| /* | |
| * yosys -- Yosys Open SYnthesis Suite | |
| * | |
| * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| * | |
| */ | |
| // [[CITE]] ABC | |
| // Berkeley Logic Synthesis and Verification Group, ABC: A System for Sequential Synthesis and Verification | |
| // http://www.eecs.berkeley.edu/~alanmi/abc/ | |
| // [[CITE]] Berkeley Logic Interchange Format (BLIF) | |
| // University of California. Berkeley. July 28, 1992 | |
| // http://www.ece.cmu.edu/~ee760/760docs/blif.pdf | |
| // [[CITE]] Kahn's Topological sorting algorithm | |
| // Kahn, Arthur B. (1962), "Topological sorting of large networks", Communications of the ACM 5 (11): 558-562, doi:10.1145/368996.369025 | |
| // http://en.wikipedia.org/wiki/Topological_sorting | |
| #define ABC_COMMAND_LIB "strash; ifraig; scorr; dc2; dretime; retime {D}; strash; &get -n; &dch -f; &nf {D}; &put" | |
| #define ABC_COMMAND_CTR "strash; ifraig; scorr; dc2; dretime; retime {D}; strash; &get -n; &dch -f; &nf {D}; &put; buffer; upsize {D}; dnsize {D}; stime -p" | |
| #define ABC_COMMAND_LUT "strash; ifraig; scorr; dc2; dretime; retime {D}; strash; dch -f; if; mfs2" | |
| #define ABC_COMMAND_SOP "strash; ifraig; scorr; dc2; dretime; retime {D}; strash; dch -f; cover {I} {P}" | |
| #define ABC_COMMAND_DFL "strash; ifraig; scorr; dc2; dretime; retime {D}; strash; &get -n; &dch -f; &nf {D}; &put" | |
| #define ABC_FAST_COMMAND_LIB "strash; dretime; retime {D}; map {D}" | |
| #define ABC_FAST_COMMAND_CTR "strash; dretime; retime {D}; map {D}; buffer; upsize {D}; dnsize {D}; stime -p" | |
| #define ABC_FAST_COMMAND_LUT "strash; dretime; retime {D}; if" | |
| #define ABC_FAST_COMMAND_SOP "strash; dretime; retime {D}; cover -I {I} -P {P}" | |
| #define ABC_FAST_COMMAND_DFL "strash; dretime; retime {D}; map" | |
| #include "kernel/register.h" | |
| #include "kernel/sigtools.h" | |
| #include "kernel/celltypes.h" | |
| #include "kernel/cost.h" | |
| #include "kernel/log.h" | |
| #include <stdlib.h> | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <cctype> | |
| #include <cerrno> | |
| #include <sstream> | |
| #include <climits> | |
| #ifndef _WIN32 | |
| # include <unistd.h> | |
| # include <dirent.h> | |
| #endif | |
| #include "frontends/blif/blifparse.h" | |
| #ifdef YOSYS_LINK_ABC | |
| extern "C" int Abc_RealMain(int argc, char *argv[]); | |
| #endif | |
| USING_YOSYS_NAMESPACE | |
| PRIVATE_NAMESPACE_BEGIN | |
| enum class gate_type_t { | |
| G_NONE, | |
| G_FF, | |
| G_BUF, | |
| G_NOT, | |
| G_AND, | |
| G_NAND, | |
| G_OR, | |
| G_NOR, | |
| G_XOR, | |
| G_XNOR, | |
| G_ANDNOT, | |
| G_ORNOT, | |
| G_MUX, | |
| G_NMUX, | |
| G_AOI3, | |
| G_OAI3, | |
| G_AOI4, | |
| G_OAI4 | |
| }; | |
| #define G(_name) gate_type_t::G_ ## _name | |
| struct gate_t | |
| { | |
| int id; | |
| gate_type_t type; | |
| int in1, in2, in3, in4; | |
| bool is_port; | |
| RTLIL::SigBit bit; | |
| RTLIL::State init; | |
| }; | |
| bool map_mux4; | |
| bool map_mux8; | |
| bool map_mux16; | |
| bool markgroups; | |
| int map_autoidx; | |
| SigMap assign_map; | |
| RTLIL::Module *module; | |
| std::vector<gate_t> signal_list; | |
| std::map<RTLIL::SigBit, int> signal_map; | |
| std::map<RTLIL::SigBit, RTLIL::State> signal_init; | |
| pool<std::string> enabled_gates; | |
| bool recover_init, cmos_cost; | |
| bool clk_polarity, en_polarity; | |
| RTLIL::SigSpec clk_sig, en_sig; | |
| dict<int, std::string> pi_map, po_map; | |
| int map_signal(RTLIL::SigBit bit, gate_type_t gate_type = G(NONE), int in1 = -1, int in2 = -1, int in3 = -1, int in4 = -1) | |
| { | |
| assign_map.apply(bit); | |
| if (signal_map.count(bit) == 0) { | |
| gate_t gate; | |
| gate.id = signal_list.size(); | |
| gate.type = G(NONE); | |
| gate.in1 = -1; | |
| gate.in2 = -1; | |
| gate.in3 = -1; | |
| gate.in4 = -1; | |
| gate.is_port = false; | |
| gate.bit = bit; | |
| if (signal_init.count(bit)) | |
| gate.init = signal_init.at(bit); | |
| else | |
| gate.init = State::Sx; | |
| signal_list.push_back(gate); | |
| signal_map[bit] = gate.id; | |
| } | |
| gate_t &gate = signal_list[signal_map[bit]]; | |
| if (gate_type != G(NONE)) | |
| gate.type = gate_type; | |
| if (in1 >= 0) | |
| gate.in1 = in1; | |
| if (in2 >= 0) | |
| gate.in2 = in2; | |
| if (in3 >= 0) | |
| gate.in3 = in3; | |
| if (in4 >= 0) | |
| gate.in4 = in4; | |
| return gate.id; | |
| } | |
| void mark_port(RTLIL::SigSpec sig) | |
| { | |
| for (auto &bit : assign_map(sig)) | |
| if (bit.wire != NULL && signal_map.count(bit) > 0) | |
| signal_list[signal_map[bit]].is_port = true; | |
| } | |
| void extract_cell(RTLIL::Cell *cell, bool keepff) | |
| { | |
| if (cell->type.in(ID($_DFF_N_), ID($_DFF_P_))) | |
| { | |
| if (clk_polarity != (cell->type == ID($_DFF_P_))) | |
| return; | |
| if (clk_sig != assign_map(cell->getPort(ID(C)))) | |
| return; | |
| if (GetSize(en_sig) != 0) | |
| return; | |
| goto matching_dff; | |
| } | |
| if (cell->type.in(ID($_DFFE_NN_), ID($_DFFE_NP_), ID($_DFFE_PN_), ID($_DFFE_PP_))) | |
| { | |
| if (clk_polarity != cell->type.in(ID($_DFFE_PN_), ID($_DFFE_PP_))) | |
| return; | |
| if (en_polarity != cell->type.in(ID($_DFFE_NP_), ID($_DFFE_PP_))) | |
| return; | |
| if (clk_sig != assign_map(cell->getPort(ID(C)))) | |
| return; | |
| if (en_sig != assign_map(cell->getPort(ID(E)))) | |
| return; | |
| goto matching_dff; | |
| } | |
| if (0) { | |
| matching_dff: | |
| RTLIL::SigSpec sig_d = cell->getPort(ID(D)); | |
| RTLIL::SigSpec sig_q = cell->getPort(ID(Q)); | |
| if (keepff) | |
| for (auto &c : sig_q.chunks()) | |
| if (c.wire != NULL) | |
| c.wire->attributes[ID::keep] = 1; | |
| assign_map.apply(sig_d); | |
| assign_map.apply(sig_q); | |
| map_signal(sig_q, G(FF), map_signal(sig_d)); | |
| module->remove(cell); | |
| return; | |
| } | |
| if (cell->type.in(ID($_BUF_), ID($_NOT_))) | |
| { | |
| RTLIL::SigSpec sig_a = cell->getPort(ID::A); | |
| RTLIL::SigSpec sig_y = cell->getPort(ID::Y); | |
| assign_map.apply(sig_a); | |
| assign_map.apply(sig_y); | |
| map_signal(sig_y, cell->type == ID($_BUF_) ? G(BUF) : G(NOT), map_signal(sig_a)); | |
| module->remove(cell); | |
| return; | |
| } | |
| if (cell->type.in(ID($_AND_), ID($_NAND_), ID($_OR_), ID($_NOR_), ID($_XOR_), ID($_XNOR_), ID($_ANDNOT_), ID($_ORNOT_))) | |
| { | |
| RTLIL::SigSpec sig_a = cell->getPort(ID::A); | |
| RTLIL::SigSpec sig_b = cell->getPort(ID::B); | |
| RTLIL::SigSpec sig_y = cell->getPort(ID::Y); | |
| assign_map.apply(sig_a); | |
| assign_map.apply(sig_b); | |
| assign_map.apply(sig_y); | |
| int mapped_a = map_signal(sig_a); | |
| int mapped_b = map_signal(sig_b); | |
| if (cell->type == ID($_AND_)) | |
| map_signal(sig_y, G(AND), mapped_a, mapped_b); | |
| else if (cell->type == ID($_NAND_)) | |
| map_signal(sig_y, G(NAND), mapped_a, mapped_b); | |
| else if (cell->type == ID($_OR_)) | |
| map_signal(sig_y, G(OR), mapped_a, mapped_b); | |
| else if (cell->type == ID($_NOR_)) | |
| map_signal(sig_y, G(NOR), mapped_a, mapped_b); | |
| else if (cell->type == ID($_XOR_)) | |
| map_signal(sig_y, G(XOR), mapped_a, mapped_b); | |
| else if (cell->type == ID($_XNOR_)) | |
| map_signal(sig_y, G(XNOR), mapped_a, mapped_b); | |
| else if (cell->type == ID($_ANDNOT_)) | |
| map_signal(sig_y, G(ANDNOT), mapped_a, mapped_b); | |
| else if (cell->type == ID($_ORNOT_)) | |
| map_signal(sig_y, G(ORNOT), mapped_a, mapped_b); | |
| else | |
| log_abort(); | |
| module->remove(cell); | |
| return; | |
| } | |
| if (cell->type.in(ID($_MUX_), ID($_NMUX_))) | |
| { | |
| RTLIL::SigSpec sig_a = cell->getPort(ID::A); | |
| RTLIL::SigSpec sig_b = cell->getPort(ID::B); | |
| RTLIL::SigSpec sig_s = cell->getPort(ID(S)); | |
| RTLIL::SigSpec sig_y = cell->getPort(ID::Y); | |
| assign_map.apply(sig_a); | |
| assign_map.apply(sig_b); | |
| assign_map.apply(sig_s); | |
| assign_map.apply(sig_y); | |
| int mapped_a = map_signal(sig_a); | |
| int mapped_b = map_signal(sig_b); | |
| int mapped_s = map_signal(sig_s); | |
| map_signal(sig_y, cell->type == ID($_MUX_) ? G(MUX) : G(NMUX), mapped_a, mapped_b, mapped_s); | |
| module->remove(cell); | |
| return; | |
| } | |
| if (cell->type.in(ID($_AOI3_), ID($_OAI3_))) | |
| { | |
| RTLIL::SigSpec sig_a = cell->getPort(ID::A); | |
| RTLIL::SigSpec sig_b = cell->getPort(ID::B); | |
| RTLIL::SigSpec sig_c = cell->getPort(ID(C)); | |
| RTLIL::SigSpec sig_y = cell->getPort(ID::Y); | |
| assign_map.apply(sig_a); | |
| assign_map.apply(sig_b); | |
| assign_map.apply(sig_c); | |
| assign_map.apply(sig_y); | |
| int mapped_a = map_signal(sig_a); | |
| int mapped_b = map_signal(sig_b); | |
| int mapped_c = map_signal(sig_c); | |
| map_signal(sig_y, cell->type == ID($_AOI3_) ? G(AOI3) : G(OAI3), mapped_a, mapped_b, mapped_c); | |
| module->remove(cell); | |
| return; | |
| } | |
| if (cell->type.in(ID($_AOI4_), ID($_OAI4_))) | |
| { | |
| RTLIL::SigSpec sig_a = cell->getPort(ID::A); | |
| RTLIL::SigSpec sig_b = cell->getPort(ID::B); | |
| RTLIL::SigSpec sig_c = cell->getPort(ID(C)); | |
| RTLIL::SigSpec sig_d = cell->getPort(ID(D)); | |
| RTLIL::SigSpec sig_y = cell->getPort(ID::Y); | |
| assign_map.apply(sig_a); | |
| assign_map.apply(sig_b); | |
| assign_map.apply(sig_c); | |
| assign_map.apply(sig_d); | |
| assign_map.apply(sig_y); | |
| int mapped_a = map_signal(sig_a); | |
| int mapped_b = map_signal(sig_b); | |
| int mapped_c = map_signal(sig_c); | |
| int mapped_d = map_signal(sig_d); | |
| map_signal(sig_y, cell->type == ID($_AOI4_) ? G(AOI4) : G(OAI4), mapped_a, mapped_b, mapped_c, mapped_d); | |
| module->remove(cell); | |
| return; | |
| } | |
| } | |
| std::string remap_name(RTLIL::IdString abc_name, RTLIL::Wire **orig_wire = nullptr) | |
| { | |
| std::string abc_sname = abc_name.substr(1); | |
| bool isnew = false; | |
| if (abc_sname.compare(0, 4, "new_") == 0) | |
| { | |
| abc_sname.erase(0, 4); | |
| isnew = true; | |
| } | |
| if (abc_sname.compare(0, 5, "ys__n") == 0) | |
| { | |
| abc_sname.erase(0, 5); | |
| if (std::isdigit(abc_sname.at(0))) | |
| { | |
| int sid = std::atoi(abc_sname.c_str()); | |
| size_t postfix_start = abc_sname.find_first_not_of("0123456789"); | |
| std::string postfix = postfix_start != std::string::npos ? abc_sname.substr(postfix_start) : ""; | |
| if (sid < GetSize(signal_list)) | |
| { | |
| auto sig = signal_list.at(sid); | |
| if (sig.bit.wire != nullptr) | |
| { | |
| std::string s = stringf("$abc$%d$%s", map_autoidx, sig.bit.wire->name.c_str()+1); | |
| if (sig.bit.wire->width != 1) | |
| s += stringf("[%d]", sig.bit.offset); | |
| if (isnew) | |
| s += "_new"; | |
| s += postfix; | |
| if (orig_wire != nullptr) | |
| *orig_wire = sig.bit.wire; | |
| return s; | |
| } | |
| } | |
| } | |
| } | |
| return stringf("$abc$%d$%s", map_autoidx, abc_name.c_str()+1); | |
| } | |
| void dump_loop_graph(FILE *f, int &nr, std::map<int, std::set<int>> &edges, std::set<int> &workpool, std::vector<int> &in_counts) | |
| { | |
| if (f == NULL) | |
| return; | |
| log("Dumping loop state graph to slide %d.\n", ++nr); | |
| fprintf(f, "digraph \"slide%d\" {\n", nr); | |
| fprintf(f, " label=\"slide%d\";\n", nr); | |
| fprintf(f, " rankdir=\"TD\";\n"); | |
| std::set<int> nodes; | |
| for (auto &e : edges) { | |
| nodes.insert(e.first); | |
| for (auto n : e.second) | |
| nodes.insert(n); | |
| } | |
| for (auto n : nodes) | |
| fprintf(f, " ys__n%d [label=\"%s\\nid=%d, count=%d\"%s];\n", n, log_signal(signal_list[n].bit), | |
| n, in_counts[n], workpool.count(n) ? ", shape=box" : ""); | |
| for (auto &e : edges) | |
| for (auto n : e.second) | |
| fprintf(f, " ys__n%d -> ys__n%d;\n", e.first, n); | |
| fprintf(f, "}\n"); | |
| } | |
| void handle_loops() | |
| { | |
| // http://en.wikipedia.org/wiki/Topological_sorting | |
| // (Kahn, Arthur B. (1962), "Topological sorting of large networks") | |
| std::map<int, std::set<int>> edges; | |
| std::vector<int> in_edges_count(signal_list.size()); | |
| std::set<int> workpool; | |
| FILE *dot_f = NULL; | |
| int dot_nr = 0; | |
| // uncomment for troubleshooting the loop detection code | |
| // dot_f = fopen("test.dot", "w"); | |
| for (auto &g : signal_list) { | |
| if (g.type == G(NONE) || g.type == G(FF)) { | |
| workpool.insert(g.id); | |
| } else { | |
| if (g.in1 >= 0) { | |
| edges[g.in1].insert(g.id); | |
| in_edges_count[g.id]++; | |
| } | |
| if (g.in2 >= 0 && g.in2 != g.in1) { | |
| edges[g.in2].insert(g.id); | |
| in_edges_count[g.id]++; | |
| } | |
| if (g.in3 >= 0 && g.in3 != g.in2 && g.in3 != g.in1) { | |
| edges[g.in3].insert(g.id); | |
| in_edges_count[g.id]++; | |
| } | |
| if (g.in4 >= 0 && g.in4 != g.in3 && g.in4 != g.in2 && g.in4 != g.in1) { | |
| edges[g.in4].insert(g.id); | |
| in_edges_count[g.id]++; | |
| } | |
| } | |
| } | |
| dump_loop_graph(dot_f, dot_nr, edges, workpool, in_edges_count); | |
| while (workpool.size() > 0) | |
| { | |
| int id = *workpool.begin(); | |
| workpool.erase(id); | |
| // log("Removing non-loop node %d from graph: %s\n", id, log_signal(signal_list[id].bit)); | |
| for (int id2 : edges[id]) { | |
| log_assert(in_edges_count[id2] > 0); | |
| if (--in_edges_count[id2] == 0) | |
| workpool.insert(id2); | |
| } | |
| edges.erase(id); | |
| dump_loop_graph(dot_f, dot_nr, edges, workpool, in_edges_count); | |
| while (workpool.size() == 0) | |
| { | |
| if (edges.size() == 0) | |
| break; | |
| int id1 = edges.begin()->first; | |
| for (auto &edge_it : edges) { | |
| int id2 = edge_it.first; | |
| RTLIL::Wire *w1 = signal_list[id1].bit.wire; | |
| RTLIL::Wire *w2 = signal_list[id2].bit.wire; | |
| if (w1 == NULL) | |
| id1 = id2; | |
| else if (w2 == NULL) | |
| continue; | |
| else if (w1->name[0] == '$' && w2->name[0] == '\\') | |
| id1 = id2; | |
| else if (w1->name[0] == '\\' && w2->name[0] == '$') | |
| continue; | |
| else if (edges[id1].size() < edges[id2].size()) | |
| id1 = id2; | |
| else if (edges[id1].size() > edges[id2].size()) | |
| continue; | |
| else if (w2->name.str() < w1->name.str()) | |
| id1 = id2; | |
| } | |
| if (edges[id1].size() == 0) { | |
| edges.erase(id1); | |
| continue; | |
| } | |
| log_assert(signal_list[id1].bit.wire != NULL); | |
| std::stringstream sstr; | |
| sstr << "$abcloop$" << (autoidx++); | |
| RTLIL::Wire *wire = module->addWire(sstr.str()); | |
| bool first_line = true; | |
| for (int id2 : edges[id1]) { | |
| if (first_line) | |
| log("Breaking loop using new signal %s: %s -> %s\n", log_signal(RTLIL::SigSpec(wire)), | |
| log_signal(signal_list[id1].bit), log_signal(signal_list[id2].bit)); | |
| else | |
| log(" %*s %s -> %s\n", int(strlen(log_signal(RTLIL::SigSpec(wire)))), "", | |
| log_signal(signal_list[id1].bit), log_signal(signal_list[id2].bit)); | |
| first_line = false; | |
| } | |
| int id3 = map_signal(RTLIL::SigSpec(wire)); | |
| signal_list[id1].is_port = true; | |
| signal_list[id3].is_port = true; | |
| log_assert(id3 == int(in_edges_count.size())); | |
| in_edges_count.push_back(0); | |
| workpool.insert(id3); | |
| for (int id2 : edges[id1]) { | |
| if (signal_list[id2].in1 == id1) | |
| signal_list[id2].in1 = id3; | |
| if (signal_list[id2].in2 == id1) | |
| signal_list[id2].in2 = id3; | |
| if (signal_list[id2].in3 == id1) | |
| signal_list[id2].in3 = id3; | |
| if (signal_list[id2].in4 == id1) | |
| signal_list[id2].in4 = id3; | |
| } | |
| edges[id1].swap(edges[id3]); | |
| module->connect(RTLIL::SigSig(signal_list[id3].bit, signal_list[id1].bit)); | |
| dump_loop_graph(dot_f, dot_nr, edges, workpool, in_edges_count); | |
| } | |
| } | |
| if (dot_f != NULL) | |
| fclose(dot_f); | |
| } | |
| std::string add_echos_to_abc_cmd(std::string str) | |
| { | |
| std::string new_str, token; | |
| for (size_t i = 0; i < str.size(); i++) { | |
| token += str[i]; | |
| if (str[i] == ';') { | |
| while (i+1 < str.size() && str[i+1] == ' ') | |
| i++; | |
| new_str += "echo + " + token + " " + token + " "; | |
| token.clear(); | |
| } | |
| } | |
| if (!token.empty()) { | |
| if (!new_str.empty()) | |
| new_str += "echo + " + token + "; "; | |
| new_str += token; | |
| } | |
| return new_str; | |
| } | |
| std::string fold_abc_cmd(std::string str) | |
| { | |
| std::string token, new_str = " "; | |
| int char_counter = 10; | |
| for (size_t i = 0; i <= str.size(); i++) { | |
| if (i < str.size()) | |
| token += str[i]; | |
| if (i == str.size() || str[i] == ';') { | |
| if (char_counter + token.size() > 75) | |
| new_str += "\n ", char_counter = 14; | |
| new_str += token, char_counter += token.size(); | |
| token.clear(); | |
| } | |
| } | |
| return new_str; | |
| } | |
| std::string replace_tempdir(std::string text, std::string tempdir_name, bool show_tempdir) | |
| { | |
| if (show_tempdir) | |
| return text; | |
| while (1) { | |
| size_t pos = text.find(tempdir_name); | |
| if (pos == std::string::npos) | |
| break; | |
| text = text.substr(0, pos) + "<abc-temp-dir>" + text.substr(pos + GetSize(tempdir_name)); | |
| } | |
| std::string selfdir_name = proc_self_dirname(); | |
| if (selfdir_name != "/") { | |
| while (1) { | |
| size_t pos = text.find(selfdir_name); | |
| if (pos == std::string::npos) | |
| break; | |
| text = text.substr(0, pos) + "<yosys-exe-dir>/" + text.substr(pos + GetSize(selfdir_name)); | |
| } | |
| } | |
| return text; | |
| } | |
| struct abc_output_filter | |
| { | |
| bool got_cr; | |
| int escape_seq_state; | |
| std::string linebuf; | |
| std::string tempdir_name; | |
| bool show_tempdir; | |
| abc_output_filter(std::string tempdir_name, bool show_tempdir) : tempdir_name(tempdir_name), show_tempdir(show_tempdir) | |
| { | |
| got_cr = false; | |
| escape_seq_state = 0; | |
| } | |
| void next_char(char ch) | |
| { | |
| if (escape_seq_state == 0 && ch == '\033') { | |
| escape_seq_state = 1; | |
| return; | |
| } | |
| if (escape_seq_state == 1) { | |
| escape_seq_state = ch == '[' ? 2 : 0; | |
| return; | |
| } | |
| if (escape_seq_state == 2) { | |
| if ((ch < '0' || '9' < ch) && ch != ';') | |
| escape_seq_state = 0; | |
| return; | |
| } | |
| escape_seq_state = 0; | |
| if (ch == '\r') { | |
| got_cr = true; | |
| return; | |
| } | |
| if (ch == '\n') { | |
| log("ABC: %s\n", replace_tempdir(linebuf, tempdir_name, show_tempdir).c_str()); | |
| got_cr = false, linebuf.clear(); | |
| return; | |
| } | |
| if (got_cr) | |
| got_cr = false, linebuf.clear(); | |
| linebuf += ch; | |
| } | |
| void next_line(const std::string &line) | |
| { | |
| int pi, po; | |
| if (sscanf(line.c_str(), "Start-point = pi%d. End-point = po%d.", &pi, &po) == 2) { | |
| log("ABC: Start-point = pi%d (%s). End-point = po%d (%s).\n", | |
| pi, pi_map.count(pi) ? pi_map.at(pi).c_str() : "???", | |
| po, po_map.count(po) ? po_map.at(po).c_str() : "???"); | |
| return; | |
| } | |
| for (char ch : line) | |
| next_char(ch); | |
| } | |
| }; | |
| void abc_module(RTLIL::Design *design, RTLIL::Module *current_module, std::string script_file, std::string exe_file, | |
| std::string liberty_file, std::string constr_file, bool cleanup, vector<int> lut_costs, bool dff_mode, std::string clk_str, | |
| bool keepff, std::string delay_target, std::string sop_inputs, std::string sop_products, std::string lutin_shared, bool fast_mode, | |
| const std::vector<RTLIL::Cell*> &cells, bool show_tempdir, bool sop_mode, bool abc_dress) | |
| { | |
| module = current_module; | |
| map_autoidx = autoidx++; | |
| signal_map.clear(); | |
| signal_list.clear(); | |
| pi_map.clear(); | |
| po_map.clear(); | |
| recover_init = false; | |
| if (clk_str != "$") | |
| { | |
| clk_polarity = true; | |
| clk_sig = RTLIL::SigSpec(); | |
| en_polarity = true; | |
| en_sig = RTLIL::SigSpec(); | |
| } | |
| if (!clk_str.empty() && clk_str != "$") | |
| { | |
| if (clk_str.find(',') != std::string::npos) { | |
| int pos = clk_str.find(','); | |
| std::string en_str = clk_str.substr(pos+1); | |
| clk_str = clk_str.substr(0, pos); | |
| if (en_str[0] == '!') { | |
| en_polarity = false; | |
| en_str = en_str.substr(1); | |
| } | |
| if (module->wires_.count(RTLIL::escape_id(en_str)) != 0) | |
| en_sig = assign_map(RTLIL::SigSpec(module->wires_.at(RTLIL::escape_id(en_str)), 0)); | |
| } | |
| if (clk_str[0] == '!') { | |
| clk_polarity = false; | |
| clk_str = clk_str.substr(1); | |
| } | |
| if (module->wires_.count(RTLIL::escape_id(clk_str)) != 0) | |
| clk_sig = assign_map(RTLIL::SigSpec(module->wires_.at(RTLIL::escape_id(clk_str)), 0)); | |
| } | |
| if (dff_mode && clk_sig.empty()) | |
| log_cmd_error("Clock domain %s not found.\n", clk_str.c_str()); | |
| std::string tempdir_name = "/tmp/yosys-abc-XXXXXX"; | |
| if (!cleanup) | |
| tempdir_name[0] = tempdir_name[4] = '_'; | |
| tempdir_name = make_temp_dir(tempdir_name); | |
| log_header(design, "Extracting gate netlist of module `%s' to `%s/input.blif'..\n", | |
| module->name.c_str(), replace_tempdir(tempdir_name, tempdir_name, show_tempdir).c_str()); | |
| std::string abc_script = stringf("read_blif %s/input.blif; ", tempdir_name.c_str()); | |
| if (!liberty_file.empty()) { | |
| abc_script += stringf("read_lib -w %s; ", liberty_file.c_str()); | |
| if (!constr_file.empty()) | |
| abc_script += stringf("read_constr -v %s; ", constr_file.c_str()); | |
| } else | |
| if (!lut_costs.empty()) | |
| abc_script += stringf("read_lut %s/lutdefs.txt; ", tempdir_name.c_str()); | |
| else | |
| abc_script += stringf("read_library %s/stdcells.genlib; ", tempdir_name.c_str()); | |
| if (!script_file.empty()) { | |
| if (script_file[0] == '+') { | |
| for (size_t i = 1; i < script_file.size(); i++) | |
| if (script_file[i] == '\'') | |
| abc_script += "'\\''"; | |
| else if (script_file[i] == ',') | |
| abc_script += " "; | |
| else | |
| abc_script += script_file[i]; | |
| } else | |
| abc_script += stringf("source %s", script_file.c_str()); | |
| } else if (!lut_costs.empty()) { | |
| bool all_luts_cost_same = true; | |
| for (int this_cost : lut_costs) | |
| if (this_cost != lut_costs.front()) | |
| all_luts_cost_same = false; | |
| abc_script += fast_mode ? ABC_FAST_COMMAND_LUT : ABC_COMMAND_LUT; | |
| if (all_luts_cost_same && !fast_mode) | |
| abc_script += "; lutpack {S}"; | |
| } else if (!liberty_file.empty()) | |
| abc_script += constr_file.empty() ? (fast_mode ? ABC_FAST_COMMAND_LIB : ABC_COMMAND_LIB) : (fast_mode ? ABC_FAST_COMMAND_CTR : ABC_COMMAND_CTR); | |
| else if (sop_mode) | |
| abc_script += fast_mode ? ABC_FAST_COMMAND_SOP : ABC_COMMAND_SOP; | |
| else | |
| abc_script += fast_mode ? ABC_FAST_COMMAND_DFL : ABC_COMMAND_DFL; | |
| for (size_t pos = abc_script.find("{D}"); pos != std::string::npos; pos = abc_script.find("{D}", pos)) | |
| abc_script = abc_script.substr(0, pos) + delay_target + abc_script.substr(pos+3); | |
| for (size_t pos = abc_script.find("{I}"); pos != std::string::npos; pos = abc_script.find("{D}", pos)) | |
| abc_script = abc_script.substr(0, pos) + sop_inputs + abc_script.substr(pos+3); | |
| for (size_t pos = abc_script.find("{P}"); pos != std::string::npos; pos = abc_script.find("{D}", pos)) | |
| abc_script = abc_script.substr(0, pos) + sop_products + abc_script.substr(pos+3); | |
| for (size_t pos = abc_script.find("{S}"); pos != std::string::npos; pos = abc_script.find("{S}", pos)) | |
| abc_script = abc_script.substr(0, pos) + lutin_shared + abc_script.substr(pos+3); | |
| if (abc_dress) | |
| abc_script += "; dress"; | |
| abc_script += stringf("; write_blif %s/output.blif", tempdir_name.c_str()); | |
| abc_script = add_echos_to_abc_cmd(abc_script); | |
| for (size_t i = 0; i+1 < abc_script.size(); i++) | |
| if (abc_script[i] == ';' && abc_script[i+1] == ' ') | |
| abc_script[i+1] = '\n'; | |
| FILE *f = fopen(stringf("%s/abc.script", tempdir_name.c_str()).c_str(), "wt"); | |
| fprintf(f, "%s\n", abc_script.c_str()); | |
| fclose(f); | |
| if (dff_mode || !clk_str.empty()) | |
| { | |
| if (clk_sig.size() == 0) | |
| log("No%s clock domain found. Not extracting any FF cells.\n", clk_str.empty() ? "" : " matching"); | |
| else { | |
| log("Found%s %s clock domain: %s", clk_str.empty() ? "" : " matching", clk_polarity ? "posedge" : "negedge", log_signal(clk_sig)); | |
| if (en_sig.size() != 0) | |
| log(", enabled by %s%s", en_polarity ? "" : "!", log_signal(en_sig)); | |
| log("\n"); | |
| } | |
| } | |
| for (auto c : cells) | |
| extract_cell(c, keepff); | |
| for (auto &wire_it : module->wires_) { | |
| if (wire_it.second->port_id > 0 || wire_it.second->get_bool_attribute(ID::keep)) | |
| mark_port(RTLIL::SigSpec(wire_it.second)); | |
| } | |
| for (auto &cell_it : module->cells_) | |
| for (auto &port_it : cell_it.second->connections()) | |
| mark_port(port_it.second); | |
| if (clk_sig.size() != 0) | |
| mark_port(clk_sig); | |
| if (en_sig.size() != 0) | |
| mark_port(en_sig); | |
| handle_loops(); | |
| std::string buffer = stringf("%s/input.blif", tempdir_name.c_str()); | |
| f = fopen(buffer.c_str(), "wt"); | |
| if (f == NULL) | |
| log_error("Opening %s for writing failed: %s\n", buffer.c_str(), strerror(errno)); | |
| fprintf(f, ".model netlist\n"); | |
| int count_input = 0; | |
| fprintf(f, ".inputs"); | |
| for (auto &si : signal_list) { | |
| if (!si.is_port || si.type != G(NONE)) | |
| continue; | |
| fprintf(f, " ys__n%d", si.id); | |
| pi_map[count_input++] = log_signal(si.bit); | |
| } | |
| if (count_input == 0) | |
| fprintf(f, " dummy_input\n"); | |
| fprintf(f, "\n"); | |
| int count_output = 0; | |
| fprintf(f, ".outputs"); | |
| for (auto &si : signal_list) { | |
| if (!si.is_port || si.type == G(NONE)) | |
| continue; | |
| fprintf(f, " ys__n%d", si.id); | |
| po_map[count_output++] = log_signal(si.bit); | |
| } | |
| fprintf(f, "\n"); | |
| for (auto &si : signal_list) | |
| fprintf(f, "# ys__n%-5d %s\n", si.id, log_signal(si.bit)); | |
| for (auto &si : signal_list) { | |
| if (si.bit.wire == NULL) { | |
| fprintf(f, ".names ys__n%d\n", si.id); | |
| if (si.bit == RTLIL::State::S1) | |
| fprintf(f, "1\n"); | |
| } | |
| } | |
| int count_gates = 0; | |
| for (auto &si : signal_list) { | |
| if (si.type == G(BUF)) { | |
| fprintf(f, ".names ys__n%d ys__n%d\n", si.in1, si.id); | |
| fprintf(f, "1 1\n"); | |
| } else if (si.type == G(NOT)) { | |
| fprintf(f, ".names ys__n%d ys__n%d\n", si.in1, si.id); | |
| fprintf(f, "0 1\n"); | |
| } else if (si.type == G(AND)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "11 1\n"); | |
| } else if (si.type == G(NAND)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "0- 1\n"); | |
| fprintf(f, "-0 1\n"); | |
| } else if (si.type == G(OR)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "-1 1\n"); | |
| fprintf(f, "1- 1\n"); | |
| } else if (si.type == G(NOR)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "00 1\n"); | |
| } else if (si.type == G(XOR)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "01 1\n"); | |
| fprintf(f, "10 1\n"); | |
| } else if (si.type == G(XNOR)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "00 1\n"); | |
| fprintf(f, "11 1\n"); | |
| } else if (si.type == G(ANDNOT)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "10 1\n"); | |
| } else if (si.type == G(ORNOT)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.id); | |
| fprintf(f, "1- 1\n"); | |
| fprintf(f, "-0 1\n"); | |
| } else if (si.type == G(MUX)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.in3, si.id); | |
| fprintf(f, "1-0 1\n"); | |
| fprintf(f, "-11 1\n"); | |
| } else if (si.type == G(NMUX)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.in3, si.id); | |
| fprintf(f, "0-0 1\n"); | |
| fprintf(f, "-01 1\n"); | |
| } else if (si.type == G(AOI3)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.in3, si.id); | |
| fprintf(f, "-00 1\n"); | |
| fprintf(f, "0-0 1\n"); | |
| } else if (si.type == G(OAI3)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.in3, si.id); | |
| fprintf(f, "00- 1\n"); | |
| fprintf(f, "--0 1\n"); | |
| } else if (si.type == G(AOI4)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.in3, si.in4, si.id); | |
| fprintf(f, "-0-0 1\n"); | |
| fprintf(f, "-00- 1\n"); | |
| fprintf(f, "0--0 1\n"); | |
| fprintf(f, "0-0- 1\n"); | |
| } else if (si.type == G(OAI4)) { | |
| fprintf(f, ".names ys__n%d ys__n%d ys__n%d ys__n%d ys__n%d\n", si.in1, si.in2, si.in3, si.in4, si.id); | |
| fprintf(f, "00-- 1\n"); | |
| fprintf(f, "--00 1\n"); | |
| } else if (si.type == G(FF)) { | |
| if (si.init == State::S0 || si.init == State::S1) { | |
| fprintf(f, ".latch ys__n%d ys__n%d %d\n", si.in1, si.id, si.init == State::S1 ? 1 : 0); | |
| recover_init = true; | |
| } else | |
| fprintf(f, ".latch ys__n%d ys__n%d 2\n", si.in1, si.id); | |
| } else if (si.type != G(NONE)) | |
| log_abort(); | |
| if (si.type != G(NONE)) | |
| count_gates++; | |
| } | |
| fprintf(f, ".end\n"); | |
| fclose(f); | |
| log("Extracted %d gates and %d wires to a netlist network with %d inputs and %d outputs.\n", | |
| count_gates, GetSize(signal_list), count_input, count_output); | |
| log_push(); | |
| if (count_output > 0) | |
| { | |
| log_header(design, "Executing ABC.\n"); | |
| auto &cell_cost = cmos_cost ? CellCosts::cmos_gate_cost() : CellCosts::default_gate_cost(); | |
| buffer = stringf("%s/stdcells.genlib", tempdir_name.c_str()); | |
| f = fopen(buffer.c_str(), "wt"); | |
| if (f == NULL) | |
| log_error("Opening %s for writing failed: %s\n", buffer.c_str(), strerror(errno)); | |
| fprintf(f, "GATE ZERO 1 Y=CONST0;\n"); | |
| fprintf(f, "GATE ONE 1 Y=CONST1;\n"); | |
| fprintf(f, "GATE BUF %d Y=A; PIN * NONINV 1 999 1 0 1 0\n", cell_cost.at(ID($_BUF_))); | |
| fprintf(f, "GATE NOT %d Y=!A; PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_NOT_))); | |
| if (enabled_gates.count("AND")) | |
| fprintf(f, "GATE AND %d Y=A*B; PIN * NONINV 1 999 1 0 1 0\n", cell_cost.at(ID($_AND_))); | |
| if (enabled_gates.count("NAND")) | |
| fprintf(f, "GATE NAND %d Y=!(A*B); PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_NAND_))); | |
| if (enabled_gates.count("OR")) | |
| fprintf(f, "GATE OR %d Y=A+B; PIN * NONINV 1 999 1 0 1 0\n", cell_cost.at(ID($_OR_))); | |
| if (enabled_gates.count("NOR")) | |
| fprintf(f, "GATE NOR %d Y=!(A+B); PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_NOR_))); | |
| if (enabled_gates.count("XOR")) | |
| fprintf(f, "GATE XOR %d Y=(A*!B)+(!A*B); PIN * UNKNOWN 1 999 1 0 1 0\n", cell_cost.at(ID($_XOR_))); | |
| if (enabled_gates.count("XNOR")) | |
| fprintf(f, "GATE XNOR %d Y=(A*B)+(!A*!B); PIN * UNKNOWN 1 999 1 0 1 0\n", cell_cost.at(ID($_XNOR_))); | |
| if (enabled_gates.count("ANDNOT")) | |
| fprintf(f, "GATE ANDNOT %d Y=A*!B; PIN * UNKNOWN 1 999 1 0 1 0\n", cell_cost.at(ID($_ANDNOT_))); | |
| if (enabled_gates.count("ORNOT")) | |
| fprintf(f, "GATE ORNOT %d Y=A+!B; PIN * UNKNOWN 1 999 1 0 1 0\n", cell_cost.at(ID($_ORNOT_))); | |
| if (enabled_gates.count("AOI3")) | |
| fprintf(f, "GATE AOI3 %d Y=!((A*B)+C); PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_AOI3_))); | |
| if (enabled_gates.count("OAI3")) | |
| fprintf(f, "GATE OAI3 %d Y=!((A+B)*C); PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_OAI3_))); | |
| if (enabled_gates.count("AOI4")) | |
| fprintf(f, "GATE AOI4 %d Y=!((A*B)+(C*D)); PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_AOI4_))); | |
| if (enabled_gates.count("OAI4")) | |
| fprintf(f, "GATE OAI4 %d Y=!((A+B)*(C+D)); PIN * INV 1 999 1 0 1 0\n", cell_cost.at(ID($_OAI4_))); | |
| if (enabled_gates.count("MUX")) | |
| fprintf(f, "GATE MUX %d Y=(A*B)+(S*B)+(!S*A); PIN * UNKNOWN 1 999 1 0 1 0\n", cell_cost.at(ID($_MUX_))); | |
| if (enabled_gates.count("NMUX")) | |
| fprintf(f, "GATE NMUX %d Y=!((A*B)+(S*B)+(!S*A)); PIN * UNKNOWN 1 999 1 0 1 0\n", cell_cost.at(ID($_NMUX_))); | |
| if (map_mux4) | |
| fprintf(f, "GATE MUX4 %d Y=(!S*!T*A)+(S*!T*B)+(!S*T*C)+(S*T*D); PIN * UNKNOWN 1 999 1 0 1 0\n", 2*cell_cost.at(ID($_MUX_))); | |
| if (map_mux8) | |
| fprintf(f, "GATE MUX8 %d Y=(!S*!T*!U*A)+(S*!T*!U*B)+(!S*T*!U*C)+(S*T*!U*D)+(!S*!T*U*E)+(S*!T*U*F)+(!S*T*U*G)+(S*T*U*H); PIN * UNKNOWN 1 999 1 0 1 0\n", 4*cell_cost.at(ID($_MUX_))); | |
| if (map_mux16) | |
| fprintf(f, "GATE MUX16 %d Y=(!S*!T*!U*!V*A)+(S*!T*!U*!V*B)+(!S*T*!U*!V*C)+(S*T*!U*!V*D)+(!S*!T*U*!V*E)+(S*!T*U*!V*F)+(!S*T*U*!V*G)+(S*T*U*!V*H)+(!S*!T*!U*V*I)+(S*!T*!U*V*J)+(!S*T*!U*V*K)+(S*T*!U*V*L)+(!S*!T*U*V*M)+(S*!T*U*V*N)+(!S*T*U*V*O)+(S*T*U*V*P); PIN * UNKNOWN 1 999 1 0 1 0\n", 8*cell_cost.at(ID($_MUX_))); | |
| fclose(f); | |
| if (!lut_costs.empty()) { | |
| buffer = stringf("%s/lutdefs.txt", tempdir_name.c_str()); | |
| f = fopen(buffer.c_str(), "wt"); | |
| if (f == NULL) | |
| log_error("Opening %s for writing failed: %s\n", buffer.c_str(), strerror(errno)); | |
| for (int i = 0; i < GetSize(lut_costs); i++) | |
| fprintf(f, "%d %d.00 1.00\n", i+1, lut_costs.at(i)); | |
| fclose(f); | |
| } | |
| buffer = stringf("%s -s -f %s/abc.script 2>&1", exe_file.c_str(), tempdir_name.c_str()); | |
| log("Running ABC command: %s\n", replace_tempdir(buffer, tempdir_name, show_tempdir).c_str()); | |
| #ifndef YOSYS_LINK_ABC | |
| abc_output_filter filt(tempdir_name, show_tempdir); | |
| int ret = run_command(buffer, std::bind(&abc_output_filter::next_line, filt, std::placeholders::_1)); | |
| #else | |
| // These needs to be mutable, supposedly due to getopt | |
| char *abc_argv[5]; | |
| string tmp_script_name = stringf("%s/abc.script", tempdir_name.c_str()); | |
| abc_argv[0] = strdup(exe_file.c_str()); | |
| abc_argv[1] = strdup("-s"); | |
| abc_argv[2] = strdup("-f"); | |
| abc_argv[3] = strdup(tmp_script_name.c_str()); | |
| abc_argv[4] = 0; | |
| int ret = Abc_RealMain(4, abc_argv); | |
| free(abc_argv[0]); | |
| free(abc_argv[1]); | |
| free(abc_argv[2]); | |
| free(abc_argv[3]); | |
| #endif | |
| if (ret != 0) | |
| log_error("ABC: execution of command \"%s\" failed: return code %d.\n", buffer.c_str(), ret); | |
| buffer = stringf("%s/%s", tempdir_name.c_str(), "output.blif"); | |
| std::ifstream ifs; | |
| ifs.open(buffer); | |
| if (ifs.fail()) | |
| log_error("Can't open ABC output file `%s'.\n", buffer.c_str()); | |
| bool builtin_lib = liberty_file.empty(); | |
| RTLIL::Design *mapped_design = new RTLIL::Design; | |
| parse_blif(mapped_design, ifs, builtin_lib ? ID(DFF) : ID(_dff_), false, sop_mode); | |
| ifs.close(); | |
| log_header(design, "Re-integrating ABC results.\n"); | |
| RTLIL::Module *mapped_mod = mapped_design->modules_[ID(netlist)]; | |
| if (mapped_mod == NULL) | |
| log_error("ABC output file does not contain a module `netlist'.\n"); | |
| for (auto &it : mapped_mod->wires_) { | |
| RTLIL::Wire *w = it.second; | |
| RTLIL::Wire *orig_wire = nullptr; | |
| RTLIL::Wire *wire = module->addWire(remap_name(w->name, &orig_wire)); | |
| if (orig_wire != nullptr && orig_wire->attributes.count(ID(src))) | |
| wire->attributes[ID(src)] = orig_wire->attributes[ID(src)]; | |
| if (markgroups) wire->attributes[ID(abcgroup)] = map_autoidx; | |
| design->select(module, wire); | |
| } | |
| std::map<std::string, int> cell_stats; | |
| for (auto c : mapped_mod->cells()) | |
| { | |
| if (builtin_lib) | |
| { | |
| cell_stats[RTLIL::unescape_id(c->type)]++; | |
| if (c->type.in(ID(ZERO), ID(ONE))) { | |
| RTLIL::SigSig conn; | |
| conn.first = RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)]); | |
| conn.second = RTLIL::SigSpec(c->type == ID(ZERO) ? 0 : 1, 1); | |
| module->connect(conn); | |
| continue; | |
| } | |
| if (c->type == ID(BUF)) { | |
| RTLIL::SigSig conn; | |
| conn.first = RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)]); | |
| conn.second = RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)]); | |
| module->connect(conn); | |
| continue; | |
| } | |
| if (c->type == ID(NOT)) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), ID($_NOT_)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type.in(ID(AND), ID(OR), ID(XOR), ID(NAND), ID(NOR), ID(XNOR), ID(ANDNOT), ID(ORNOT))) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), stringf("$_%s_", c->type.c_str()+1)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type.in(ID(MUX), ID(NMUX))) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), stringf("$_%s_", c->type.c_str()+1)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID(S), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(S)).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type == ID(MUX4)) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), ID($_MUX4_)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID(C), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(C)).as_wire()->name)])); | |
| cell->setPort(ID(D), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(D)).as_wire()->name)])); | |
| cell->setPort(ID(S), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(S)).as_wire()->name)])); | |
| cell->setPort(ID(T), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(T)).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type == ID(MUX8)) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), ID($_MUX8_)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID(C), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(C)).as_wire()->name)])); | |
| cell->setPort(ID(D), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(D)).as_wire()->name)])); | |
| cell->setPort(ID(E), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(E)).as_wire()->name)])); | |
| cell->setPort(ID(F), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(F)).as_wire()->name)])); | |
| cell->setPort(ID(G), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(G)).as_wire()->name)])); | |
| cell->setPort(ID(H), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(H)).as_wire()->name)])); | |
| cell->setPort(ID(S), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(S)).as_wire()->name)])); | |
| cell->setPort(ID(T), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(T)).as_wire()->name)])); | |
| cell->setPort(ID(U), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(U)).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type == ID(MUX16)) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), ID($_MUX16_)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID(C), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(C)).as_wire()->name)])); | |
| cell->setPort(ID(D), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(D)).as_wire()->name)])); | |
| cell->setPort(ID(E), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(E)).as_wire()->name)])); | |
| cell->setPort(ID(F), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(F)).as_wire()->name)])); | |
| cell->setPort(ID(G), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(G)).as_wire()->name)])); | |
| cell->setPort(ID(H), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(H)).as_wire()->name)])); | |
| cell->setPort(ID(I), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(I)).as_wire()->name)])); | |
| cell->setPort(ID(J), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(J)).as_wire()->name)])); | |
| cell->setPort(ID(K), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(K)).as_wire()->name)])); | |
| cell->setPort(ID(L), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(L)).as_wire()->name)])); | |
| cell->setPort(ID(M), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(M)).as_wire()->name)])); | |
| cell->setPort(ID(N), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(N)).as_wire()->name)])); | |
| cell->setPort(ID(O), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(O)).as_wire()->name)])); | |
| cell->setPort(ID(P), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(P)).as_wire()->name)])); | |
| cell->setPort(ID(S), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(S)).as_wire()->name)])); | |
| cell->setPort(ID(T), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(T)).as_wire()->name)])); | |
| cell->setPort(ID(U), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(U)).as_wire()->name)])); | |
| cell->setPort(ID(V), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(V)).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type.in(ID(AOI3), ID(OAI3))) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), stringf("$_%s_", c->type.c_str()+1)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID(C), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(C)).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type.in(ID(AOI4), ID(OAI4))) { | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), stringf("$_%s_", c->type.c_str()+1)); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID::A, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)])); | |
| cell->setPort(ID::B, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::B).as_wire()->name)])); | |
| cell->setPort(ID(C), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(C)).as_wire()->name)])); | |
| cell->setPort(ID(D), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(D)).as_wire()->name)])); | |
| cell->setPort(ID::Y, RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)])); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type == ID(DFF)) { | |
| log_assert(clk_sig.size() == 1); | |
| RTLIL::Cell *cell; | |
| if (en_sig.size() == 0) { | |
| cell = module->addCell(remap_name(c->name), clk_polarity ? ID($_DFF_P_) : ID($_DFF_N_)); | |
| } else { | |
| log_assert(en_sig.size() == 1); | |
| cell = module->addCell(remap_name(c->name), stringf("$_DFFE_%c%c_", clk_polarity ? 'P' : 'N', en_polarity ? 'P' : 'N')); | |
| cell->setPort(ID(E), en_sig); | |
| } | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID(D), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(D)).as_wire()->name)])); | |
| cell->setPort(ID(Q), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(Q)).as_wire()->name)])); | |
| cell->setPort(ID(C), clk_sig); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| } | |
| else | |
| cell_stats[RTLIL::unescape_id(c->type)]++; | |
| if (c->type.in(ID(_const0_), ID(_const1_))) { | |
| RTLIL::SigSig conn; | |
| conn.first = RTLIL::SigSpec(module->wires_[remap_name(c->connections().begin()->second.as_wire()->name)]); | |
| conn.second = RTLIL::SigSpec(c->type == ID(_const0_) ? 0 : 1, 1); | |
| module->connect(conn); | |
| continue; | |
| } | |
| if (c->type == ID(_dff_)) { | |
| log_assert(clk_sig.size() == 1); | |
| RTLIL::Cell *cell; | |
| if (en_sig.size() == 0) { | |
| cell = module->addCell(remap_name(c->name), clk_polarity ? ID($_DFF_P_) : ID($_DFF_N_)); | |
| } else { | |
| log_assert(en_sig.size() == 1); | |
| cell = module->addCell(remap_name(c->name), stringf("$_DFFE_%c%c_", clk_polarity ? 'P' : 'N', en_polarity ? 'P' : 'N')); | |
| cell->setPort(ID(E), en_sig); | |
| } | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->setPort(ID(D), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(D)).as_wire()->name)])); | |
| cell->setPort(ID(Q), RTLIL::SigSpec(module->wires_[remap_name(c->getPort(ID(Q)).as_wire()->name)])); | |
| cell->setPort(ID(C), clk_sig); | |
| design->select(module, cell); | |
| continue; | |
| } | |
| if (c->type == ID($lut) && GetSize(c->getPort(ID::A)) == 1 && c->getParam(ID(LUT)).as_int() == 2) { | |
| SigSpec my_a = module->wires_[remap_name(c->getPort(ID::A).as_wire()->name)]; | |
| SigSpec my_y = module->wires_[remap_name(c->getPort(ID::Y).as_wire()->name)]; | |
| module->connect(my_y, my_a); | |
| continue; | |
| } | |
| RTLIL::Cell *cell = module->addCell(remap_name(c->name), c->type); | |
| if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx; | |
| cell->parameters = c->parameters; | |
| for (auto &conn : c->connections()) { | |
| RTLIL::SigSpec newsig; | |
| for (auto &c : conn.second.chunks()) { | |
| if (c.width == 0) | |
| continue; | |
| log_assert(c.width == 1); | |
| newsig.append(module->wires_[remap_name(c.wire->name)]); | |
| } | |
| cell->setPort(conn.first, newsig); | |
| } | |
| design->select(module, cell); | |
| } | |
| for (auto conn : mapped_mod->connections()) { | |
| if (!conn.first.is_fully_const()) | |
| conn.first = RTLIL::SigSpec(module->wires_[remap_name(conn.first.as_wire()->name)]); | |
| if (!conn.second.is_fully_const()) | |
| conn.second = RTLIL::SigSpec(module->wires_[remap_name(conn.second.as_wire()->name)]); | |
| module->connect(conn); | |
| } | |
| if (recover_init) | |
| for (auto wire : mapped_mod->wires()) { | |
| if (wire->attributes.count(ID(init))) { | |
| Wire *w = module->wires_[remap_name(wire->name)]; | |
| log_assert(w->attributes.count(ID(init)) == 0); | |
| w->attributes[ID(init)] = wire->attributes.at(ID(init)); | |
| } | |
| } | |
| for (auto &it : cell_stats) | |
| log("ABC RESULTS: %15s cells: %8d\n", it.first.c_str(), it.second); | |
| int in_wires = 0, out_wires = 0; | |
| for (auto &si : signal_list) | |
| if (si.is_port) { | |
| char buffer[100]; | |
| snprintf(buffer, 100, "\\ys__n%d", si.id); | |
| RTLIL::SigSig conn; | |
| if (si.type != G(NONE)) { | |
| conn.first = si.bit; | |
| conn.second = RTLIL::SigSpec(module->wires_[remap_name(buffer)]); | |
| out_wires++; | |
| } else { | |
| conn.first = RTLIL::SigSpec(module->wires_[remap_name(buffer)]); | |
| conn.second = si.bit; | |
| in_wires++; | |
| } | |
| module->connect(conn); | |
| } | |
| log("ABC RESULTS: internal signals: %8d\n", int(signal_list.size()) - in_wires - out_wires); | |
| log("ABC RESULTS: input signals: %8d\n", in_wires); | |
| log("ABC RESULTS: output signals: %8d\n", out_wires); | |
| delete mapped_design; | |
| } | |
| else | |
| { | |
| log("Don't call ABC as there is nothing to map.\n"); | |
| } | |
| if (cleanup) | |
| { | |
| log("Removing temp directory.\n"); | |
| remove_directory(tempdir_name); | |
| } | |
| log_pop(); | |
| } | |
| struct AbcPass : public Pass { | |
| AbcPass() : Pass("abc", "use ABC for technology mapping") { } | |
| void help() YS_OVERRIDE | |
| { | |
| // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---| | |
| log("\n"); | |
| log(" abc [options] [selection]\n"); | |
| log("\n"); | |
| log("This pass uses the ABC tool [1] for technology mapping of yosys's internal gate\n"); | |
| log("library to a target architecture.\n"); | |
| log("\n"); | |
| log(" -exe <command>\n"); | |
| #ifdef ABCEXTERNAL | |
| log(" use the specified command instead of \"" ABCEXTERNAL "\" to execute ABC.\n"); | |
| #else | |
| log(" use the specified command instead of \"<yosys-bindir>/yosys-abc\" to execute ABC.\n"); | |
| #endif | |
| log(" This can e.g. be used to call a specific version of ABC or a wrapper.\n"); | |
| log("\n"); | |
| log(" -script <file>\n"); | |
| log(" use the specified ABC script file instead of the default script.\n"); | |
| log("\n"); | |
| log(" if <file> starts with a plus sign (+), then the rest of the filename\n"); | |
| log(" string is interpreted as the command string to be passed to ABC. The\n"); | |
| log(" leading plus sign is removed and all commas (,) in the string are\n"); | |
| log(" replaced with blanks before the string is passed to ABC.\n"); | |
| log("\n"); | |
| log(" if no -script parameter is given, the following scripts are used:\n"); | |
| log("\n"); | |
| log(" for -liberty without -constr:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_COMMAND_LIB).c_str()); | |
| log("\n"); | |
| log(" for -liberty with -constr:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_COMMAND_CTR).c_str()); | |
| log("\n"); | |
| log(" for -lut/-luts (only one LUT size):\n"); | |
| log("%s\n", fold_abc_cmd(ABC_COMMAND_LUT "; lutpack {S}").c_str()); | |
| log("\n"); | |
| log(" for -lut/-luts (different LUT sizes):\n"); | |
| log("%s\n", fold_abc_cmd(ABC_COMMAND_LUT).c_str()); | |
| log("\n"); | |
| log(" for -sop:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_COMMAND_SOP).c_str()); | |
| log("\n"); | |
| log(" otherwise:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_COMMAND_DFL).c_str()); | |
| log("\n"); | |
| log(" -fast\n"); | |
| log(" use different default scripts that are slightly faster (at the cost\n"); | |
| log(" of output quality):\n"); | |
| log("\n"); | |
| log(" for -liberty without -constr:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_LIB).c_str()); | |
| log("\n"); | |
| log(" for -liberty with -constr:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_CTR).c_str()); | |
| log("\n"); | |
| log(" for -lut/-luts:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_LUT).c_str()); | |
| log("\n"); | |
| log(" for -sop:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_SOP).c_str()); | |
| log("\n"); | |
| log(" otherwise:\n"); | |
| log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_DFL).c_str()); | |
| log("\n"); | |
| log(" -liberty <file>\n"); | |
| log(" generate netlists for the specified cell library (using the liberty\n"); | |
| log(" file format).\n"); | |
| log("\n"); | |
| log(" -constr <file>\n"); | |
| log(" pass this file with timing constraints to ABC. use with -liberty.\n"); | |
| log("\n"); | |
| log(" a constr file contains two lines:\n"); | |
| log(" set_driving_cell <cell_name>\n"); | |
| log(" set_load <floating_point_number>\n"); | |
| log("\n"); | |
| log(" the set_driving_cell statement defines which cell type is assumed to\n"); | |
| log(" drive the primary inputs and the set_load statement sets the load in\n"); | |
| log(" femtofarads for each primary output.\n"); | |
| log("\n"); | |
| log(" -D <picoseconds>\n"); | |
| log(" set delay target. the string {D} in the default scripts above is\n"); | |
| log(" replaced by this option when used, and an empty string otherwise.\n"); | |
| log(" this also replaces 'dretime' with 'dretime; retime -o {D}' in the\n"); | |
| log(" default scripts above.\n"); | |
| log("\n"); | |
| log(" -I <num>\n"); | |
| log(" maximum number of SOP inputs.\n"); | |
| log(" (replaces {I} in the default scripts above)\n"); | |
| log("\n"); | |
| log(" -P <num>\n"); | |
| log(" maximum number of SOP products.\n"); | |
| log(" (replaces {P} in the default scripts above)\n"); | |
| log("\n"); | |
| log(" -S <num>\n"); | |
| log(" maximum number of LUT inputs shared.\n"); | |
| log(" (replaces {S} in the default scripts above, default: -S 1)\n"); | |
| log("\n"); | |
| log(" -lut <width>\n"); | |
| log(" generate netlist using luts of (max) the specified width.\n"); | |
| log("\n"); | |
| log(" -lut <w1>:<w2>\n"); | |
| log(" generate netlist using luts of (max) the specified width <w2>. All\n"); | |
| log(" luts with width <= <w1> have constant cost. for luts larger than <w1>\n"); | |
| log(" the area cost doubles with each additional input bit. the delay cost\n"); | |
| log(" is still constant for all lut widths.\n"); | |
| log("\n"); | |
| log(" -luts <cost1>,<cost2>,<cost3>,<sizeN>:<cost4-N>,..\n"); | |
| log(" generate netlist using luts. Use the specified costs for luts with 1,\n"); | |
| log(" 2, 3, .. inputs.\n"); | |
| log("\n"); | |
| log(" -sop\n"); | |
| log(" map to sum-of-product cells and inverters\n"); | |
| log("\n"); | |
| // log(" -mux4, -mux8, -mux16\n"); | |
| // log(" try to extract 4-input, 8-input, and/or 16-input muxes\n"); | |
| // log(" (ignored when used with -liberty or -lut)\n"); | |
| // log("\n"); | |
| log(" -g type1,type2,...\n"); | |
| log(" Map to the specified list of gate types. Supported gates types are:\n"); | |
| // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---| | |
| log(" AND, NAND, OR, NOR, XOR, XNOR, ANDNOT, ORNOT, MUX,\n"); | |
| log(" NMUX, AOI3, OAI3, AOI4, OAI4.\n"); | |
| log(" (The NOT gate is always added to this list automatically.)\n"); | |
| log("\n"); | |
| log(" The following aliases can be used to reference common sets of gate types:\n"); | |
| log(" simple: AND OR XOR MUX\n"); | |
| log(" cmos2: NAND NOR\n"); | |
| log(" cmos3: NAND NOR AOI3 OAI3\n"); | |
| log(" cmos4: NAND NOR AOI3 OAI3 AOI4 OAI4\n"); | |
| log(" cmos: NAND NOR AOI3 OAI3 AOI4 OAI4 NMUX MUX XOR XNOR\n"); | |
| log(" gates: AND NAND OR NOR XOR XNOR ANDNOT ORNOT\n"); | |
| log(" aig: AND NAND OR NOR ANDNOT ORNOT\n"); | |
| log("\n"); | |
| log(" The alias 'all' represent the full set of all gate types.\n"); | |
| log("\n"); | |
| log(" Prefix a gate type with a '-' to remove it from the list. For example\n"); | |
| log(" the arguments 'AND,OR,XOR' and 'simple,-MUX' are equivalent.\n"); | |
| log("\n"); | |
| log(" The default is 'all,-NMUX,-AOI3,-OAI3,-AOI4,-OAI4'.\n"); | |
| log("\n"); | |
| log(" -dff\n"); | |
| log(" also pass $_DFF_?_ and $_DFFE_??_ cells through ABC. modules with many\n"); | |
| log(" clock domains are automatically partitioned in clock domains and each\n"); | |
| log(" domain is passed through ABC independently.\n"); | |
| log("\n"); | |
| log(" -clk [!]<clock-signal-name>[,[!]<enable-signal-name>]\n"); | |
| log(" use only the specified clock domain. this is like -dff, but only FF\n"); | |
| log(" cells that belong to the specified clock domain are used.\n"); | |
| log("\n"); | |
| log(" -keepff\n"); | |
| log(" set the \"keep\" attribute on flip-flop output wires. (and thus preserve\n"); | |
| log(" them, for example for equivalence checking.)\n"); | |
| log("\n"); | |
| log(" -nocleanup\n"); | |
| log(" when this option is used, the temporary files created by this pass\n"); | |
| log(" are not removed. this is useful for debugging.\n"); | |
| log("\n"); | |
| log(" -showtmp\n"); | |
| log(" print the temp dir name in log. usually this is suppressed so that the\n"); | |
| log(" command output is identical across runs.\n"); | |
| log("\n"); | |
| log(" -markgroups\n"); | |
| log(" set a 'abcgroup' attribute on all objects created by ABC. The value of\n"); | |
| log(" this attribute is a unique integer for each ABC process started. This\n"); | |
| log(" is useful for debugging the partitioning of clock domains.\n"); | |
| log("\n"); | |
| log(" -dress\n"); | |
| log(" run the 'dress' command after all other ABC commands. This aims to\n"); | |
| log(" preserve naming by an equivalence check between the original and post-ABC\n"); | |
| log(" netlists (experimental).\n"); | |
| log("\n"); | |
| log("When neither -liberty nor -lut is used, the Yosys standard cell library is\n"); | |
| log("loaded into ABC before the ABC script is executed.\n"); | |
| log("\n"); | |
| log("Note that this is a logic optimization pass within Yosys that is calling ABC\n"); | |
| log("internally. This is not going to \"run ABC on your design\". It will instead run\n"); | |
| log("ABC on logic snippets extracted from your design. You will not get any useful\n"); | |
| log("output when passing an ABC script that writes a file. Instead write your full\n"); | |
| log("design as BLIF file with write_blif and then load that into ABC externally if\n"); | |
| log("you want to use ABC to convert your design into another format.\n"); | |
| log("\n"); | |
| log("[1] http://www.eecs.berkeley.edu/~alanmi/abc/\n"); | |
| log("\n"); | |
| } | |
| void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE | |
| { | |
| log_header(design, "Executing ABC pass (technology mapping using ABC).\n"); | |
| log_push(); | |
| assign_map.clear(); | |
| signal_list.clear(); | |
| signal_map.clear(); | |
| signal_init.clear(); | |
| pi_map.clear(); | |
| po_map.clear(); | |
| #ifdef ABCEXTERNAL | |
| std::string exe_file = ABCEXTERNAL; | |
| #else | |
| std::string exe_file = proc_self_dirname() + "yosys-abc"; | |
| #endif | |
| std::string script_file, liberty_file, constr_file, clk_str; | |
| std::string delay_target, sop_inputs, sop_products, lutin_shared = "-S 1"; | |
| bool fast_mode = false, dff_mode = false, keepff = false, cleanup = true; | |
| bool show_tempdir = false, sop_mode = false; | |
| bool abc_dress = false; | |
| vector<int> lut_costs; | |
| markgroups = false; | |
| map_mux4 = false; | |
| map_mux8 = false; | |
| map_mux16 = false; | |
| enabled_gates.clear(); | |
| cmos_cost = false; | |
| #ifdef _WIN32 | |
| #ifndef ABCEXTERNAL | |
| if (!check_file_exists(exe_file + ".exe") && check_file_exists(proc_self_dirname() + "..\\yosys-abc.exe")) | |
| exe_file = proc_self_dirname() + "..\\yosys-abc"; | |
| #endif | |
| #endif | |
| size_t argidx; | |
| char pwd [PATH_MAX]; | |
| if (!getcwd(pwd, sizeof(pwd))) { | |
| log_cmd_error("getcwd failed: %s\n", strerror(errno)); | |
| log_abort(); | |
| } | |
| for (argidx = 1; argidx < args.size(); argidx++) { | |
| std::string arg = args[argidx]; | |
| if (arg == "-exe" && argidx+1 < args.size()) { | |
| exe_file = args[++argidx]; | |
| continue; | |
| } | |
| if (arg == "-script" && argidx+1 < args.size()) { | |
| script_file = args[++argidx]; | |
| rewrite_filename(script_file); | |
| if (!script_file.empty() && !is_absolute_path(script_file) && script_file[0] != '+') | |
| script_file = std::string(pwd) + "/" + script_file; | |
| continue; | |
| } | |
| if (arg == "-liberty" && argidx+1 < args.size()) { | |
| liberty_file = args[++argidx]; | |
| rewrite_filename(liberty_file); | |
| if (!liberty_file.empty() && !is_absolute_path(liberty_file)) | |
| liberty_file = std::string(pwd) + "/" + liberty_file; | |
| continue; | |
| } | |
| if (arg == "-constr" && argidx+1 < args.size()) { | |
| rewrite_filename(constr_file); | |
| constr_file = args[++argidx]; | |
| if (!constr_file.empty() && !is_absolute_path(constr_file)) | |
| constr_file = std::string(pwd) + "/" + constr_file; | |
| continue; | |
| } | |
| if (arg == "-D" && argidx+1 < args.size()) { | |
| delay_target = "-D " + args[++argidx]; | |
| continue; | |
| } | |
| if (arg == "-I" && argidx+1 < args.size()) { | |
| sop_inputs = "-I " + args[++argidx]; | |
| continue; | |
| } | |
| if (arg == "-P" && argidx+1 < args.size()) { | |
| sop_products = "-P " + args[++argidx]; | |
| continue; | |
| } | |
| if (arg == "-S" && argidx+1 < args.size()) { | |
| lutin_shared = "-S " + args[++argidx]; | |
| continue; | |
| } | |
| if (arg == "-lut" && argidx+1 < args.size()) { | |
| string arg = args[++argidx]; | |
| size_t pos = arg.find_first_of(':'); | |
| int lut_mode = 0, lut_mode2 = 0; | |
| if (pos != string::npos) { | |
| lut_mode = atoi(arg.substr(0, pos).c_str()); | |
| lut_mode2 = atoi(arg.substr(pos+1).c_str()); | |
| } else { | |
| lut_mode = atoi(arg.c_str()); | |
| lut_mode2 = lut_mode; | |
| } | |
| lut_costs.clear(); | |
| for (int i = 0; i < lut_mode; i++) | |
| lut_costs.push_back(1); | |
| for (int i = lut_mode; i < lut_mode2; i++) | |
| lut_costs.push_back(2 << (i - lut_mode)); | |
| continue; | |
| } | |
| if (arg == "-luts" && argidx+1 < args.size()) { | |
| lut_costs.clear(); | |
| for (auto &tok : split_tokens(args[++argidx], ",")) { | |
| auto parts = split_tokens(tok, ":"); | |
| if (GetSize(parts) == 0 && !lut_costs.empty()) | |
| lut_costs.push_back(lut_costs.back()); | |
| else if (GetSize(parts) == 1) | |
| lut_costs.push_back(atoi(parts.at(0).c_str())); | |
| else if (GetSize(parts) == 2) | |
| while (GetSize(lut_costs) < std::atoi(parts.at(0).c_str())) | |
| lut_costs.push_back(atoi(parts.at(1).c_str())); | |
| else | |
| log_cmd_error("Invalid -luts syntax.\n"); | |
| } | |
| continue; | |
| } | |
| if (arg == "-sop") { | |
| sop_mode = true; | |
| continue; | |
| } | |
| if (arg == "-mux4") { | |
| map_mux4 = true; | |
| continue; | |
| } | |
| if (arg == "-mux8") { | |
| map_mux8 = true; | |
| continue; | |
| } | |
| if (arg == "-mux16") { | |
| map_mux16 = true; | |
| continue; | |
| } | |
| if (arg == "-dress") { | |
| abc_dress = true; | |
| continue; | |
| } | |
| if (arg == "-g" && argidx+1 < args.size()) { | |
| for (auto g : split_tokens(args[++argidx], ",")) { | |
| vector<string> gate_list; | |
| bool remove_gates = false; | |
| if (GetSize(g) > 0 && g[0] == '-') { | |
| remove_gates = true; | |
| g = g.substr(1); | |
| } | |
| if (g == "AND") goto ok_gate; | |
| if (g == "NAND") goto ok_gate; | |
| if (g == "OR") goto ok_gate; | |
| if (g == "NOR") goto ok_gate; | |
| if (g == "XOR") goto ok_gate; | |
| if (g == "XNOR") goto ok_gate; | |
| if (g == "ANDNOT") goto ok_gate; | |
| if (g == "ORNOT") goto ok_gate; | |
| if (g == "MUX") goto ok_gate; | |
| if (g == "NMUX") goto ok_gate; | |
| if (g == "AOI3") goto ok_gate; | |
| if (g == "OAI3") goto ok_gate; | |
| if (g == "AOI4") goto ok_gate; | |
| if (g == "OAI4") goto ok_gate; | |
| if (g == "simple") { | |
| gate_list.push_back("AND"); | |
| gate_list.push_back("OR"); | |
| gate_list.push_back("XOR"); | |
| gate_list.push_back("MUX"); | |
| goto ok_alias; | |
| } | |
| if (g == "cmos2") { | |
| if (!remove_gates) | |
| cmos_cost = true; | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("NOR"); | |
| goto ok_alias; | |
| } | |
| if (g == "cmos3") { | |
| if (!remove_gates) | |
| cmos_cost = true; | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("NOR"); | |
| gate_list.push_back("AOI3"); | |
| gate_list.push_back("OAI3"); | |
| goto ok_alias; | |
| } | |
| if (g == "cmos4") { | |
| if (!remove_gates) | |
| cmos_cost = true; | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("NOR"); | |
| gate_list.push_back("AOI3"); | |
| gate_list.push_back("OAI3"); | |
| gate_list.push_back("AOI4"); | |
| gate_list.push_back("OAI4"); | |
| goto ok_alias; | |
| } | |
| if (g == "cmos") { | |
| if (!remove_gates) | |
| cmos_cost = true; | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("NOR"); | |
| gate_list.push_back("AOI3"); | |
| gate_list.push_back("OAI3"); | |
| gate_list.push_back("AOI4"); | |
| gate_list.push_back("OAI4"); | |
| gate_list.push_back("NMUX"); | |
| gate_list.push_back("MUX"); | |
| gate_list.push_back("XOR"); | |
| gate_list.push_back("XNOR"); | |
| goto ok_alias; | |
| } | |
| if (g == "gates") { | |
| gate_list.push_back("AND"); | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("OR"); | |
| gate_list.push_back("NOR"); | |
| gate_list.push_back("XOR"); | |
| gate_list.push_back("XNOR"); | |
| gate_list.push_back("ANDNOT"); | |
| gate_list.push_back("ORNOT"); | |
| goto ok_alias; | |
| } | |
| if (g == "aig") { | |
| gate_list.push_back("AND"); | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("OR"); | |
| gate_list.push_back("NOR"); | |
| gate_list.push_back("ANDNOT"); | |
| gate_list.push_back("ORNOT"); | |
| goto ok_alias; | |
| } | |
| if (g == "all") { | |
| gate_list.push_back("AND"); | |
| gate_list.push_back("NAND"); | |
| gate_list.push_back("OR"); | |
| gate_list.push_back("NOR"); | |
| gate_list.push_back("XOR"); | |
| gate_list.push_back("XNOR"); | |
| gate_list.push_back("ANDNOT"); | |
| gate_list.push_back("ORNOT"); | |
| gate_list.push_back("AOI3"); | |
| gate_list.push_back("OAI3"); | |
| gate_list.push_back("AOI4"); | |
| gate_list.push_back("OAI4"); | |
| gate_list.push_back("MUX"); | |
| gate_list.push_back("NMUX"); | |
| } | |
| cmd_error(args, argidx, stringf("Unsupported gate type: %s", g.c_str())); | |
| ok_gate: | |
| gate_list.push_back(g); | |
| ok_alias: | |
| for (auto gate : gate_list) { | |
| if (remove_gates) | |
| enabled_gates.erase(gate); | |
| else | |
| enabled_gates.insert(gate); | |
| } | |
| } | |
| continue; | |
| } | |
| if (arg == "-fast") { | |
| fast_mode = true; | |
| continue; | |
| } | |
| if (arg == "-dff") { | |
| dff_mode = true; | |
| continue; | |
| } | |
| if (arg == "-clk" && argidx+1 < args.size()) { | |
| clk_str = args[++argidx]; | |
| dff_mode = true; | |
| continue; | |
| } | |
| if (arg == "-keepff") { | |
| keepff = true; | |
| continue; | |
| } | |
| if (arg == "-nocleanup") { | |
| cleanup = false; | |
| continue; | |
| } | |
| if (arg == "-showtmp") { | |
| show_tempdir = true; | |
| continue; | |
| } | |
| if (arg == "-markgroups") { | |
| markgroups = true; | |
| continue; | |
| } | |
| break; | |
| } | |
| extra_args(args, argidx, design); | |
| if (!lut_costs.empty() && !liberty_file.empty()) | |
| log_cmd_error("Got -lut and -liberty! This two options are exclusive.\n"); | |
| if (!constr_file.empty() && liberty_file.empty()) | |
| log_cmd_error("Got -constr but no -liberty!\n"); | |
| if (enabled_gates.empty()) { | |
| enabled_gates.insert("AND"); | |
| enabled_gates.insert("NAND"); | |
| enabled_gates.insert("OR"); | |
| enabled_gates.insert("NOR"); | |
| enabled_gates.insert("XOR"); | |
| enabled_gates.insert("XNOR"); | |
| enabled_gates.insert("ANDNOT"); | |
| enabled_gates.insert("ORNOT"); | |
| // enabled_gates.insert("AOI3"); | |
| // enabled_gates.insert("OAI3"); | |
| // enabled_gates.insert("AOI4"); | |
| // enabled_gates.insert("OAI4"); | |
| enabled_gates.insert("MUX"); | |
| // enabled_gates.insert("NMUX"); | |
| } | |
| for (auto mod : design->selected_modules()) | |
| { | |
| if (mod->processes.size() > 0) { | |
| log("Skipping module %s as it contains processes.\n", log_id(mod)); | |
| continue; | |
| } | |
| assign_map.set(mod); | |
| signal_init.clear(); | |
| for (Wire *wire : mod->wires()) | |
| if (wire->attributes.count(ID(init))) { | |
| SigSpec initsig = assign_map(wire); | |
| Const initval = wire->attributes.at(ID(init)); | |
| for (int i = 0; i < GetSize(initsig) && i < GetSize(initval); i++) | |
| switch (initval[i]) { | |
| case State::S0: | |
| signal_init[initsig[i]] = State::S0; | |
| break; | |
| case State::S1: | |
| signal_init[initsig[i]] = State::S1; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| if (!dff_mode || !clk_str.empty()) { | |
| abc_module(design, mod, script_file, exe_file, liberty_file, constr_file, cleanup, lut_costs, dff_mode, clk_str, keepff, | |
| delay_target, sop_inputs, sop_products, lutin_shared, fast_mode, mod->selected_cells(), show_tempdir, sop_mode, abc_dress); | |
| continue; | |
| } | |
| CellTypes ct(design); | |
| std::vector<RTLIL::Cell*> all_cells = mod->selected_cells(); | |
| std::set<RTLIL::Cell*> unassigned_cells(all_cells.begin(), all_cells.end()); | |
| std::set<RTLIL::Cell*> expand_queue, next_expand_queue; | |
| std::set<RTLIL::Cell*> expand_queue_up, next_expand_queue_up; | |
| std::set<RTLIL::Cell*> expand_queue_down, next_expand_queue_down; | |
| typedef tuple<bool, RTLIL::SigSpec, bool, RTLIL::SigSpec> clkdomain_t; | |
| std::map<clkdomain_t, std::vector<RTLIL::Cell*>> assigned_cells; | |
| std::map<RTLIL::Cell*, clkdomain_t> assigned_cells_reverse; | |
| std::map<RTLIL::Cell*, std::set<RTLIL::SigBit>> cell_to_bit, cell_to_bit_up, cell_to_bit_down; | |
| std::map<RTLIL::SigBit, std::set<RTLIL::Cell*>> bit_to_cell, bit_to_cell_up, bit_to_cell_down; | |
| for (auto cell : all_cells) | |
| { | |
| clkdomain_t key; | |
| for (auto &conn : cell->connections()) | |
| for (auto bit : conn.second) { | |
| bit = assign_map(bit); | |
| if (bit.wire != nullptr) { | |
| cell_to_bit[cell].insert(bit); | |
| bit_to_cell[bit].insert(cell); | |
| if (ct.cell_input(cell->type, conn.first)) { | |
| cell_to_bit_up[cell].insert(bit); | |
| bit_to_cell_down[bit].insert(cell); | |
| } | |
| if (ct.cell_output(cell->type, conn.first)) { | |
| cell_to_bit_down[cell].insert(bit); | |
| bit_to_cell_up[bit].insert(cell); | |
| } | |
| } | |
| } | |
| if (cell->type.in(ID($_DFF_N_), ID($_DFF_P_))) | |
| { | |
| key = clkdomain_t(cell->type == ID($_DFF_P_), assign_map(cell->getPort(ID(C))), true, RTLIL::SigSpec()); | |
| } | |
| else | |
| if (cell->type.in(ID($_DFFE_NN_), ID($_DFFE_NP_), ID($_DFFE_PN_), ID($_DFFE_PP_))) | |
| { | |
| bool this_clk_pol = cell->type.in(ID($_DFFE_PN_), ID($_DFFE_PP_)); | |
| bool this_en_pol = cell->type.in(ID($_DFFE_NP_), ID($_DFFE_PP_)); | |
| key = clkdomain_t(this_clk_pol, assign_map(cell->getPort(ID(C))), this_en_pol, assign_map(cell->getPort(ID(E)))); | |
| } | |
| else | |
| continue; | |
| unassigned_cells.erase(cell); | |
| expand_queue.insert(cell); | |
| expand_queue_up.insert(cell); | |
| expand_queue_down.insert(cell); | |
| assigned_cells[key].push_back(cell); | |
| assigned_cells_reverse[cell] = key; | |
| } | |
| while (!expand_queue_up.empty() || !expand_queue_down.empty()) | |
| { | |
| if (!expand_queue_up.empty()) | |
| { | |
| RTLIL::Cell *cell = *expand_queue_up.begin(); | |
| clkdomain_t key = assigned_cells_reverse.at(cell); | |
| expand_queue_up.erase(cell); | |
| for (auto bit : cell_to_bit_up[cell]) | |
| for (auto c : bit_to_cell_up[bit]) | |
| if (unassigned_cells.count(c)) { | |
| unassigned_cells.erase(c); | |
| next_expand_queue_up.insert(c); | |
| assigned_cells[key].push_back(c); | |
| assigned_cells_reverse[c] = key; | |
| expand_queue.insert(c); | |
| } | |
| } | |
| if (!expand_queue_down.empty()) | |
| { | |
| RTLIL::Cell *cell = *expand_queue_down.begin(); | |
| clkdomain_t key = assigned_cells_reverse.at(cell); | |
| expand_queue_down.erase(cell); | |
| for (auto bit : cell_to_bit_down[cell]) | |
| for (auto c : bit_to_cell_down[bit]) | |
| if (unassigned_cells.count(c)) { | |
| unassigned_cells.erase(c); | |
| next_expand_queue_up.insert(c); | |
| assigned_cells[key].push_back(c); | |
| assigned_cells_reverse[c] = key; | |
| expand_queue.insert(c); | |
| } | |
| } | |
| if (expand_queue_up.empty() && expand_queue_down.empty()) { | |
| expand_queue_up.swap(next_expand_queue_up); | |
| expand_queue_down.swap(next_expand_queue_down); | |
| } | |
| } | |
| while (!expand_queue.empty()) | |
| { | |
| RTLIL::Cell *cell = *expand_queue.begin(); | |
| clkdomain_t key = assigned_cells_reverse.at(cell); | |
| expand_queue.erase(cell); | |
| for (auto bit : cell_to_bit.at(cell)) { | |
| for (auto c : bit_to_cell[bit]) | |
| if (unassigned_cells.count(c)) { | |
| unassigned_cells.erase(c); | |
| next_expand_queue.insert(c); | |
| assigned_cells[key].push_back(c); | |
| assigned_cells_reverse[c] = key; | |
| } | |
| bit_to_cell[bit].clear(); | |
| } | |
| if (expand_queue.empty()) | |
| expand_queue.swap(next_expand_queue); | |
| } | |
| clkdomain_t key(true, RTLIL::SigSpec(), true, RTLIL::SigSpec()); | |
| for (auto cell : unassigned_cells) { | |
| assigned_cells[key].push_back(cell); | |
| assigned_cells_reverse[cell] = key; | |
| } | |
| log_header(design, "Summary of detected clock domains:\n"); | |
| for (auto &it : assigned_cells) | |
| log(" %d cells in clk=%s%s, en=%s%s\n", GetSize(it.second), | |
| std::get<0>(it.first) ? "" : "!", log_signal(std::get<1>(it.first)), | |
| std::get<2>(it.first) ? "" : "!", log_signal(std::get<3>(it.first))); | |
| for (auto &it : assigned_cells) { | |
| clk_polarity = std::get<0>(it.first); | |
| clk_sig = assign_map(std::get<1>(it.first)); | |
| en_polarity = std::get<2>(it.first); | |
| en_sig = assign_map(std::get<3>(it.first)); | |
| abc_module(design, mod, script_file, exe_file, liberty_file, constr_file, cleanup, lut_costs, !clk_sig.empty(), "$", | |
| keepff, delay_target, sop_inputs, sop_products, lutin_shared, fast_mode, it.second, show_tempdir, sop_mode, abc_dress); | |
| assign_map.set(mod); | |
| } | |
| } | |
| assign_map.clear(); | |
| signal_list.clear(); | |
| signal_map.clear(); | |
| signal_init.clear(); | |
| pi_map.clear(); | |
| po_map.clear(); | |
| log_pop(); | |
| } | |
| } AbcPass; | |
| PRIVATE_NAMESPACE_END |