| pattern dffmux | |
| state <IdString> cemuxAB rstmuxBA | |
| state <SigSpec> sigD | |
| match dff | |
| select dff->type == $dff | |
| select GetSize(port(dff, \D)) > 1 | |
| endmatch | |
| code sigD | |
| sigD = port(dff, \D); | |
| endcode | |
| match rstmux | |
| select rstmux->type == $mux | |
| select GetSize(port(rstmux, \Y)) > 1 | |
| index <SigSpec> port(rstmux, \Y) === sigD | |
| choice <IdString> BA {\B, \A} | |
| select port(rstmux, BA).is_fully_const() | |
| set rstmuxBA BA | |
| semioptional | |
| endmatch | |
| code sigD | |
| if (rstmux) | |
| sigD = port(rstmux, rstmuxBA == \B ? \A : \B); | |
| endcode | |
| match cemux | |
| select cemux->type == $mux | |
| select GetSize(port(cemux, \Y)) > 1 | |
| index <SigSpec> port(cemux, \Y) === sigD | |
| choice <IdString> AB {\A, \B} | |
| index <SigSpec> port(cemux, AB) === port(dff, \Q) | |
| set cemuxAB AB | |
| semioptional | |
| endmatch | |
| code | |
| if (!cemux && !rstmux) | |
| reject; | |
| endcode | |
| code | |
| Const rst; | |
| SigSpec D; | |
| if (cemux) { | |
| D = port(cemux, cemuxAB == \A ? \B : \A); | |
| if (rstmux) | |
| rst = port(rstmux, rstmuxBA).as_const(); | |
| else | |
| rst = Const(State::Sx, GetSize(D)); | |
| } | |
| else { | |
| log_assert(rstmux); | |
| D = port(rstmux, rstmuxBA == \B ? \A : \B); | |
| rst = port(rstmux, rstmuxBA).as_const(); | |
| } | |
| SigSpec Q = port(dff, \Q); | |
| int width = GetSize(D); | |
| SigSpec &dffD = dff->connections_.at(\D); | |
| SigSpec &dffQ = dff->connections_.at(\Q); | |
| Const init; | |
| for (const auto &b : Q) { | |
| auto it = b.wire->attributes.find(\init); | |
| init.bits.push_back(it == b.wire->attributes.end() ? State::Sx : it->second[b.offset]); | |
| } | |
| auto cmpx = [=](State lhs, State rhs) { | |
| if (lhs == State::Sx || rhs == State::Sx) | |
| return true; | |
| return lhs == rhs; | |
| }; | |
| int i = width-1; | |
| while (i > 1) { | |
| log_dump(i, D[i], D[i-1], rst[i], rst[i-1], init[i], init[i-1]); | |
| if (D[i] != D[i-1]) | |
| break; | |
| if (!cmpx(rst[i], rst[i-1])) | |
| break; | |
| if (!cmpx(init[i], init[i-1])) | |
| break; | |
| if (!cmpx(rst[i], init[i])) | |
| break; | |
| module->connect(Q[i], Q[i-1]); | |
| i--; | |
| } | |
| if (i < width-1) { | |
| did_something = true; | |
| if (cemux) { | |
| SigSpec &ceA = cemux->connections_.at(\A); | |
| SigSpec &ceB = cemux->connections_.at(\B); | |
| SigSpec &ceY = cemux->connections_.at(\Y); | |
| ceA.remove(i, width-1-i); | |
| ceB.remove(i, width-1-i); | |
| ceY.remove(i, width-1-i); | |
| cemux->fixup_parameters(); | |
| } | |
| if (rstmux) { | |
| SigSpec &rstA = rstmux->connections_.at(\A); | |
| SigSpec &rstB = rstmux->connections_.at(\B); | |
| SigSpec &rstY = rstmux->connections_.at(\Y); | |
| rstA.remove(i, width-1-i); | |
| rstB.remove(i, width-1-i); | |
| rstY.remove(i, width-1-i); | |
| rstmux->fixup_parameters(); | |
| } | |
| dffD.remove(i, width-1-i); | |
| dffQ.remove(i, width-1-i); | |
| dff->fixup_parameters(); | |
| log("dffcemux pattern in %s: dff=%s, cemux=%s, rstmux=%s; removed top %d bits.\n", log_id(module), log_id(dff), log_id(cemux, "n/a"), log_id(rstmux, "n/a"), width-1-i); | |
| width = i+1; | |
| } | |
| if (cemux) { | |
| SigSpec &ceA = cemux->connections_.at(\A); | |
| SigSpec &ceB = cemux->connections_.at(\B); | |
| SigSpec &ceY = cemux->connections_.at(\Y); | |
| int count = 0; | |
| for (int i = width-1; i >= 0; i--) { | |
| if (D[i].wire) | |
| continue; | |
| if (cmpx(rst[i], D[i].data) && cmpx(init[i], D[i].data)) { | |
| count++; | |
| module->connect(Q[i], D[i]); | |
| ceA.remove(i); | |
| ceB.remove(i); | |
| ceY.remove(i); | |
| dffD.remove(i); | |
| dffQ.remove(i); | |
| } | |
| } | |
| if (count > 0) { | |
| did_something = true; | |
| cemux->fixup_parameters(); | |
| dff->fixup_parameters(); | |
| log("dffcemux pattern in %s: dff=%s, cemux=%s, rstmux=%s; removed %d constant bits.\n", log_id(module), log_id(dff), log_id(cemux), log_id(rstmux, "n/a"), count); | |
| } | |
| } | |
| if (did_something) | |
| accept; | |
| endcode |