| // ========== Copyright Header Begin ========================================== | |
| // | |
| // OpenSPARC T1 Processor File: test_stub_scan.v | |
| // Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved. | |
| // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES. | |
| // | |
| // The above named program is free software; you can redistribute it and/or | |
| // modify it under the terms of the GNU General Public | |
| // License version 2 as published by the Free Software Foundation. | |
| // | |
| // The above named program is distributed in the hope that it will be | |
| // useful, but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| // General Public License for more details. | |
| // | |
| // You should have received a copy of the GNU General Public | |
| // License along with this work; if not, write to the Free Software | |
| // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. | |
| // | |
| // ========== Copyright Header End ============================================ | |
| // ____________________________________________________________________________ | |
| // | |
| // test_stub_bist - Test Stub with Scan Support | |
| // ____________________________________________________________________________ | |
| // | |
| // Description: DBB interface for test signal generation | |
| // ____________________________________________________________________________ | |
| module test_stub_scan (/*AUTOARG*/ | |
| // Outputs | |
| mux_drive_disable, mem_write_disable, sehold, se, testmode_l, | |
| mem_bypass, so_0, so_1, so_2, | |
| // Inputs | |
| ctu_tst_pre_grst_l, arst_l, global_shift_enable, | |
| ctu_tst_scan_disable, ctu_tst_scanmode, ctu_tst_macrotest, | |
| ctu_tst_short_chain, long_chain_so_0, short_chain_so_0, | |
| long_chain_so_1, short_chain_so_1, long_chain_so_2, short_chain_so_2 | |
| ); | |
| input ctu_tst_pre_grst_l; | |
| input arst_l; // no longer used | |
| input global_shift_enable; | |
| input ctu_tst_scan_disable; // redefined as pin_based_scan | |
| input ctu_tst_scanmode; | |
| input ctu_tst_macrotest; | |
| input ctu_tst_short_chain; | |
| input long_chain_so_0; | |
| input short_chain_so_0; | |
| input long_chain_so_1; | |
| input short_chain_so_1; | |
| input long_chain_so_2; | |
| input short_chain_so_2; | |
| output mux_drive_disable; | |
| output mem_write_disable; | |
| output sehold; | |
| output se; | |
| output testmode_l; | |
| output mem_bypass; | |
| output so_0; | |
| output so_1; | |
| output so_2; | |
| wire pin_based_scan; | |
| wire short_chain_en; | |
| wire short_chain_select; | |
| // INTERNAL CLUSTER CONNECTIONS | |
| // | |
| // Scan Chain Hookup | |
| // ================= | |
| // | |
| // Scan chains have two configurations: long and short. | |
| // The short chain is typically the first tenth of the | |
| // long chain. The short chain should contain memory | |
| // collar flops for deep arrays. The CTU determines | |
| // which configuration is selected. Up to three chains | |
| // are supported. | |
| // | |
| // The scanout connections from the long and short | |
| // chains connect to the following inputs: | |
| // | |
| // long_chain_so_0, short_chain_so_0 (mandatory) | |
| // long_chain_so_1, short_chain_so_1 (optional) | |
| // long_chain_so_2, short_chain_so_2 (optional) | |
| // | |
| // The test stub outputs should connect directly to the | |
| // scanout port(s) of the cluster: | |
| // | |
| // so_0 (mandatory), so_1 (optional), so_2 (optional) | |
| // | |
| // | |
| // Static Output Signals | |
| // ===================== | |
| // | |
| // testmode_l | |
| // | |
| // Local testmode control for overriding gated | |
| // clocks, asynchronous resets, etc. Asserted | |
| // for all shift-based test modes. | |
| // | |
| // mem_bypass | |
| // | |
| // Memory bypass control for arrays without output | |
| // flops. Allows testing of shadow logic. Asserted | |
| // for scan test; de-asserted for macrotest. | |
| // | |
| // | |
| // Dynamic Output Signals | |
| // ====================== | |
| // | |
| // sehold | |
| // | |
| // The sehold signal needs to be set for macrotest | |
| // to allow holding flops in the array collars | |
| // to retain their shifted data during capture. | |
| // Inverted version of scan enable during macrotest. | |
| // | |
| // mux_drive_disable (for mux/long chain protection) | |
| // | |
| // Activate one-hot mux protection circuitry during | |
| // scan shift and reset. Formerly known as rst_tri_en. | |
| // Also used by long chain memories with embedded | |
| // control. | |
| // | |
| // mem_write_disable (for short chain protection) | |
| // | |
| // Protects contents of short chain memories during | |
| // shift and POR. | |
| // | |
| // se | |
| assign mux_drive_disable = ~ctu_tst_pre_grst_l | short_chain_select | se; | |
| assign mem_write_disable = ~ctu_tst_pre_grst_l | se; | |
| assign sehold = ctu_tst_macrotest & ~se; | |
| assign se = global_shift_enable; | |
| assign testmode_l = ~ctu_tst_scanmode; | |
| assign mem_bypass = ~ctu_tst_macrotest & ~testmode_l; | |
| assign pin_based_scan = ctu_tst_scan_disable; | |
| assign short_chain_en = ~(pin_based_scan & se); | |
| assign short_chain_select = ctu_tst_short_chain & ~testmode_l & short_chain_en; | |
| assign so_0 = short_chain_select ? short_chain_so_0 : long_chain_so_0; | |
| assign so_1 = short_chain_select ? short_chain_so_1 : long_chain_so_1; | |
| assign so_2 = short_chain_select ? short_chain_so_2 : long_chain_so_2; | |
| endmodule // test_stub_scan |