) $stop; // Upper module name and lower instances | |
| if (outc0 !== mb.mc0.out) $stop; // This module name and lower instances | |
| if (outc0 !== mb0.mc0.out) $stop; // Upper instance name and lower instances | |
| if (outc0 !== mc0.out) $stop; // Lower instances | |
| if (outc1 !== t.ma0.mb0.mc1.out) $stop; // Top module name and lower instances | |
| if (outc1 !== ma0.mb0.mc1.out) $stop; // Upper module name and lower instances | |
| if (outc1 !== ma .mb0.mc1.out) $stop; // Upper module name and lower instances | |
| if (outc1 !== mb.mc1.out) $stop; // This module name and lower instances | |
| if (outc1 !== mb0.mc1.out) $stop; // Upper instance name and lower instances | |
| if (outc1 !== mc1.out) $stop; // Lower instances | |
| end | |
| end | |
| endmodule | |
| module mc (output reg [31:0] out); | |
| `INLINE_MODULE | |
| parameter P2 = 0; | |
| parameter P3 = 0; | |
| initial begin | |
| out = {24'h0,P2[3:0],P3[3:0]}; | |
| //$write("%m P2=%0x p3=%0x out=%x\n",P2, P3, out); | |
| end | |
| // Can we look from the top module name down? | |
| wire [31:0] reach_up_cyc = t.cyc; | |
| always @ (posedge t.clk) begin | |
| //$write("[%0t] %m: Got reachup, cyc=%0d\n", $time, reach_up_cyc); | |
| if (reach_up_cyc==2) begin | |
| if (global_cell.globali != 32'hf00d) $stop; | |
| if (global_cell2.globali != 32'hf33d) $stop; | |
| end | |
| if (reach_up_cyc==4) begin | |
| out[15:12] <= {P2[3:0]+P3[3:0]+4'd1}; | |
| end | |
| if (reach_up_cyc==5) begin | |
| // Can we set another instance? | |
| if (P3==1) begin // Without this, there are two possible correct answers... | |
| mc0.out[19:16] <= {mc0.out[19:16]+P2[3:0]+P3[3:0]+4'd2}; | |
| $display("%m Set %x->%x %x %x %x %x",mc0.out, {mc0.out[19:16]+P2[3:0]+P3[3:0]+4'd2}, mc0.out[19:16],P2[3:0],P3[3:0],4'd2); | |
| end | |
| end | |
| end | |
| endmodule |