| /* | |
| * yosys -- Yosys Open SYnthesis Suite | |
| * | |
| * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at> | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| * | |
| */ | |
| #include "kernel/yosys.h" | |
| #include "kernel/sigtools.h" | |
| #include "kernel/celltypes.h" | |
| #include "passes/techmap/simplemap.h" | |
| USING_YOSYS_NAMESPACE | |
| PRIVATE_NAMESPACE_BEGIN | |
| struct Dff2dffeWorker | |
| { | |
| const dict<IdString, IdString> &direct_dict; | |
| RTLIL::Module *module; | |
| SigMap sigmap; | |
| CellTypes ct; | |
| typedef std::pair<RTLIL::Cell*, int> cell_int_t; | |
| std::map<RTLIL::SigBit, cell_int_t> bit2mux; | |
| std::vector<RTLIL::Cell*> dff_cells; | |
| std::map<RTLIL::SigBit, int> bitusers; | |
| typedef std::map<RTLIL::SigBit, bool> pattern_t; | |
| typedef std::set<pattern_t> patterns_t; | |
| Dff2dffeWorker(RTLIL::Module *module, const dict<IdString, IdString> &direct_dict) : | |
| direct_dict(direct_dict), module(module), sigmap(module), ct(module->design) | |
| { | |
| for (auto wire : module->wires()) { | |
| if (wire->port_output) | |
| for (auto bit : sigmap(wire)) | |
| bitusers[bit]++; | |
| } | |
| for (auto cell : module->cells()) { | |
| if (cell->type.in(ID($mux), ID($pmux), ID($_MUX_))) { | |
| RTLIL::SigSpec sig_y = sigmap(cell->getPort(ID::Y)); | |
| for (int i = 0; i < GetSize(sig_y); i++) | |
| bit2mux[sig_y[i]] = cell_int_t(cell, i); | |
| } | |
| if (direct_dict.empty()) { | |
| if (cell->type.in(ID($dff), ID($_DFF_N_), ID($_DFF_P_))) | |
| dff_cells.push_back(cell); | |
| } else { | |
| if (direct_dict.count(cell->type)) | |
| dff_cells.push_back(cell); | |
| } | |
| for (auto conn : cell->connections()) { | |
| if (ct.cell_output(cell->type, conn.first)) | |
| continue; | |
| for (auto bit : sigmap(conn.second)) | |
| bitusers[bit]++; | |
| } | |
| } | |
| } | |
| patterns_t find_muxtree_feedback_patterns(RTLIL::SigBit d, RTLIL::SigBit q, pattern_t path) | |
| { | |
| patterns_t ret; | |
| if (d == q) { | |
| ret.insert(path); | |
| return ret; | |
| } | |
| if (bit2mux.count(d) == 0 || bitusers[d] > 1) | |
| return ret; | |
| cell_int_t mux_cell_int = bit2mux.at(d); | |
| RTLIL::SigSpec sig_a = sigmap(mux_cell_int.first->getPort(ID::A)); | |
| RTLIL::SigSpec sig_b = sigmap(mux_cell_int.first->getPort(ID::B)); | |
| RTLIL::SigSpec sig_s = sigmap(mux_cell_int.first->getPort(ID(S))); | |
| int width = GetSize(sig_a), index = mux_cell_int.second; | |
| for (int i = 0; i < GetSize(sig_s); i++) | |
| if (path.count(sig_s[i]) && path.at(sig_s[i])) | |
| { | |
| ret = find_muxtree_feedback_patterns(sig_b[i*width + index], q, path); | |
| if (sig_b[i*width + index] == q) { | |
| RTLIL::SigSpec s = mux_cell_int.first->getPort(ID::B); | |
| s[i*width + index] = RTLIL::Sx; | |
| mux_cell_int.first->setPort(ID::B, s); | |
| } | |
| return ret; | |
| } | |
| pattern_t path_else = path; | |
| for (int i = 0; i < GetSize(sig_s); i++) | |
| { | |
| if (path.count(sig_s[i])) | |
| continue; | |
| pattern_t path_this = path; | |
| path_else[sig_s[i]] = false; | |
| path_this[sig_s[i]] = true; | |
| for (auto &pat : find_muxtree_feedback_patterns(sig_b[i*width + index], q, path_this)) | |
| ret.insert(pat); | |
| if (sig_b[i*width + index] == q) { | |
| RTLIL::SigSpec s = mux_cell_int.first->getPort(ID::B); | |
| s[i*width + index] = RTLIL::Sx; | |
| mux_cell_int.first->setPort(ID::B, s); | |
| } | |
| } | |
| for (auto &pat : find_muxtree_feedback_patterns(sig_a[index], q, path_else)) | |
| ret.insert(pat); | |
| if (sig_a[index] == q) { | |
| RTLIL::SigSpec s = mux_cell_int.first->getPort(ID::A); | |
| s[index] = RTLIL::Sx; | |
| mux_cell_int.first->setPort(ID::A, s); | |
| } | |
| return ret; | |
| } | |
| void simplify_patterns(patterns_t&) | |
| { | |
| // TBD | |
| } | |
| RTLIL::SigSpec make_patterns_logic(patterns_t patterns, bool make_gates) | |
| { | |
| RTLIL::SigSpec or_input; | |
| for (auto pat : patterns) | |
| { | |
| RTLIL::SigSpec s1, s2; | |
| for (auto it : pat) { | |
| s1.append(it.first); | |
| s2.append(it.second); | |
| } | |
| RTLIL::SigSpec y = module->addWire(NEW_ID); | |
| RTLIL::Cell *c = module->addNe(NEW_ID, s1, s2, y); | |
| if (make_gates) { | |
| simplemap(module, c); | |
| module->remove(c); | |
| } | |
| or_input.append(y); | |
| } | |
| if (GetSize(or_input) == 0) | |
| return State::S1; | |
| if (GetSize(or_input) == 1) | |
| return or_input; | |
| RTLIL::SigSpec y = module->addWire(NEW_ID); | |
| RTLIL::Cell *c = module->addReduceAnd(NEW_ID, or_input, y); | |
| if (make_gates) { | |
| simplemap(module, c); | |
| module->remove(c); | |
| } | |
| return y; | |
| } | |
| void handle_dff_cell(RTLIL::Cell *dff_cell) | |
| { | |
| RTLIL::SigSpec sig_d = sigmap(dff_cell->getPort(ID(D))); | |
| RTLIL::SigSpec sig_q = sigmap(dff_cell->getPort(ID(Q))); | |
| std::map<patterns_t, std::set<int>> grouped_patterns; | |
| std::set<int> remaining_indices; | |
| for (int i = 0 ; i < GetSize(sig_d); i++) { | |
| patterns_t patterns = find_muxtree_feedback_patterns(sig_d[i], sig_q[i], pattern_t()); | |
| if (!patterns.empty()) { | |
| simplify_patterns(patterns); | |
| grouped_patterns[patterns].insert(i); | |
| } else | |
| remaining_indices.insert(i); | |
| } | |
| for (auto &it : grouped_patterns) { | |
| RTLIL::SigSpec new_sig_d, new_sig_q; | |
| for (int i : it.second) { | |
| new_sig_d.append(sig_d[i]); | |
| new_sig_q.append(sig_q[i]); | |
| } | |
| if (!direct_dict.empty()) { | |
| log(" converting %s cell %s to %s for %s -> %s.\n", log_id(dff_cell->type), log_id(dff_cell), log_id(direct_dict.at(dff_cell->type)), log_signal(new_sig_d), log_signal(new_sig_q)); | |
| dff_cell->setPort(ID(E), make_patterns_logic(it.first, true)); | |
| dff_cell->type = direct_dict.at(dff_cell->type); | |
| } else | |
| if (dff_cell->type == ID($dff)) { | |
| RTLIL::Cell *new_cell = module->addDffe(NEW_ID, dff_cell->getPort(ID(CLK)), make_patterns_logic(it.first, false), | |
| new_sig_d, new_sig_q, dff_cell->getParam(ID(CLK_POLARITY)).as_bool(), true); | |
| log(" created $dffe cell %s for %s -> %s.\n", log_id(new_cell), log_signal(new_sig_d), log_signal(new_sig_q)); | |
| } else { | |
| RTLIL::Cell *new_cell = module->addDffeGate(NEW_ID, dff_cell->getPort(ID(C)), make_patterns_logic(it.first, true), | |
| new_sig_d, new_sig_q, dff_cell->type == ID($_DFF_P_), true); | |
| log(" created %s cell %s for %s -> %s.\n", log_id(new_cell->type), log_id(new_cell), log_signal(new_sig_d), log_signal(new_sig_q)); | |
| } | |
| } | |
| if (!direct_dict.empty()) | |
| return; | |
| if (remaining_indices.empty()) { | |
| log(" removing now obsolete cell %s.\n", log_id(dff_cell)); | |
| module->remove(dff_cell); | |
| } else if (GetSize(remaining_indices) != GetSize(sig_d)) { | |
| log(" removing %d now obsolete bits from cell %s.\n", GetSize(sig_d) - GetSize(remaining_indices), log_id(dff_cell)); | |
| RTLIL::SigSpec new_sig_d, new_sig_q; | |
| for (int i : remaining_indices) { | |
| new_sig_d.append(sig_d[i]); | |
| new_sig_q.append(sig_q[i]); | |
| } | |
| dff_cell->setPort(ID(D), new_sig_d); | |
| dff_cell->setPort(ID(Q), new_sig_q); | |
| dff_cell->setParam(ID(WIDTH), GetSize(remaining_indices)); | |
| } | |
| } | |
| void run() | |
| { | |
| log("Transforming FF to FF+Enable cells in module %s:\n", log_id(module)); | |
| for (auto dff_cell : dff_cells) { | |
| // log("Handling candidate %s:\n", log_id(dff_cell)); | |
| handle_dff_cell(dff_cell); | |
| } | |
| } | |
| }; | |
| struct Dff2dffePass : public Pass { | |
| Dff2dffePass() : Pass("dff2dffe", "transform $dff cells to $dffe cells") { } | |
| void help() YS_OVERRIDE | |
| { | |
| // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---| | |
| log("\n"); | |
| log(" dff2dffe [options] [selection]\n"); | |
| log("\n"); | |
| log("This pass transforms $dff cells driven by a tree of multiplexers with one or\n"); | |
| log("more feedback paths to $dffe cells. It also works on gate-level cells such as\n"); | |
| log("$_DFF_P_, $_DFF_N_ and $_MUX_.\n"); | |
| log("\n"); | |
| log(" -unmap\n"); | |
| log(" operate in the opposite direction: replace $dffe cells with combinations\n"); | |
| log(" of $dff and $mux cells. the options below are ignored in unmap mode.\n"); | |
| log("\n"); | |
| log(" -unmap-mince N\n"); | |
| log(" Same as -unmap but only unmap $dffe where the clock enable port\n"); | |
| log(" signal is used by less $dffe than the specified number\n"); | |
| log("\n"); | |
| log(" -direct <internal_gate_type> <external_gate_type>\n"); | |
| log(" map directly to external gate type. <internal_gate_type> can\n"); | |
| log(" be any internal gate-level FF cell (except $_DFFE_??_). the\n"); | |
| log(" <external_gate_type> is the cell type name for a cell with an\n"); | |
| log(" identical interface to the <internal_gate_type>, except it\n"); | |
| log(" also has an high-active enable port 'E'.\n"); | |
| log(" Usually <external_gate_type> is an intermediate cell type\n"); | |
| log(" that is then translated to the final type using 'techmap'.\n"); | |
| log("\n"); | |
| log(" -direct-match <pattern>\n"); | |
| log(" like -direct for all DFF cell types matching the expression.\n"); | |
| log(" this will use $__DFFE_* as <external_gate_type> matching the\n"); | |
| log(" internal gate type $_DFF_*_, and $__DFFSE_* for those matching\n"); | |
| log(" $_DFFS_*_, except for $_DFF_[NP]_, which is converted to \n"); | |
| log(" $_DFFE_[NP]_.\n"); | |
| log("\n"); | |
| } | |
| void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE | |
| { | |
| log_header(design, "Executing DFF2DFFE pass (transform $dff to $dffe where applicable).\n"); | |
| bool unmap_mode = false; | |
| int min_ce_use = -1; | |
| dict<IdString, IdString> direct_dict; | |
| size_t argidx; | |
| for (argidx = 1; argidx < args.size(); argidx++) { | |
| if (args[argidx] == "-unmap") { | |
| unmap_mode = true; | |
| continue; | |
| } | |
| if (args[argidx] == "-unmap-mince" && argidx + 1 < args.size()) { | |
| unmap_mode = true; | |
| min_ce_use = atoi(args[++argidx].c_str()); | |
| continue; | |
| } | |
| if (args[argidx] == "-direct" && argidx + 2 < args.size()) { | |
| string direct_from = RTLIL::escape_id(args[++argidx]); | |
| string direct_to = RTLIL::escape_id(args[++argidx]); | |
| direct_dict[direct_from] = direct_to; | |
| continue; | |
| } | |
| if (args[argidx] == "-direct-match" && argidx + 1 < args.size()) { | |
| bool found_match = false; | |
| const char *pattern = args[++argidx].c_str(); | |
| if (patmatch(pattern, "$_DFF_P_" )) found_match = true, direct_dict[ID($_DFF_P_) ] = ID($_DFFE_PP_); | |
| if (patmatch(pattern, "$_DFF_N_" )) found_match = true, direct_dict[ID($_DFF_N_) ] = ID($_DFFE_NP_); | |
| if (patmatch(pattern, "$_DFF_NN0_")) found_match = true, direct_dict[ID($_DFF_NN0_)] = ID($__DFFE_NN0); | |
| if (patmatch(pattern, "$_DFF_NN1_")) found_match = true, direct_dict[ID($_DFF_NN1_)] = ID($__DFFE_NN1); | |
| if (patmatch(pattern, "$_DFF_NP0_")) found_match = true, direct_dict[ID($_DFF_NP0_)] = ID($__DFFE_NP0); | |
| if (patmatch(pattern, "$_DFF_NP1_")) found_match = true, direct_dict[ID($_DFF_NP1_)] = ID($__DFFE_NP1); | |
| if (patmatch(pattern, "$_DFF_PN0_")) found_match = true, direct_dict[ID($_DFF_PN0_)] = ID($__DFFE_PN0); | |
| if (patmatch(pattern, "$_DFF_PN1_")) found_match = true, direct_dict[ID($_DFF_PN1_)] = ID($__DFFE_PN1); | |
| if (patmatch(pattern, "$_DFF_PP0_")) found_match = true, direct_dict[ID($_DFF_PP0_)] = ID($__DFFE_PP0); | |
| if (patmatch(pattern, "$_DFF_PP1_")) found_match = true, direct_dict[ID($_DFF_PP1_)] = ID($__DFFE_PP1); | |
| if (patmatch(pattern, "$__DFFS_NN0_")) found_match = true, direct_dict[ID($__DFFS_NN0_)] = ID($__DFFSE_NN0); | |
| if (patmatch(pattern, "$__DFFS_NN1_")) found_match = true, direct_dict[ID($__DFFS_NN1_)] = ID($__DFFSE_NN1); | |
| if (patmatch(pattern, "$__DFFS_NP0_")) found_match = true, direct_dict[ID($__DFFS_NP0_)] = ID($__DFFSE_NP0); | |
| if (patmatch(pattern, "$__DFFS_NP1_")) found_match = true, direct_dict[ID($__DFFS_NP1_)] = ID($__DFFSE_NP1); | |
| if (patmatch(pattern, "$__DFFS_PN0_")) found_match = true, direct_dict[ID($__DFFS_PN0_)] = ID($__DFFSE_PN0); | |
| if (patmatch(pattern, "$__DFFS_PN1_")) found_match = true, direct_dict[ID($__DFFS_PN1_)] = ID($__DFFSE_PN1); | |
| if (patmatch(pattern, "$__DFFS_PP0_")) found_match = true, direct_dict[ID($__DFFS_PP0_)] = ID($__DFFSE_PP0); | |
| if (patmatch(pattern, "$__DFFS_PP1_")) found_match = true, direct_dict[ID($__DFFS_PP1_)] = ID($__DFFSE_PP1); | |
| if (!found_match) | |
| log_cmd_error("No cell types matched pattern '%s'.\n", pattern); | |
| continue; | |
| } | |
| break; | |
| } | |
| extra_args(args, argidx, design); | |
| if (!direct_dict.empty()) { | |
| log("Selected cell types for direct conversion:\n"); | |
| for (auto &it : direct_dict) | |
| log(" %s -> %s\n", log_id(it.first), log_id(it.second)); | |
| } | |
| for (auto mod : design->selected_modules()) | |
| if (!mod->has_processes_warn()) | |
| { | |
| if (unmap_mode) { | |
| SigMap sigmap(mod); | |
| for (auto cell : mod->selected_cells()) { | |
| if (cell->type == ID($dffe)) { | |
| if (min_ce_use >= 0) { | |
| int ce_use = 0; | |
| for (auto cell_other : mod->selected_cells()) { | |
| if (cell_other->type != cell->type) | |
| continue; | |
| if (sigmap(cell->getPort(ID(EN))) == sigmap(cell_other->getPort(ID(EN)))) | |
| ce_use++; | |
| } | |
| if (ce_use >= min_ce_use) | |
| continue; | |
| } | |
| RTLIL::SigSpec tmp = mod->addWire(NEW_ID, GetSize(cell->getPort(ID(D)))); | |
| mod->addDff(NEW_ID, cell->getPort(ID(CLK)), tmp, cell->getPort(ID(Q)), cell->getParam(ID(CLK_POLARITY)).as_bool()); | |
| if (cell->getParam(ID(EN_POLARITY)).as_bool()) | |
| mod->addMux(NEW_ID, cell->getPort(ID(Q)), cell->getPort(ID(D)), cell->getPort(ID(EN)), tmp); | |
| else | |
| mod->addMux(NEW_ID, cell->getPort(ID(D)), cell->getPort(ID(Q)), cell->getPort(ID(EN)), tmp); | |
| mod->remove(cell); | |
| continue; | |
| } | |
| if (cell->type.begins_with("$_DFFE_")) { | |
| if (min_ce_use >= 0) { | |
| int ce_use = 0; | |
| for (auto cell_other : mod->selected_cells()) { | |
| if (cell_other->type != cell->type) | |
| continue; | |
| if (sigmap(cell->getPort(ID(E))) == sigmap(cell_other->getPort(ID(E)))) | |
| ce_use++; | |
| } | |
| if (ce_use >= min_ce_use) | |
| continue; | |
| } | |
| bool clk_pol = cell->type.compare(7, 1, "P") == 0; | |
| bool en_pol = cell->type.compare(8, 1, "P") == 0; | |
| RTLIL::SigSpec tmp = mod->addWire(NEW_ID); | |
| mod->addDff(NEW_ID, cell->getPort(ID(C)), tmp, cell->getPort(ID(Q)), clk_pol); | |
| if (en_pol) | |
| mod->addMux(NEW_ID, cell->getPort(ID(Q)), cell->getPort(ID(D)), cell->getPort(ID(E)), tmp); | |
| else | |
| mod->addMux(NEW_ID, cell->getPort(ID(D)), cell->getPort(ID(Q)), cell->getPort(ID(E)), tmp); | |
| mod->remove(cell); | |
| continue; | |
| } | |
| } | |
| continue; | |
| } | |
| Dff2dffeWorker worker(mod, direct_dict); | |
| worker.run(); | |
| } | |
| } | |
| } Dff2dffePass; | |
| PRIVATE_NAMESPACE_END |