| `default_nettype none | |
| module top | |
| ( | |
| inout wire [7:0] data_io, | |
| output reg [7:0] rdata_o, | |
| input wire [7:0] wdata_i, | |
| input wire rxf_n_i, | |
| input wire txe_n_i, | |
| output reg rd_n_o, | |
| output reg wr_n_o, | |
| output reg siwua_n_o, | |
| input wire clk_i, | |
| output reg oe_n_o, | |
| input wire suspend_n_i | |
| ); | |
| initial begin | |
| rdata_o = {8{1'b0}}; | |
| rd_n_o = 1; | |
| wr_n_o = 1; | |
| siwua_n_o = 1; /* Never flush TX data. */ | |
| end | |
| assign data_io = (!txe_n_i && !wr_n_o) ? wdata_i : {8{1'bz}}; | |
| always @(posedge clk_i, negedge suspend_n_i) begin | |
| if (!suspend_n_i) begin | |
| wr_n_o <= 1; | |
| rd_n_o <= 1; | |
| oe_n_o <= 1; | |
| rdata_o <= {8{1'b0}}; | |
| end | |
| else begin | |
| // Give TX bus precedence. | |
| if (!txe_n_i) begin | |
| wr_n_o <= 0; | |
| rd_n_o <= 1; | |
| oe_n_o <= 1; | |
| rdata_o <= {8{1'b0}}; | |
| end | |
| // oe_n_o must be driven low at least one period before we can read. | |
| else if (!rxf_n_i && oe_n_o) begin | |
| wr_n_o <= 1; | |
| rd_n_o <= 1; | |
| oe_n_o <= 0; | |
| rdata_o <= {8{1'b0}}; | |
| end | |
| else if (!rxf_n_i && !oe_n_o) begin | |
| wr_n_o <= 1; | |
| rd_n_o <= 0; | |
| oe_n_o <= 0; | |
| rdata_o <= data_io; | |
| end | |
| else begin | |
| wr_n_o <= 1; | |
| rd_n_o <= 1; | |
| oe_n_o <= 1; | |
| rdata_o <= {8{1'b0}}; | |
| end | |
| end // else: !if(!suspend_n_i) | |
| end | |
| endmodule // usb |