undo formatting fuckup

techlibs/gowin/synth_gowin.cc

diff --git a/techlibs/gowin/synth_gowin.cc b/techlibs/gowin/synth_gowin.cc
index 89cbc50..a44bbe2 100644
--- a/techlibs/gowin/synth_gowin.cc
+++ b/techlibs/gowin/synth_gowin.cc
@@ -33,42 +33,42 @@
 	{
 		//	 |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
 		log("\n");
-		log("	 synth_gowin [options]\n");
+		log("		 synth_gowin [options]\n");
 		log("\n");
 		log("This command runs synthesis for Gowin FPGAs. This work is experimental.\n");
 		log("\n");
-		log("	 -top <module>\n");
-		log("		 use the specified module as top module (default='top')\n");
+		log("		 -top <module>\n");
+		log("				 use the specified module as top module (default='top')\n");
 		log("\n");
-		log("	 -vout <file>\n");
-		log("		 write the design to the specified Verilog netlist file. writing of an\n");
-		log("		 output file is omitted if this parameter is not specified.\n");
+		log("		 -vout <file>\n");
+		log("				 write the design to the specified Verilog netlist file. writing of an\n");
+		log("				 output file is omitted if this parameter is not specified.\n");
 		log("\n");
-		log("	 -run <from_label>:<to_label>\n");
-		log("		 only run the commands between the labels (see below). an empty\n");
-		log("		 from label is synonymous to 'begin', and empty to label is\n");
-		log("		 synonymous to the end of the command list.\n");
+		log("		 -run <from_label>:<to_label>\n");
+		log("				 only run the commands between the labels (see below). an empty\n");
+		log("				 from label is synonymous to 'begin', and empty to label is\n");
+		log("				 synonymous to the end of the command list.\n");
 		log("\n");
-		log("	 -nodffe\n");
-		log("		 do not use flipflops with CE in output netlist\n");
+		log("		 -nodffe\n");
+		log("				 do not use flipflops with CE in output netlist\n");
 		log("\n");
-		log("	 -nobram\n");
-		log("		 do not use BRAM cells in output netlist\n");
+		log("		 -nobram\n");
+		log("				 do not use BRAM cells in output netlist\n");
 		log("\n");
-		log("	 -nodram\n");
-		log("		 do not use distributed RAM cells in output netlist\n");
+		log("		 -nodram\n");
+		log("				 do not use distributed RAM cells in output netlist\n");
 		log("\n");
-		log("	 -noflatten\n");
-		log("		 do not flatten design before synthesis\n");
+		log("		 -noflatten\n");
+		log("				 do not flatten design before synthesis\n");
 		log("\n");
-		log("	 -retime\n");
-		log("		 run 'abc' with -dff option\n");
+		log("		 -retime\n");
+		log("				 run 'abc' with -dff option\n");
 		log("\n");
-		log("	 -nowidelut\n");
-		log("		 do not use muxes to implement LUTs larger than LUT4s\n");
+		log("		 -nowidelut\n");
+		log("				 do not use muxes to implement LUTs larger than LUT4s\n");
 		log("\n");
-		log("	 -abc9\n");
-		log("		 use new ABC9 flow (EXPERIMENTAL)\n");
+		log("		 -abc9\n");
+		log("				 use new ABC9 flow (EXPERIMENTAL)\n");
 		log("\n");
 		log("\n");
 		log("The following commands are executed by this synthesis command:\n");
@@ -237,7 +237,7 @@
 			run("setundef -undriven -params -zero");
 			run("hilomap -singleton -hicell VCC V -locell GND G");
 			run("iopadmap -bits -inpad IBUF O:I -outpad OBUF I:O", "(unless -noiopads)");
-			run("dffinit  -ff DFF Q INIT");
+			run("dffinit	-ff DFF Q INIT");
 			run("clean");
 
 		}