passes/techmap/flowmap.cc

/*
 *  yosys -- Yosys Open SYnthesis Suite
 *
 *  Copyright (C) 2018  whitequark <whitequark@whitequark.org>
 *
 *  Permission to use, copy, modify, and/or distribute this software for any
 *  purpose with or without fee is hereby granted, provided that the above
 *  copyright notice and this permission notice appear in all copies.
 *
 *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

// [[CITE]] FlowMap algorithm
// Jason Cong; Yuzheng Ding, "An Optimal Technology Mapping Algorithm for Delay Optimization in Lookup-Table Based FPGA Designs,"
// Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on, Vol. 13, pp. 1-12, Jan. 1994.
// doi: 10.1109/43.273754

// [[CITE]] FlowMap-r algorithm
// Jason Cong; Yuzheng Ding, "On Area/Depth Tradeoff in LUT-Based FPGA Technology Mapping,"
// Very Large Scale Integration Systems, IEEE Transactions on, Vol. 2, June 1994.
// doi: 10.1109/92.28574

// Required reading material:
//
// Min-cut max-flow theorem:
//   https://www.coursera.org/lecture/algorithms-part2/maxflow-mincut-theorem-beb9G
// FlowMap paper:
//   http://cadlab.cs.ucla.edu/~cong/papers/iccad92.pdf   (short version)
//   https://limsk.ece.gatech.edu/book/papers/flowmap.pdf (long version)
// FlowMap-r paper:
//   http://cadlab.cs.ucla.edu/~cong/papers/dac93.pdf     (short version)
//   https://sci-hub.tw/10.1109/92.285741                 (long version)

// Notes on correspondence between paper and implementation:
//
// 1. In the FlowMap paper, the nodes are logic elements (analogous to Yosys cells) and edges are wires. However, in our implementation,
// we use an inverted approach: the nodes are Yosys wire bits, and the edges are derived from (but aren't represented by) Yosys cells.
// This may seem counterintuitive. Three observations may help understanding this. First, for a cell with a 1-bit Y output that is
// the sole driver of its output net (which is the typical case), these representations are equivalent, because there is an exact
// correspondence between cells and output wires. Second, in the paper, primary inputs (analogous to Yosys cell or module ports) are
// nodes, and in Yosys, inputs are wires; our approach allows a direct mapping from both primary inputs and 1-output logic elements to
// flow graph nodes. Third, Yosys cells may have multiple outputs or multi-bit outputs, and by using Yosys wire bits as flow graph nodes,
// such cells are supported without any additional effort; any Yosys cell with n output wire bits ends up being split into n flow graph
// nodes.
//
// 2. The FlowMap paper introduces three networks: Nt, Nt', and Nt''. The network Nt is directly represented by a subgraph of RTLIL graph,
// which is parsed into an equivalent but easier to traverse representation in FlowmapWorker. The network Nt' is built explicitly
// from a subgraph of Nt, and uses a similar representation in FlowGraph. The network Nt'' is implicit in FlowGraph, which is possible
// because of the following observation: each Nt' node corresponds to an Nt'' edge of capacity 1, and each Nt' edge corresponds to
// an Nt'' edge of capacity ∞. Therefore, we only need to explicitly record flow for Nt' edges and through Nt' nodes.
//
// 3. The FlowMap paper ambiguously states: "Moreover, we can find such a cut (X′′, X̅′′) by performing a depth first search starting at
// the source s, and including in X′′ all the nodes which are reachable from s." This actually refers to a specific kind of search,
// min-cut computation. Min-cut computation involves computing the set of nodes reachable from s by an undirected path with no full
// (i.e. zero capacity) forward edges or empty (i.e. no flow) backward edges. In addition, the depth first search is required to compute
// a max-volume max-flow min-cut specifically, because a max-flow min-cut is not, in general, unique.

// Notes on implementation:
//
// 1. To compute depth optimal packing, an intermediate representation is used, where each cell with n output bits is split into n graph
// nodes. Each such graph node is represented directly with the wire bit (RTLIL::SigBit instance) that corresponds to the output bit
// it is created from. Fan-in and fan-out are represented explicitly by edge lists derived from the RTLIL graph. This IR never changes
// after it has been computed.
//
// In terms of data, this IR is comprised of `inputs`, `outputs`, `nodes`, `edges_fw` and `edges_bw` fields.
//
// We call this IR "gate IR".
//
// 2. To compute area optimal packing, another intermediate representation is used, which consists of some K-feasible cone for every node
// that exists in the gate IR. Immediately after depth optimal packing with FlowMap, each such cone occupies the lowest possible depth,
// but this is not true in general, and transformations of this IR may change the cones, although each transformation has to keep each
// cone K-feasible. In this IR, LUT fan-in and fan-out are represented explicitly by edge lists; if a K-feasible cone chosen for node A
// includes nodes B and C, there are edges between all predecessors of A, B and C in the gate IR and node A in this IR. Moreover, in
// this IR, cones may be *realized* or *derealized*. Only realized cones will end up mapped to actual LUTs in the output of this pass.
//
// Intuitively, this IR contains (some, ideally but not necessarily optimal) LUT representation for each input cell. By starting at outputs
// and traversing the graph of this IR backwards, each K-feasible cone is converted to an actual LUT at the end of the pass. This is
// the same as iterating through each realized LUT.
//
// The following are the invariants of this IR:
//   a) Each gate IR node corresponds to a K-feasible cut.
//   b) Each realized LUT is reachable through backward edges from some output.
//   c) The LUT fan-in is exactly the fan-in of its constituent gates minus the fan-out of its constituent gates.
// The invariants are kept even for derealized LUTs, since the whole point of this IR is ease of packing, unpacking, and repacking LUTs.
//
// In terms of data, this IR is comprised of `lut_nodes` (the set of all realized LUTs), `lut_gates` (the map from a LUT to its
// constituent gates), `lut_edges_fw` and `lut_edges_bw` fields. The `inputs` and `outputs` fields are shared with the gate IR.
//
// We call this IR "LUT IR".

#include "kernel/yosys.h"
#include "kernel/sigtools.h"
#include "kernel/modtools.h"
#include "kernel/consteval.h"

USING_YOSYS_NAMESPACE
PRIVATE_NAMESPACE_BEGIN

struct GraphStyle
{
	string label;
	string color, fillcolor;

	GraphStyle(string label = "", string color = "black", string fillcolor = "") :
		label(label), color(color), fillcolor(fillcolor) {}
};

static string dot_escape(string value)
{
	std::string escaped;
	for (char c : value) {
		if (c == '\n')
		{
			escaped += "\\n";
			continue;
		}
		if (c == '\\' || c == '"')
			escaped += "\\";
		escaped += c;
	}
	return escaped;
}

static void dump_dot_graph(string filename,
                           pool<RTLIL::SigBit> nodes, dict<RTLIL::SigBit, pool<RTLIL::SigBit>> edges,
                           pool<RTLIL::SigBit> inputs, pool<RTLIL::SigBit> outputs,
                           std::function<GraphStyle(RTLIL::SigBit)> node_style =
                                   [](RTLIL::SigBit) { return GraphStyle{}; },
                           std::function<GraphStyle(RTLIL::SigBit, RTLIL::SigBit)> edge_style =
                                   [](RTLIL::SigBit, RTLIL::SigBit) { return GraphStyle{}; },
                           string name = "")
{
	FILE *f = fopen(filename.c_str(), "w");
	fprintf(f, "digraph \"%s\" {\n", name.c_str());
	fprintf(f, "  rankdir=\"TB\";\n");

	dict<RTLIL::SigBit, int> ids;
	for (auto node : nodes)
	{
		ids[node] = ids.size();

		string shape = "ellipse";
		if (inputs[node])
			shape = "box";
		if (outputs[node])
			shape = "octagon";
		auto prop = node_style(node);
		string style = "";
		if (!prop.fillcolor.empty())
			style = "filled";
		fprintf(f, "  n%d [ shape=%s, fontname=\"Monospace\", label=\"%s\", color=\"%s\", fillcolor=\"%s\", style=\"%s\" ];\n",
		        ids[node], shape.c_str(), dot_escape(prop.label.c_str()).c_str(), prop.color.c_str(), prop.fillcolor.c_str(), style.c_str());
	}

	fprintf(f, "  { rank=\"source\"; ");
	for (auto input : inputs)
		if (nodes[input])
			fprintf(f, "n%d; ", ids[input]);
	fprintf(f, "}\n");

	fprintf(f, "  { rank=\"sink\"; ");
	for (auto output : outputs)
		if (nodes[output])
			fprintf(f, "n%d; ", ids[output]);
	fprintf(f, "}\n");

	for (auto edge : edges)
	{
		auto source = edge.first;
		for (auto sink : edge.second) {
			if (nodes[source] && nodes[sink])
			{
				auto prop = edge_style(source, sink);
				fprintf(f, "  n%d -> n%d [ label=\"%s\", color=\"%s\", fillcolor=\"%s\" ];\n",
				        ids[source], ids[sink], dot_escape(prop.label.c_str()).c_str(), prop.color.c_str(), prop.fillcolor.c_str());
			}
		}
	}

	fprintf(f, "}\n");
	fclose(f);
}

struct FlowGraph
{
	const RTLIL::SigBit source;
	RTLIL::SigBit sink;
	pool<RTLIL::SigBit> nodes = {source};
	dict<RTLIL::SigBit, pool<RTLIL::SigBit>> edges_fw, edges_bw;

	const int MAX_NODE_FLOW = 1;
	dict<RTLIL::SigBit, int> node_flow;
	dict<pair<RTLIL::SigBit, RTLIL::SigBit>, int> edge_flow;

	dict<RTLIL::SigBit, pool<RTLIL::SigBit>> collapsed;

	void dump_dot_graph(string filename)
	{
		auto node_style = [&](RTLIL::SigBit node) {
			string label = (node == source) ? "(source)" : log_signal(node);
			for (auto collapsed_node : collapsed[node])
				label += stringf(" %s", log_signal(collapsed_node));
			int flow = node_flow[node];
			if (node != source && node != sink)
				label += stringf("\n%d/%d", flow, MAX_NODE_FLOW);
			else
				label += stringf("\n%d/∞", flow);
			return GraphStyle{label, flow < MAX_NODE_FLOW ? "green" : "black"};
		};
		auto edge_style = [&](RTLIL::SigBit source, RTLIL::SigBit sink) {
			int flow = edge_flow[{source, sink}];
			return GraphStyle{stringf("%d/∞", flow), flow > 0 ? "blue" : "black"};
		};
		::dump_dot_graph(filename, nodes, edges_fw, {source}, {sink}, node_style, edge_style);
	}

	// Here, we are working on the Nt'' network, but our representation is the Nt' network.
	// The difference between these is that where in Nt' we have a subgraph:
	//
	//   v1 -> v2 -> v3
	//
	// in Nt'' we have a corresponding subgraph:
	//
	//   v'1b -∞-> v'2t -f-> v'2b -∞-> v'3t
	//
	// To address this, we split each node v into two nodes, v't and v'b. This representation is virtual,
	// in the sense that nodes v't and v'b are overlaid on top of the original node v, and only exist
	// in paths and worklists.

	struct NodePrime
	{
		RTLIL::SigBit node;
		bool is_bottom;

		NodePrime(RTLIL::SigBit node, bool is_bottom) :
			node(node), is_bottom(is_bottom) {}

		bool operator==(const NodePrime &other) const
		{
			return node == other.node && is_bottom == other.is_bottom;
		}
		bool operator!=(const NodePrime &other) const
		{
			return !(*this == other);
		}
		unsigned int hash() const
		{
			return hash_ops<pair<RTLIL::SigBit, int>>::hash({node, is_bottom});
		}

		static NodePrime top(RTLIL::SigBit node)
		{
			return NodePrime(node, /*is_bottom=*/false);
		}

		static NodePrime bottom(RTLIL::SigBit node)
		{
			return NodePrime(node, /*is_bottom=*/true);
		}

		NodePrime as_top() const
		{
			log_assert(is_bottom);
			return top(node);
		}

		NodePrime as_bottom() const
		{
			log_assert(!is_bottom);
			return bottom(node);
		}
	};

	bool find_augmenting_path(bool commit)
	{
		NodePrime source_prime = {source, true};
		NodePrime sink_prime = {sink, false};
		vector<NodePrime> path = {source_prime};
		pool<NodePrime> visited = {};
		bool found;
		do {
			found = false;

			auto node_prime = path.back();
			visited.insert(node_prime);

			if (!node_prime.is_bottom) // vt
			{
				if (!visited[node_prime.as_bottom()] && node_flow[node_prime.node] < MAX_NODE_FLOW)
				{
					path.push_back(node_prime.as_bottom());
					found = true;
				}
				else
				{
					for (auto node_pred : edges_bw[node_prime.node])
					{
						if (!visited[NodePrime::bottom(node_pred)] && edge_flow[{node_pred, node_prime.node}] > 0)
						{
							path.push_back(NodePrime::bottom(node_pred));
							found = true;
							break;
						}
					}
				}
			}
			else // vb
			{
				if (!visited[node_prime.as_top()] && node_flow[node_prime.node] > 0)
				{
					path.push_back(node_prime.as_top());
					found = true;
				}
				else
				{
					for (auto node_succ : edges_fw[node_prime.node])
					{
						if (!visited[NodePrime::top(node_succ)] /* && edge_flow[...] < ∞ */)
						{
							path.push_back(NodePrime::top(node_succ));
							found = true;
							break;
						}
					}
				}
			}

			if (!found && path.size() > 1)
			{
				path.pop_back();
				found = true;
			}
		} while(path.back() != sink_prime && found);

		if (commit && path.back() == sink_prime)
		{
			auto prev_prime = path.front();
			for (auto node_prime : path)
			{
				if (node_prime == source_prime)
					continue;

				log_assert(prev_prime.is_bottom ^ node_prime.is_bottom);
				if (prev_prime.node == node_prime.node)
				{
					auto node = node_prime.node;
					if (!prev_prime.is_bottom && node_prime.is_bottom)
					{
						log_assert(node_flow[node] == 0);
						node_flow[node]++;
					}
					else
					{
						log_assert(node_flow[node] != 0);
						node_flow[node]--;
					}
				}
				else
				{
					if (prev_prime.is_bottom && !node_prime.is_bottom)
					{
						log_assert(true /* edge_flow[...] < ∞ */);
						edge_flow[{prev_prime.node, node_prime.node}]++;
					}
					else
					{
						log_assert((edge_flow[{node_prime.node, prev_prime.node}] > 0));
						edge_flow[{node_prime.node, prev_prime.node}]--;
					}
				}
				prev_prime = node_prime;
			}

			node_flow[source]++;
			node_flow[sink]++;
		}
		return path.back() == sink_prime;
	}

	int maximum_flow(int order)
	{
		int flow = 0;
		while (flow < order && find_augmenting_path(/*commit=*/true))
			flow++;
		return flow + find_augmenting_path(/*commit=*/false);
	}

	pair<pool<RTLIL::SigBit>, pool<RTLIL::SigBit>> edge_cut()
	{
		pool<RTLIL::SigBit> x, xi;

		NodePrime source_prime = {source, true};
		pool<NodePrime> visited;
		vector<NodePrime> worklist = {source_prime};
		while (!worklist.empty())
		{
			auto node_prime = worklist.back();
			worklist.pop_back();
			if (visited[node_prime])
				continue;
			visited.insert(node_prime);

			if (!node_prime.is_bottom)
				x.insert(node_prime.node);

			// Mincut is constructed by traversing a graph in an undirected way along forward edges that aren't full, or backward edges
			// that aren't empty.
			if (!node_prime.is_bottom) // top
			{
				if (node_flow[node_prime.node] < MAX_NODE_FLOW)
					worklist.push_back(node_prime.as_bottom());
				for (auto node_pred : edges_bw[node_prime.node])
					if (edge_flow[{node_pred, node_prime.node}] > 0)
						worklist.push_back(NodePrime::bottom(node_pred));
			}
			else // bottom
			{
				if (node_flow[node_prime.node] > 0)
					worklist.push_back(node_prime.as_top());
				for (auto node_succ : edges_fw[node_prime.node])
					if (true /* edge_flow[...] < ∞ */)
						worklist.push_back(NodePrime::top(node_succ));
			}
		}

		for (auto node : nodes)
			if (!x[node])
				xi.insert(node);

		for (auto collapsed_node : collapsed[sink])
			xi.insert(collapsed_node);

		log_assert(!x[sink] && xi[sink]);
		return {x, xi};
	}
};

struct FlowmapWorker
{
	int order;
	int r_alpha, r_beta, r_gamma;
	bool debug, debug_relax;

	RTLIL::Module *module;
	SigMap sigmap;
	ModIndex index;

	dict<RTLIL::SigBit, ModIndex::PortInfo> node_origins;

	// Gate IR
	pool<RTLIL::SigBit> nodes, inputs, outputs;
	dict<RTLIL::SigBit, pool<RTLIL::SigBit>> edges_fw, edges_bw;
	dict<RTLIL::SigBit, int> labels;

	// LUT IR
	pool<RTLIL::SigBit> lut_nodes;
	dict<RTLIL::SigBit, pool<RTLIL::SigBit>> lut_gates;
	dict<RTLIL::SigBit, pool<RTLIL::SigBit>> lut_edges_fw, lut_edges_bw;
	dict<RTLIL::SigBit, int> lut_depths, lut_altitudes, lut_slacks;

	int gate_count = 0, lut_count = 0, packed_count = 0;
	int gate_area = 0, lut_area = 0;

	enum class GraphMode {
		Label,
		Cut,
		Slack,
	};

	void dump_dot_graph(string filename, GraphMode mode,
	                    pool<RTLIL::SigBit> subgraph_nodes = {}, dict<RTLIL::SigBit, pool<RTLIL::SigBit>> subgraph_edges = {},
	                    dict<RTLIL::SigBit, pool<RTLIL::SigBit>> collapsed = {},
	                    pair<pool<RTLIL::SigBit>, pool<RTLIL::SigBit>> cut = {})
	{
		if (subgraph_nodes.empty())
			subgraph_nodes = nodes;
		if (subgraph_edges.empty())
			subgraph_edges = edges_fw;

		auto node_style = [&](RTLIL::SigBit node) {
			string label = log_signal(node);
			for (auto collapsed_node : collapsed[node])
				if (collapsed_node != node)
					label += stringf(" %s", log_signal(collapsed_node));
			switch (mode)
			{
				case GraphMode::Label:
					if (labels[node] == -1)
					{
						label += "\nl=?";
						return GraphStyle{label};
					}
					else
					{
						label += stringf("\nl=%d", labels[node]);
						string fillcolor = stringf("/set311/%d", 1 + labels[node] % 11);
						return GraphStyle{label, "", fillcolor};
					}

				case GraphMode::Cut:
					if (cut.first[node])
						return GraphStyle{label, "blue"};
					if (cut.second[node])
						return GraphStyle{label, "red"};
					return GraphStyle{label};

				case GraphMode::Slack:
					label += stringf("\nd=%d a=%d\ns=%d", lut_depths[node], lut_altitudes[node], lut_slacks[node]);
					return GraphStyle{label, lut_slacks[node] == 0 ? "red" : "black"};
			}
			return GraphStyle{label};
		};
		auto edge_style = [&](RTLIL::SigBit, RTLIL::SigBit) {
			return GraphStyle{};
		};
		::dump_dot_graph(filename, subgraph_nodes, subgraph_edges, inputs, outputs, node_style, edge_style, module->name.str());
	}

	void dump_dot_lut_graph(string filename, GraphMode mode)
	{
		pool<RTLIL::SigBit> lut_and_input_nodes;
		lut_and_input_nodes.insert(lut_nodes.begin(), lut_nodes.end());
		lut_and_input_nodes.insert(inputs.begin(), inputs.end());
		dump_dot_graph(filename, mode, lut_and_input_nodes, lut_edges_fw, lut_gates);
	}

	pool<RTLIL::SigBit> find_subgraph(RTLIL::SigBit sink)
	{
		pool<RTLIL::SigBit> subgraph;
		pool<RTLIL::SigBit> worklist = {sink};
		while (!worklist.empty())
		{
			auto node = worklist.pop();
			subgraph.insert(node);
			for (auto source : edges_bw[node])
			{
				if (!subgraph[source])
					worklist.insert(source);
			}
		}
		return subgraph;
	}

	FlowGraph build_flow_graph(RTLIL::SigBit sink, int p)
	{
		FlowGraph flow_graph;
		flow_graph.sink = sink;

		pool<RTLIL::SigBit> worklist = {sink}, visited;
		while (!worklist.empty())
		{
			auto node = worklist.pop();
			visited.insert(node);

			auto collapsed_node = labels[node] == p ? sink : node;
			if (node != collapsed_node)
				flow_graph.collapsed[collapsed_node].insert(node);
			flow_graph.nodes.insert(collapsed_node);

			for (auto node_pred : edges_bw[node])
			{
				auto collapsed_node_pred = labels[node_pred] == p ? sink : node_pred;
				if (node_pred != collapsed_node_pred)
					flow_graph.collapsed[collapsed_node_pred].insert(node_pred);
				if (collapsed_node != collapsed_node_pred)
				{
					flow_graph.edges_bw[collapsed_node].insert(collapsed_node_pred);
					flow_graph.edges_fw[collapsed_node_pred].insert(collapsed_node);
				}
				if (inputs[node_pred])
				{
					flow_graph.edges_bw[collapsed_node_pred].insert(flow_graph.source);
					flow_graph.edges_fw[flow_graph.source].insert(collapsed_node_pred);
				}

				if (!visited[node_pred])
					worklist.insert(node_pred);
			}
		}
		return flow_graph;
	}

	void discover_nodes(pool<IdString> cell_types)
	{
		for (auto cell : module->selected_cells())
		{
			if (!cell_types[cell->type])
				continue;

			if (!cell->known())
				log_error("Cell %s (%s.%s) is unknown.\n", cell->type.c_str(), log_id(module), log_id(cell));

			pool<RTLIL::SigBit> fanout;
			for (auto conn : cell->connections())
			{
				if (!cell->output(conn.first)) continue;
				int offset = -1;
				for (auto bit : conn.second)
				{
					offset++;
					if (!bit.wire) continue;
					auto mapped_bit = sigmap(bit);
					if (nodes[mapped_bit])
						log_error("Multiple drivers found for wire %s.\n", log_signal(mapped_bit));
					nodes.insert(mapped_bit);
					node_origins[mapped_bit] = ModIndex::PortInfo(cell, conn.first, offset);
					fanout.insert(mapped_bit);
				}
			}

			int fanin = 0;
			for (auto conn : cell->connections())
			{
				if (!cell->input(conn.first)) continue;
				for (auto bit : sigmap(conn.second))
				{
					if (!bit.wire) continue;
					for (auto fanout_bit : fanout)
					{
						edges_fw[bit].insert(fanout_bit);
						edges_bw[fanout_bit].insert(bit);
					}
					fanin++;
				}
			}

			if (fanin > order)
				log_error("Cell %s (%s.%s) with fan-in %d cannot be mapped to a %d-LUT.\n",
				          cell->type.c_str(), log_id(module), log_id(cell), fanin, order);

			gate_count++;
			gate_area += 1 << fanin;
		}

		for (auto edge : edges_fw)
		{
			if (!nodes[edge.first])
			{
				inputs.insert(edge.first);
				nodes.insert(edge.first);
			}
		}

		for (auto node : nodes)
		{
			auto node_info = index.query(node);
			if (node_info->is_output && !inputs[node])
				outputs.insert(node);
			for (auto port : node_info->ports)
				if (!cell_types[port.cell->type] && !inputs[node])
					outputs.insert(node);
		}

		if (debug)
		{
			dump_dot_graph("flowmap-initial.dot", GraphMode::Label);
			log("Dumped initial graph to `flowmap-initial.dot`.\n");
		}
	}

	void label_nodes()
	{
		for (auto node : nodes)
			labels[node] = -1;
		for (auto input : inputs)
		{
			if (input.wire->attributes.count(ID($flowmap_level)))
				labels[input] = input.wire->attributes[ID($flowmap_level)].as_int();
			else
				labels[input] = 0;
		}

		pool<RTLIL::SigBit> worklist = nodes;
		int debug_num = 0;
		while (!worklist.empty())
		{
			auto sink = worklist.pop();
			if (labels[sink] != -1)
				continue;

			bool inputs_have_labels = true;
			for (auto sink_input : edges_bw[sink])
			{
				if (labels[sink_input] == -1)
				{
					inputs_have_labels = false;
					break;
				}
			}
			if (!inputs_have_labels)
				continue;

			if (debug)
			{
				debug_num++;
				log("Examining subgraph %d rooted in %s.\n", debug_num, log_signal(sink));
			}

			pool<RTLIL::SigBit> subgraph = find_subgraph(sink);

			int p = 1;
			for (auto subgraph_node : subgraph)
				p = max(p, labels[subgraph_node]);

			FlowGraph flow_graph = build_flow_graph(sink, p);
			int flow = flow_graph.maximum_flow(order);
			pool<RTLIL::SigBit> x, xi;
			if (flow <= order)
			{
				labels[sink] = p;
				auto cut = flow_graph.edge_cut();
				x = cut.first;
				xi = cut.second;
			}
			else
			{
				labels[sink] = p + 1;
				x = subgraph;
				x.erase(sink);
				xi.insert(sink);
			}
			lut_gates[sink] = xi;

			pool<RTLIL::SigBit> k;
			for (auto xi_node : xi)
			{
				for (auto xi_node_pred : edges_bw[xi_node])
					if (x[xi_node_pred])
						k.insert(xi_node_pred);
			}
			log_assert((int)k.size() <= order);
			lut_edges_bw[sink] = k;
			for (auto k_node : k)
				lut_edges_fw[k_node].insert(sink);

			if (debug)
			{
				log("  Maximum flow: %d. Assigned label %d.\n", flow, labels[sink]);
				dump_dot_graph(stringf("flowmap-%d-sub.dot", debug_num), GraphMode::Cut, subgraph, {}, {}, {x, xi});
				log("  Dumped subgraph to `flowmap-%d-sub.dot`.\n", debug_num);
				flow_graph.dump_dot_graph(stringf("flowmap-%d-flow.dot", debug_num));
				log("  Dumped flow graph to `flowmap-%d-flow.dot`.\n", debug_num);
				log("    LUT inputs:");
				for (auto k_node : k)
					log(" %s", log_signal(k_node));
				log(".\n");
				log("    LUT packed gates:");
				for (auto xi_node : xi)
					log(" %s", log_signal(xi_node));
				log(".\n");
			}

			for (auto sink_succ : edges_fw[sink])
				worklist.insert(sink_succ);
		}

		if (debug)
		{
			dump_dot_graph("flowmap-labeled.dot", GraphMode::Label);
			log("Dumped labeled graph to `flowmap-labeled.dot`.\n");
		}
	}

	int map_luts()
	{
		pool<RTLIL::SigBit> worklist = outputs;
		while (!worklist.empty())
		{
			auto lut_node = worklist.pop();
			lut_nodes.insert(lut_node);
			for (auto input_node : lut_edges_bw[lut_node])
				if (!lut_nodes[input_node] && !inputs[input_node])
					worklist.insert(input_node);
		}

		int depth = 0;
		for (auto label : labels)
			depth = max(depth, label.second);
		log("Mapped to %d LUTs with maximum depth %d.\n", GetSize(lut_nodes), depth);

		if (debug)
		{
			dump_dot_lut_graph("flowmap-mapped.dot", GraphMode::Label);
			log("Dumped mapped graph to `flowmap-mapped.dot`.\n");
		}

		return depth;
	}

	void realize_derealize_lut(RTLIL::SigBit lut, pool<RTLIL::SigBit> *changed = nullptr)
	{
		pool<RTLIL::SigBit> worklist = {lut};
		while (!worklist.empty())
		{
			auto lut = worklist.pop();
			if (inputs[lut])
				continue;

			bool realized_successors = false;
			for (auto lut_succ : lut_edges_fw[lut])
				if (lut_nodes[lut_succ])
					realized_successors = true;

			if (realized_successors && !lut_nodes[lut])
				lut_nodes.insert(lut);
			else if (!realized_successors && lut_nodes[lut])
				lut_nodes.erase(lut);
			else
				continue;

			for (auto lut_pred : lut_edges_bw[lut])
				worklist.insert(lut_pred);

			if (changed)
				changed->insert(lut);
		}
	}

	void add_lut_edge(RTLIL::SigBit pred, RTLIL::SigBit succ, pool<RTLIL::SigBit> *changed = nullptr)
	{
		log_assert(!lut_edges_fw[pred][succ] && !lut_edges_bw[succ][pred]);
		log_assert((int)lut_edges_bw[succ].size() < order);

		lut_edges_fw[pred].insert(succ);
		lut_edges_bw[succ].insert(pred);
		realize_derealize_lut(pred, changed);

		if (changed)
		{
			changed->insert(pred);
			changed->insert(succ);
		}
	}

	void remove_lut_edge(RTLIL::SigBit pred, RTLIL::SigBit succ, pool<RTLIL::SigBit> *changed = nullptr)
	{
		log_assert(lut_edges_fw[pred][succ] && lut_edges_bw[succ][pred]);

		lut_edges_fw[pred].erase(succ);
		lut_edges_bw[succ].erase(pred);
		realize_derealize_lut(pred, changed);

		if (changed)
		{
			if (lut_nodes[pred])
				changed->insert(pred);
			changed->insert(succ);
		}
	}

	pair<pool<RTLIL::SigBit>, pool<RTLIL::SigBit>> cut_lut_at_gate(RTLIL::SigBit lut, RTLIL::SigBit lut_gate)
	{
		pool<RTLIL::SigBit> gate_inputs = lut_edges_bw[lut];
		pool<RTLIL::SigBit> other_inputs;
		pool<RTLIL::SigBit> worklist = {lut};
		while (!worklist.empty())
		{
			auto node = worklist.pop();
			for (auto node_pred : edges_bw[node])
			{
				if (node_pred == lut_gate)
					continue;
				if (lut_gates[lut][node_pred])
					worklist.insert(node_pred);
				else
				{
					gate_inputs.erase(node_pred);
					other_inputs.insert(node_pred);
				}
			}
		}
		return {gate_inputs, other_inputs};
	}

	void compute_lut_distances(dict<RTLIL::SigBit, int> &lut_distances, bool forward,
	                          pool<RTLIL::SigBit> initial = {}, pool<RTLIL::SigBit> *changed = nullptr)
	{
		pool<RTLIL::SigBit> terminals = forward ? inputs : outputs;
		auto &lut_edges_next = forward ? lut_edges_fw : lut_edges_bw;
		auto &lut_edges_prev = forward ? lut_edges_bw : lut_edges_fw;

		if (initial.empty())
			initial = terminals;
		for (auto node : initial)
			lut_distances.erase(node);

		pool<RTLIL::SigBit> worklist = initial;
		while (!worklist.empty())
		{
			auto lut = worklist.pop();
			int lut_distance = 0;
			if (forward && inputs[lut])
				lut_distance = labels[lut]; // to support (* $flowmap_level=n *)
			for (auto lut_prev : lut_edges_prev[lut])
				if ((lut_nodes[lut_prev] || inputs[lut_prev]) && lut_distances.count(lut_prev))
					lut_distance = max(lut_distance, lut_distances[lut_prev] + 1);
			if (!lut_distances.count(lut) || lut_distances[lut] != lut_distance)
			{
				lut_distances[lut] = lut_distance;
				if (changed != nullptr && !inputs[lut])
					changed->insert(lut);
				for (auto lut_next : lut_edges_next[lut])
					if (lut_nodes[lut_next] || inputs[lut_next])
						worklist.insert(lut_next);
			}
		}
	}

	void check_lut_distances(const dict<RTLIL::SigBit, int> &lut_distances, bool forward)
	{
		dict<RTLIL::SigBit, int> gold_lut_distances;
		compute_lut_distances(gold_lut_distances, forward);
		for (auto lut_distance : lut_distances)
			if (lut_nodes[lut_distance.first])
				log_assert(lut_distance.second == gold_lut_distances[lut_distance.first]);
	}

	// LUT depth is the length of the longest path from any input in LUT fan-in to LUT.
	// LUT altitude (for lack of a better term) is the length of the longest path from LUT to any output in LUT fan-out.
	void update_lut_depths_altitudes(pool<RTLIL::SigBit> worklist = {}, pool<RTLIL::SigBit> *changed = nullptr)
	{
		compute_lut_distances(lut_depths, /*forward=*/true, worklist, changed);
		compute_lut_distances(lut_altitudes, /*forward=*/false, worklist, changed);
		if (debug_relax && !worklist.empty()) {
			check_lut_distances(lut_depths, /*forward=*/true);
			check_lut_distances(lut_altitudes, /*forward=*/false);
		}
	}

	// LUT critical output set is the set of outputs whose depth will increase (equivalently, slack will decrease) if the depth of
	// the LUT increases. (This is referred to as RPOv for LUTv in the paper.)
	void compute_lut_critical_outputs(dict<RTLIL::SigBit, pool<RTLIL::SigBit>> &lut_critical_outputs,
	                                  pool<RTLIL::SigBit> worklist = {})
	{
		if (worklist.empty())
			worklist = lut_nodes;

		while (!worklist.empty())
		{
			bool updated_some = false;
			for (auto lut : worklist)
			{
				if (outputs[lut])
					lut_critical_outputs[lut] = {lut};
				else
				{
					bool all_succ_computed = true;
					lut_critical_outputs[lut] = {};
					for (auto lut_succ : lut_edges_fw[lut])
					{
						if (lut_nodes[lut_succ] && lut_depths[lut_succ] == lut_depths[lut] + 1)
						{
							if (lut_critical_outputs.count(lut_succ))
								lut_critical_outputs[lut].insert(lut_critical_outputs[lut_succ].begin(), lut_critical_outputs[lut_succ].end());
							else
							{
								all_succ_computed = false;
								break;
							}
						}
					}
					if (!all_succ_computed)
					{
						lut_critical_outputs.erase(lut);
						continue;
					}
				}
				worklist.erase(lut);
				updated_some = true;
			}
			log_assert(updated_some);
		}
	}

	// Invalidating LUT critical output sets is tricky, because increasing the depth of a LUT may take other, adjacent LUTs off the critical
	// path to the output. Conservatively, if we increase depth of some LUT, every LUT in its input cone needs to have its critical output
	// set invalidated, too.
	pool<RTLIL::SigBit> invalidate_lut_critical_outputs(dict<RTLIL::SigBit, pool<RTLIL::SigBit>> &lut_critical_outputs,
	                                                    pool<RTLIL::SigBit> worklist)
	{
		pool<RTLIL::SigBit> changed;
		while (!worklist.empty())
		{
			auto lut = worklist.pop();
			changed.insert(lut);
			lut_critical_outputs.erase(lut);
			for (auto lut_pred : lut_edges_bw[lut])
			{
				if (lut_nodes[lut_pred] && !changed[lut_pred])
				{
					changed.insert(lut_pred);
					worklist.insert(lut_pred);
				}
			}
		}
		return changed;
	}

	void check_lut_critical_outputs(const dict<RTLIL::SigBit, pool<RTLIL::SigBit>> &lut_critical_outputs)
	{
		dict<RTLIL::SigBit, pool<RTLIL::SigBit>> gold_lut_critical_outputs;
		compute_lut_critical_outputs(gold_lut_critical_outputs);
		for (auto lut_critical_output : lut_critical_outputs)
			if (lut_nodes[lut_critical_output.first])
				log_assert(lut_critical_output.second == gold_lut_critical_outputs[lut_critical_output.first]);
	}

	void update_lut_critical_outputs(dict<RTLIL::SigBit, pool<RTLIL::SigBit>> &lut_critical_outputs,
	                                 pool<RTLIL::SigBit> worklist = {})
	{
		if (!worklist.empty())
		{
			pool<RTLIL::SigBit> invalidated = invalidate_lut_critical_outputs(lut_critical_outputs, worklist);
			compute_lut_critical_outputs(lut_critical_outputs, invalidated);
			check_lut_critical_outputs(lut_critical_outputs);
		}
		else
			compute_lut_critical_outputs(lut_critical_outputs);
	}

	void update_breaking_node_potentials(dict<RTLIL::SigBit, dict<RTLIL::SigBit, int>> &potentials,
	                                     const dict<RTLIL::SigBit, pool<RTLIL::SigBit>> &lut_critical_outputs)
	{
		for (auto lut : lut_nodes)
		{
			if (potentials.count(lut))
				continue;
			if (lut_gates[lut].size() == 1 || lut_slacks[lut] == 0)
				continue;

			if (debug_relax)
				log("  Computing potentials for LUT %s.\n", log_signal(lut));

			for (auto lut_gate : lut_gates[lut])
			{
				if (lut == lut_gate)
					continue;

				if (debug_relax)
					log("    Considering breaking node %s.\n", log_signal(lut_gate));

				int r_ex, r_im, r_slk;

				auto cut_inputs = cut_lut_at_gate(lut, lut_gate);
				pool<RTLIL::SigBit> gate_inputs = cut_inputs.first, other_inputs = cut_inputs.second;
				if (gate_inputs.empty() && (int)other_inputs.size() == order)
				{
					if (debug_relax)
						log("      Breaking would result in a (k+1)-LUT.\n");
					continue;
				}

				pool<RTLIL::SigBit> elim_fanin_luts;
				for (auto gate_input : gate_inputs)
				{
					if (lut_edges_fw[gate_input].size() == 1)
					{
						log_assert(lut_edges_fw[gate_input][lut]);
						elim_fanin_luts.insert(gate_input);
					}
				}
				if (debug_relax)
				{
					if (!lut_nodes[lut_gate])
						log("      Breaking requires a new LUT.\n");
					if (!gate_inputs.empty())
					{
						log("      Breaking eliminates LUT inputs");
						for (auto gate_input : gate_inputs)
							log(" %s", log_signal(gate_input));
						log(".\n");
					}
					if (!elim_fanin_luts.empty())
					{
						log("      Breaking eliminates fan-in LUTs");
						for (auto elim_fanin_lut : elim_fanin_luts)
							log(" %s", log_signal(elim_fanin_lut));
						log(".\n");
					}
				}
				r_ex = (lut_nodes[lut_gate] ? 0 : -1) + elim_fanin_luts.size();

				pool<pair<RTLIL::SigBit, RTLIL::SigBit>> maybe_mergeable_luts;

				// Try to merge LUTv with one of its successors.
				RTLIL::SigBit last_lut_succ;
				int fanout = 0;
				for (auto lut_succ : lut_edges_fw[lut])
				{
					if (lut_nodes[lut_succ])
					{
						fanout++;
						last_lut_succ = lut_succ;
					}
				}
				if (fanout == 1)
					maybe_mergeable_luts.insert({lut, last_lut_succ});

				// Try to merge LUTv with one of its predecessors.
				for (auto lut_pred : other_inputs)
				{
					int fanout = 0;
					for (auto lut_pred_succ : lut_edges_fw[lut_pred])
						if (lut_nodes[lut_pred_succ] || lut_pred_succ == lut_gate)
							fanout++;
					if (fanout == 1)
						maybe_mergeable_luts.insert({lut_pred, lut});
				}

				// Try to merge LUTw with one of its predecessors.
				for (auto lut_gate_pred : lut_edges_bw[lut_gate])
				{
					int fanout = 0;
					for (auto lut_gate_pred_succ : lut_edges_fw[lut_gate_pred])
						if (lut_nodes[lut_gate_pred_succ] || lut_gate_pred_succ == lut_gate)
							fanout++;
					if (fanout == 1)
						maybe_mergeable_luts.insert({lut_gate_pred, lut_gate});
				}

				r_im = 0;
				for (auto maybe_mergeable_pair : maybe_mergeable_luts)
				{
					log_assert(lut_edges_fw[maybe_mergeable_pair.first][maybe_mergeable_pair.second]);
					pool<RTLIL::SigBit> unique_inputs;
					for (auto fst_lut_pred : lut_edges_bw[maybe_mergeable_pair.first])
						if (lut_nodes[fst_lut_pred])
							unique_inputs.insert(fst_lut_pred);
					for (auto snd_lut_pred : lut_edges_bw[maybe_mergeable_pair.second])
						if (lut_nodes[snd_lut_pred])
							unique_inputs.insert(snd_lut_pred);
					unique_inputs.erase(maybe_mergeable_pair.first);
					if ((int)unique_inputs.size() <= order)
					{
						if (debug_relax)
							log("      Breaking may allow merging %s and %s.\n",
							    log_signal(maybe_mergeable_pair.first), log_signal(maybe_mergeable_pair.second));
						r_im++;
					}
				}

				int lut_gate_depth;
				if (lut_nodes[lut_gate])
					lut_gate_depth = lut_depths[lut_gate];
				else
				{
					lut_gate_depth = 0;
					for (auto lut_gate_pred : lut_edges_bw[lut_gate])
						lut_gate_depth = max(lut_gate_depth, lut_depths[lut_gate_pred] + 1);
				}
				if (lut_depths[lut] >= lut_gate_depth + 1)
					r_slk = 0;
				else
				{
					int depth_delta = lut_gate_depth + 1 - lut_depths[lut];
					if (depth_delta > lut_slacks[lut])
					{
						if (debug_relax)
							log("      Breaking would increase depth by %d, which is more than available slack.\n", depth_delta);
						continue;
					}

					if (debug_relax)
					{
						log("      Breaking increases depth of LUT by %d.\n", depth_delta);
						if (lut_critical_outputs.at(lut).size())
						{
							log("      Breaking decreases slack of outputs");
							for (auto lut_critical_output : lut_critical_outputs.at(lut))
							{
								log(" %s", log_signal(lut_critical_output));
								log_assert(lut_slacks[lut_critical_output] > 0);
							}
							log(".\n");
						}
					}
					r_slk = lut_critical_outputs.at(lut).size() * depth_delta;
				}

				int p = 100 * (r_alpha * r_ex + r_beta * r_im + r_gamma) / (r_slk + 1);
				if (debug_relax)
					log("    Potential for breaking node %s: %d (Rex=%d, Rim=%d, Rslk=%d).\n",
					    log_signal(lut_gate), p, r_ex, r_im, r_slk);
				potentials[lut][lut_gate] = p;
			}
		}
	}

	bool relax_depth_for_bound(bool first, int depth_bound, dict<RTLIL::SigBit, pool<RTLIL::SigBit>> &lut_critical_outputs)
	{
		int initial_count = GetSize(lut_nodes);

		for (auto node : lut_nodes)
		{
			lut_slacks[node] = depth_bound - (lut_depths[node] + lut_altitudes[node]);
			log_assert(lut_slacks[node] >= 0);
		}
		if (debug)
		{
			dump_dot_lut_graph(stringf("flowmap-relax-%d-initial.dot", depth_bound), GraphMode::Slack);
			log("  Dumped initial slack graph to `flowmap-relax-%d-initial.dot`.\n", depth_bound);
		}

		dict<RTLIL::SigBit, dict<RTLIL::SigBit, int>> potentials;
		for (int break_num = 1; ; break_num++)
		{
			update_breaking_node_potentials(potentials, lut_critical_outputs);

			if (potentials.empty())
			{
				log("  Relaxed to %d (+%d) LUTs.\n", GetSize(lut_nodes), GetSize(lut_nodes) - initial_count);
				if (!first && break_num == 1)
				{
					log("  Design fully relaxed.\n");
					return true;
				}
				else
				{
					log("  Slack exhausted.\n");
					break;
				}
			}

			RTLIL::SigBit breaking_lut, breaking_gate;
			int best_potential = INT_MIN;
			for (auto lut_gate_potentials : potentials)
			{
				for (auto gate_potential : lut_gate_potentials.second)
				{
					if (gate_potential.second > best_potential)
					{
						breaking_lut = lut_gate_potentials.first;
						breaking_gate = gate_potential.first;
						best_potential = gate_potential.second;
					}
				}
			}
			log("  Breaking LUT %s to %s LUT %s (potential %d).\n",
			    log_signal(breaking_lut), lut_nodes[breaking_gate] ? "reuse" : "extract", log_signal(breaking_gate), best_potential);

			if (debug_relax)
				log("    Removing breaking gate %s from LUT.\n", log_signal(breaking_gate));
			lut_gates[breaking_lut].erase(breaking_gate);

			auto cut_inputs = cut_lut_at_gate(breaking_lut, breaking_gate);
			pool<RTLIL::SigBit> gate_inputs = cut_inputs.first, other_inputs = cut_inputs.second;

			pool<RTLIL::SigBit> worklist = lut_gates[breaking_lut];
			pool<RTLIL::SigBit> elim_gates = gate_inputs;
			while (!worklist.empty())
			{
				auto lut_gate = worklist.pop();
				bool all_gate_preds_elim = true;
				for (auto lut_gate_pred : edges_bw[lut_gate])
					if (!elim_gates[lut_gate_pred])
						all_gate_preds_elim = false;
				if (all_gate_preds_elim)
				{
					if (debug_relax)
						log("    Removing gate %s from LUT.\n", log_signal(lut_gate));
					lut_gates[breaking_lut].erase(lut_gate);
					for (auto lut_gate_succ : edges_fw[lut_gate])
						worklist.insert(lut_gate_succ);
				}
			}
			log_assert(!lut_gates[breaking_lut].empty());

			pool<RTLIL::SigBit> directly_affected_nodes = {breaking_lut};
			for (auto gate_input : gate_inputs)
			{
				if (debug_relax)
					log("    Removing LUT edge %s -> %s.\n", log_signal(gate_input), log_signal(breaking_lut));
				remove_lut_edge(gate_input, breaking_lut, &directly_affected_nodes);
			}
			if (debug_relax)
				log("    Adding LUT edge %s -> %s.\n", log_signal(breaking_gate), log_signal(breaking_lut));
			add_lut_edge(breaking_gate, breaking_lut, &directly_affected_nodes);

			if (debug_relax)
				log("  Updating slack and potentials.\n");

			pool<RTLIL::SigBit> indirectly_affected_nodes = {};
			update_lut_depths_altitudes(directly_affected_nodes, &indirectly_affected_nodes);
			update_lut_critical_outputs(lut_critical_outputs, indirectly_affected_nodes);
			for (auto node : indirectly_affected_nodes)
			{
				lut_slacks[node] = depth_bound - (lut_depths[node] + lut_altitudes[node]);
				log_assert(lut_slacks[node] >= 0);
				if (debug_relax)
					log("    LUT %s now has depth %d and slack %d.\n", log_signal(node), lut_depths[node], lut_slacks[node]);
			}

			worklist = indirectly_affected_nodes;
			pool<RTLIL::SigBit> visited;
			while (!worklist.empty())
			{
				auto node = worklist.pop();
				visited.insert(node);
				potentials.erase(node);
				// We are invalidating the entire output cone of the gate IR node, not just of the LUT IR node. This is done to also invalidate
				// all LUTs that could contain one of the indirectly affected nodes as a *part* of them, as they may not be in the output cone
				// of any of the LUT IR nodes, e.g. if we have a LUT IR node A and node B as predecessors of node C, where node B includes all
				// gates from node A.
				for (auto node_succ : edges_fw[node])
					if (!visited[node_succ])
						worklist.insert(node_succ);
			}

			if (debug)
			{
				dump_dot_lut_graph(stringf("flowmap-relax-%d-break-%d.dot", depth_bound, break_num), GraphMode::Slack);
				log("  Dumped slack graph after break %d to `flowmap-relax-%d-break-%d.dot`.\n",  break_num, depth_bound, break_num);
			}
		}

		return false;
	}

	void optimize_area(int depth, int optarea)
	{
		dict<RTLIL::SigBit, pool<RTLIL::SigBit>> lut_critical_outputs;
		update_lut_depths_altitudes();
		update_lut_critical_outputs(lut_critical_outputs);

		for (int depth_bound = depth; depth_bound <= depth + optarea; depth_bound++)
		{
			log("Relaxing with depth bound %d.\n", depth_bound);
			bool fully_relaxed = relax_depth_for_bound(depth_bound == depth, depth_bound, lut_critical_outputs);

			if (fully_relaxed)
				break;
		}
	}

	void pack_cells(int minlut)
	{
		ConstEval ce(module);
		for (auto input_node : inputs)
			ce.stop(input_node);

		pool<RTLIL::SigBit> mapped_nodes;
		for (auto node : lut_nodes)
		{
			if (node_origins.count(node))
			{
				auto origin = node_origins[node];
				if (origin.cell->getPort(origin.port).size() == 1)
					log("Packing %s.%s.%s (%s).\n",
					    log_id(module), log_id(origin.cell), origin.port.c_str(), log_signal(node));
				else
					log("Packing %s.%s.%s [%d] (%s).\n",
					    log_id(module), log_id(origin.cell), origin.port.c_str(), origin.offset, log_signal(node));
			}
			else
			{
				log("Packing %s.%s.\n", log_id(module), log_signal(node));
			}

			for (auto gate_node : lut_gates[node])
			{
				log_assert(node_origins.count(gate_node));

				if (gate_node == node)
					continue;

				auto gate_origin = node_origins[gate_node];
				if (gate_origin.cell->getPort(gate_origin.port).size() == 1)
					log("  Packing %s.%s.%s (%s).\n",
					    log_id(module), log_id(gate_origin.cell), gate_origin.port.c_str(), log_signal(gate_node));
				else
					log("  Packing %s.%s.%s [%d] (%s).\n",
					    log_id(module), log_id(gate_origin.cell), gate_origin.port.c_str(), gate_origin.offset, log_signal(gate_node));
			}

			vector<RTLIL::SigBit> input_nodes(lut_edges_bw[node].begin(), lut_edges_bw[node].end());
			RTLIL::Const lut_table(State::Sx, max(1 << input_nodes.size(), 1 << minlut));
			unsigned const mask = 1 << input_nodes.size();
			for (unsigned i = 0; i < mask; i++)
			{
				ce.push();
				for (size_t n = 0; n < input_nodes.size(); n++)
					ce.set(input_nodes[n], ((i >> n) & 1) ? State::S1 : State::S0);

				RTLIL::SigSpec value = node, undef;
				if (!ce.eval(value, undef))
				{
					string env;
					for (auto input_node : input_nodes)
						env += stringf("  %s = %s\n", log_signal(input_node), log_signal(ce.values_map(input_node)));
					log_error("Cannot evaluate %s because %s is not defined.\nEvaluation environment:\n%s",
					          log_signal(node), log_signal(undef), env.c_str());
				}

				lut_table[i] = value.as_bool() ? State::S1 : State::S0;
				ce.pop();
			}

			RTLIL::SigSpec lut_a, lut_y = node;
			for (auto input_node : input_nodes)
				lut_a.append_bit(input_node);
			lut_a.append(RTLIL::Const(State::Sx, minlut - input_nodes.size()));

			RTLIL::Cell *lut = module->addLut(NEW_ID, lut_a, lut_y, lut_table);
			mapped_nodes.insert(node);
			for (auto gate_node : lut_gates[node])
			{
				auto gate_origin = node_origins[gate_node];
				lut->add_strpool_attribute(ID(src), gate_origin.cell->get_strpool_attribute(ID(src)));
				packed_count++;
			}
			lut_count++;
			lut_area += lut_table.size();

			if ((int)input_nodes.size() >= minlut)
				log("  Packed into a %d-LUT %s.%s.\n", GetSize(input_nodes), log_id(module), log_id(lut));
			else
				log("  Packed into a %d-LUT %s.%s (implemented as %d-LUT).\n", GetSize(input_nodes), log_id(module), log_id(lut), minlut);
		}

		for (auto node : mapped_nodes)
		{
			auto origin = node_origins[node];
			RTLIL::SigSpec driver = origin.cell->getPort(origin.port);
			driver[origin.offset] = module->addWire(NEW_ID);
			origin.cell->setPort(origin.port, driver);
		}
	}

	FlowmapWorker(int order, int minlut, pool<IdString> cell_types, int r_alpha, int r_beta, int r_gamma,
	              bool relax, int optarea, bool debug, bool debug_relax,
	              RTLIL::Module *module) :
		order(order), r_alpha(r_alpha), r_beta(r_beta), r_gamma(r_gamma), debug(debug), debug_relax(debug_relax),
		module(module), sigmap(module), index(module)
	{
		log("Labeling cells.\n");
		discover_nodes(cell_types);
		label_nodes();
		int depth = map_luts();

		if (relax)
		{
			log("\n");
			log("Optimizing area.\n");
			optimize_area(depth, optarea);
		}

		log("\n");
		log("Packing cells.\n");
		pack_cells(minlut);
	}
};

static void split(std::vector<std::string> &tokens, const std::string &text, char sep)
{
	size_t start = 0, end = 0;
	while ((end = text.find(sep, start)) != std::string::npos) {
		tokens.push_back(text.substr(start, end - start));
		start = end + 1;
	}
	tokens.push_back(text.substr(start));
}

struct FlowmapPass : public Pass {
	FlowmapPass() : Pass("flowmap", "pack LUTs with FlowMap") { }
	void help() YS_OVERRIDE
	{
		//   |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
		log("\n");
		log("    flowmap [options] [selection]\n");
		log("\n");
		log("This pass uses the FlowMap technology mapping algorithm to pack logic gates\n");
		log("into k-LUTs with optimal depth. It allows mapping any circuit elements that can\n");
		log("be evaluated with the `eval` pass, including cells with multiple output ports\n");
		log("and multi-bit input and output ports.\n");
		log("\n");
		log("    -maxlut k\n");
		log("        perform technology mapping for a k-LUT architecture. if not specified,\n");
		log("        defaults to 3.\n");
		log("\n");
		log("    -minlut n\n");
		log("        only produce n-input or larger LUTs. if not specified, defaults to 1.\n");
		log("\n");
		log("    -cells <cell>[,<cell>,...]\n");
		log("        map specified cells. if not specified, maps $_NOT_, $_AND_, $_OR_,\n");
		log("        $_XOR_ and $_MUX_, which are the outputs of the `simplemap` pass.\n");
		log("\n");
		log("    -relax\n");
		log("        perform depth relaxation and area minimization.\n");
		log("\n");
		log("    -r-alpha n, -r-beta n, -r-gamma n\n");
		log("        parameters of depth relaxation heuristic potential function.\n");
		log("        if not specified, alpha=8, beta=2, gamma=1.\n");
		log("\n");
		log("    -optarea n\n");
		log("        optimize for area by trading off at most n logic levels for fewer LUTs.\n");
		log("        n may be zero, to optimize for area without increasing depth.\n");
		log("        implies -relax.\n");
		log("\n");
		log("    -debug\n");
		log("        dump intermediate graphs.\n");
		log("\n");
		log("    -debug-relax\n");
		log("        explain decisions performed during depth relaxation.\n");
		log("\n");
	}
	void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
	{
		int order = 3;
		int minlut = 1;
		vector<string> cells;
		bool relax = false;
		int r_alpha = 8, r_beta = 2, r_gamma = 1;
		int optarea = 0;
		bool debug = false, debug_relax = false;

		size_t argidx;
		for (argidx = 1; argidx < args.size(); argidx++)
		{
			if (args[argidx] == "-maxlut" && argidx + 1 < args.size())
			{
				order = atoi(args[++argidx].c_str());
				continue;
			}
			if (args[argidx] == "-minlut" && argidx + 1 < args.size())
			{
				minlut = atoi(args[++argidx].c_str());
				continue;
			}
			if (args[argidx] == "-cells" && argidx + 1 < args.size())
			{
				split(cells, args[++argidx], ',');
				continue;
			}
			if (args[argidx] == "-relax")
			{
				relax = true;
				continue;
			}
			if (args[argidx] == "-r-alpha" && argidx + 1 < args.size())
			{
				r_alpha = atoi(args[++argidx].c_str());
				continue;
			}
			if (args[argidx] == "-r-beta" && argidx + 1 < args.size())
			{
				r_beta = atoi(args[++argidx].c_str());
				continue;
			}
			if (args[argidx] == "-r-gamma" && argidx + 1 < args.size())
			{
				r_gamma = atoi(args[++argidx].c_str());
				continue;
			}
			if (args[argidx] == "-optarea" && argidx + 1 < args.size())
			{
				relax = true;
				optarea = atoi(args[++argidx].c_str());
				continue;
			}
			if (args[argidx] == "-debug")
			{
				debug = true;
				continue;
			}
			if (args[argidx] == "-debug-relax")
			{
				debug = debug_relax = true;
				continue;
			}
			break;
		}
		extra_args(args, argidx, design);

		pool<IdString> cell_types;
		if (!cells.empty())
		{
			for (auto &cell : cells)
				cell_types.insert(cell);
		}
		else
		{
			cell_types = {ID($_NOT_), ID($_AND_), ID($_OR_), ID($_XOR_), ID($_MUX_)};
		}

		const char *algo_r = relax ? "-r" : "";
		log_header(design, "Executing FLOWMAP pass (pack LUTs with FlowMap%s).\n", algo_r);

		int gate_count = 0, lut_count = 0, packed_count = 0;
		int gate_area = 0, lut_area = 0;
		for (auto module : design->selected_modules())
		{
			FlowmapWorker worker(order, minlut, cell_types, r_alpha, r_beta, r_gamma, relax, optarea, debug, debug_relax, module);
			gate_count += worker.gate_count;
			lut_count += worker.lut_count;
			packed_count += worker.packed_count;
			gate_area += worker.gate_area;
			lut_area += worker.lut_area;
		}

		log("\n");
		log("Packed %d cells (%d of them duplicated) into %d LUTs.\n", packed_count, packed_count - gate_count, lut_count);
		log("Solution takes %.1f%% of original gate area.\n", lut_area * 100.0 / gate_area);
	}
} FlowmapPass;

PRIVATE_NAMESPACE_END