| // Copyright (C) 2020-2021 The SymbiFlow Authors. |
| // |
| // Use of this source code is governed by a ISC-style |
| // license that can be found in the LICENSE file or at |
| // https://opensource.org/licenses/ISC |
| // |
| // SPDX-License-Identifier:ISC |
| |
| `define MODE_36 3'b011 // 36 or 32-bit |
| `define MODE_18 3'b010 // 18 or 16-bit |
| `define MODE_9 3'b001 // 9 or 8-bit |
| `define MODE_4 3'b100 // 4-bit |
| `define MODE_2 3'b110 // 32-bit |
| `define MODE_1 3'b101 // 32-bit |
| |
| module BRAM2x18_TDP (A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN, C1ADDR, C1DATA, C1EN, CLK1, CLK2, CLK3, CLK4, D1ADDR, D1DATA, D1EN, E1ADDR, E1DATA, E1EN, F1ADDR, F1DATA, F1EN, G1ADDR, G1DATA, G1EN, H1ADDR, H1DATA, H1EN); |
| parameter CFG_ABITS = 11; |
| parameter CFG_DBITS = 18; |
| parameter CFG_ENABLE_B = 4; |
| parameter CFG_ENABLE_D = 4; |
| parameter CFG_ENABLE_F = 4; |
| parameter CFG_ENABLE_H = 4; |
| |
| parameter CLKPOL2 = 1; |
| parameter CLKPOL3 = 1; |
| parameter [18431:0] INIT0 = 18432'bx; |
| parameter [18431:0] INIT1 = 18432'bx; |
| |
| input CLK1; |
| input CLK2; |
| input CLK3; |
| input CLK4; |
| |
| input [CFG_ABITS-1:0] A1ADDR; |
| output [CFG_DBITS-1:0] A1DATA; |
| input A1EN; |
| |
| input [CFG_ABITS-1:0] B1ADDR; |
| input [CFG_DBITS-1:0] B1DATA; |
| input [CFG_ENABLE_B-1:0] B1EN; |
| |
| input [CFG_ABITS-1:0] C1ADDR; |
| output [CFG_DBITS-1:0] C1DATA; |
| input C1EN; |
| |
| input [CFG_ABITS-1:0] D1ADDR; |
| input [CFG_DBITS-1:0] D1DATA; |
| input [CFG_ENABLE_D-1:0] D1EN; |
| |
| input [CFG_ABITS-1:0] E1ADDR; |
| output [CFG_DBITS-1:0] E1DATA; |
| input E1EN; |
| |
| input [CFG_ABITS-1:0] F1ADDR; |
| input [CFG_DBITS-1:0] F1DATA; |
| input [CFG_ENABLE_F-1:0] F1EN; |
| |
| input [CFG_ABITS-1:0] G1ADDR; |
| output [CFG_DBITS-1:0] G1DATA; |
| input G1EN; |
| |
| input [CFG_ABITS-1:0] H1ADDR; |
| input [CFG_DBITS-1:0] H1DATA; |
| input [CFG_ENABLE_H-1:0] H1EN; |
| |
| wire FLUSH1; |
| wire FLUSH2; |
| |
| wire [13:CFG_ABITS] A1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] B1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] C1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] D1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] E1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] F1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] G1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] H1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| |
| wire [13:0] A1ADDR_TOTAL = {A1ADDR_CMPL, A1ADDR}; |
| wire [13:0] B1ADDR_TOTAL = {B1ADDR_CMPL, B1ADDR}; |
| wire [13:0] C1ADDR_TOTAL = {C1ADDR_CMPL, C1ADDR}; |
| wire [13:0] D1ADDR_TOTAL = {D1ADDR_CMPL, D1ADDR}; |
| wire [13:0] E1ADDR_TOTAL = {E1ADDR_CMPL, E1ADDR}; |
| wire [13:0] F1ADDR_TOTAL = {F1ADDR_CMPL, F1ADDR}; |
| wire [13:0] G1ADDR_TOTAL = {G1ADDR_CMPL, G1ADDR}; |
| wire [13:0] H1ADDR_TOTAL = {H1ADDR_CMPL, H1ADDR}; |
| |
| wire [17:CFG_DBITS] A1_RDATA_CMPL; |
| wire [17:CFG_DBITS] C1_RDATA_CMPL; |
| wire [17:CFG_DBITS] E1_RDATA_CMPL; |
| wire [17:CFG_DBITS] G1_RDATA_CMPL; |
| |
| wire [17:CFG_DBITS] B1_WDATA_CMPL; |
| wire [17:CFG_DBITS] D1_WDATA_CMPL; |
| wire [17:CFG_DBITS] F1_WDATA_CMPL; |
| wire [17:CFG_DBITS] H1_WDATA_CMPL; |
| |
| wire [13:0] PORT_A1_ADDR; |
| wire [13:0] PORT_A2_ADDR; |
| wire [13:0] PORT_B1_ADDR; |
| wire [13:0] PORT_B2_ADDR; |
| |
| case (CFG_DBITS) |
| 1: begin |
| assign PORT_A1_ADDR = A1EN ? A1ADDR_TOTAL : (B1EN ? B1ADDR_TOTAL : 14'd0); |
| assign PORT_B1_ADDR = C1EN ? C1ADDR_TOTAL : (D1EN ? D1ADDR_TOTAL : 14'd0); |
| assign PORT_A2_ADDR = E1EN ? E1ADDR_TOTAL : (F1EN ? F1ADDR_TOTAL : 14'd0); |
| assign PORT_B2_ADDR = G1EN ? G1ADDR_TOTAL : (H1EN ? H1ADDR_TOTAL : 14'd0); |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_1, `MODE_1, `MODE_1, `MODE_1, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_1, `MODE_1, `MODE_1, `MODE_1, 1'd0 |
| }; |
| end |
| |
| 2: begin |
| assign PORT_A1_ADDR = A1EN ? (A1ADDR_TOTAL << 1) : (B1EN ? (B1ADDR_TOTAL << 1) : 14'd0); |
| assign PORT_B1_ADDR = C1EN ? (C1ADDR_TOTAL << 1) : (D1EN ? (D1ADDR_TOTAL << 1) : 14'd0); |
| assign PORT_A2_ADDR = E1EN ? (E1ADDR_TOTAL << 1) : (F1EN ? (F1ADDR_TOTAL << 1) : 14'd0); |
| assign PORT_B2_ADDR = G1EN ? (G1ADDR_TOTAL << 1) : (H1EN ? (H1ADDR_TOTAL << 1) : 14'd0); |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_2, `MODE_2, `MODE_2, `MODE_2, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_2, `MODE_2, `MODE_2, `MODE_2, 1'd0 |
| }; |
| end |
| |
| 4: begin |
| assign PORT_A1_ADDR = A1EN ? (A1ADDR_TOTAL << 2) : (B1EN ? (B1ADDR_TOTAL << 2) : 14'd0); |
| assign PORT_B1_ADDR = C1EN ? (C1ADDR_TOTAL << 2) : (D1EN ? (D1ADDR_TOTAL << 2) : 14'd0); |
| assign PORT_A2_ADDR = E1EN ? (E1ADDR_TOTAL << 2) : (F1EN ? (F1ADDR_TOTAL << 2) : 14'd0); |
| assign PORT_B2_ADDR = G1EN ? (G1ADDR_TOTAL << 2) : (H1EN ? (H1ADDR_TOTAL << 2) : 14'd0); |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_4, `MODE_4, `MODE_4, `MODE_4, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_4, `MODE_4, `MODE_4, `MODE_4, 1'd0 |
| }; |
| end |
| |
| 8, 9: begin |
| assign PORT_A1_ADDR = A1EN ? (A1ADDR_TOTAL << 3) : (B1EN ? (B1ADDR_TOTAL << 3) : 14'd0); |
| assign PORT_B1_ADDR = C1EN ? (C1ADDR_TOTAL << 3) : (D1EN ? (D1ADDR_TOTAL << 3) : 14'd0); |
| assign PORT_A2_ADDR = E1EN ? (E1ADDR_TOTAL << 3) : (F1EN ? (F1ADDR_TOTAL << 3) : 14'd0); |
| assign PORT_B2_ADDR = G1EN ? (G1ADDR_TOTAL << 3) : (H1EN ? (H1ADDR_TOTAL << 3) : 14'd0); |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_9, `MODE_9, `MODE_9, `MODE_9, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_9, `MODE_9, `MODE_9, `MODE_9, 1'd0 |
| }; |
| end |
| |
| 16, 18: begin |
| assign PORT_A1_ADDR = A1EN ? (A1ADDR_TOTAL << 4) : (B1EN ? (B1ADDR_TOTAL << 4) : 14'd0); |
| assign PORT_B1_ADDR = C1EN ? (C1ADDR_TOTAL << 4) : (D1EN ? (D1ADDR_TOTAL << 4) : 14'd0); |
| assign PORT_A2_ADDR = E1EN ? (E1ADDR_TOTAL << 4) : (F1EN ? (F1ADDR_TOTAL << 4) : 14'd0); |
| assign PORT_B2_ADDR = G1EN ? (G1ADDR_TOTAL << 4) : (H1EN ? (H1ADDR_TOTAL << 4) : 14'd0); |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_18, `MODE_18, `MODE_18, `MODE_18, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_18, `MODE_18, `MODE_18, `MODE_18, 1'd0 |
| }; |
| end |
| |
| default: begin |
| assign PORT_A1_ADDR = A1EN ? A1ADDR_TOTAL : (B1EN ? B1ADDR_TOTAL : 14'd0); |
| assign PORT_B1_ADDR = C1EN ? C1ADDR_TOTAL : (D1EN ? D1ADDR_TOTAL : 14'd0); |
| assign PORT_A2_ADDR = E1EN ? E1ADDR_TOTAL : (F1EN ? F1ADDR_TOTAL : 14'd0); |
| assign PORT_B2_ADDR = G1EN ? G1ADDR_TOTAL : (H1EN ? H1ADDR_TOTAL : 14'd0); |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_36, `MODE_36, `MODE_36, `MODE_36, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_36, `MODE_36, `MODE_36, `MODE_36, 1'd0 |
| }; |
| end |
| endcase |
| |
| assign FLUSH1 = 1'b0; |
| assign FLUSH2 = 1'b0; |
| |
| wire [17:0] PORT_A1_RDATA; |
| wire [17:0] PORT_B1_RDATA; |
| wire [17:0] PORT_A2_RDATA; |
| wire [17:0] PORT_B2_RDATA; |
| |
| wire [17:0] PORT_A1_WDATA; |
| wire [17:0] PORT_B1_WDATA; |
| wire [17:0] PORT_A2_WDATA; |
| wire [17:0] PORT_B2_WDATA; |
| |
| // Assign read/write data - handle special case for 9bit mode |
| // parity bit for 9bit mode is placed in R/W port on bit #16 |
| case (CFG_DBITS) |
| 9: begin |
| assign A1DATA = {PORT_A1_RDATA[16], PORT_A1_RDATA[7:0]}; |
| assign C1DATA = {PORT_B1_RDATA[16], PORT_B1_RDATA[7:0]}; |
| assign E1DATA = {PORT_A2_RDATA[16], PORT_A2_RDATA[7:0]}; |
| assign G1DATA = {PORT_B2_RDATA[16], PORT_B2_RDATA[7:0]}; |
| assign PORT_A1_WDATA = {B1_WDATA_CMPL[17], B1DATA[8], B1_WDATA_CMPL[16:9], B1DATA[7:0]}; |
| assign PORT_B1_WDATA = {D1_WDATA_CMPL[17], D1DATA[8], D1_WDATA_CMPL[16:9], D1DATA[7:0]}; |
| assign PORT_A2_WDATA = {F1_WDATA_CMPL[17], F1DATA[8], F1_WDATA_CMPL[16:9], F1DATA[7:0]}; |
| assign PORT_B2_WDATA = {H1_WDATA_CMPL[17], H1DATA[8], H1_WDATA_CMPL[16:9], H1DATA[7:0]}; |
| end |
| default: begin |
| assign A1DATA = PORT_A1_RDATA[CFG_DBITS-1:0]; |
| assign C1DATA = PORT_B1_RDATA[CFG_DBITS-1:0]; |
| assign E1DATA = PORT_A2_RDATA[CFG_DBITS-1:0]; |
| assign G1DATA = PORT_B2_RDATA[CFG_DBITS-1:0]; |
| assign PORT_A1_WDATA = {B1_WDATA_CMPL, B1DATA}; |
| assign PORT_B1_WDATA = {D1_WDATA_CMPL, D1DATA}; |
| assign PORT_A2_WDATA = {F1_WDATA_CMPL, F1DATA}; |
| assign PORT_B2_WDATA = {H1_WDATA_CMPL, H1DATA}; |
| |
| end |
| endcase |
| |
| wire PORT_A1_CLK = CLK1; |
| wire PORT_A2_CLK = CLK3; |
| wire PORT_B1_CLK = CLK2; |
| wire PORT_B2_CLK = CLK4; |
| |
| wire PORT_A1_REN = A1EN; |
| wire PORT_A1_WEN = B1EN[0]; |
| wire [CFG_ENABLE_B-1:0] PORT_A1_BE = {B1EN[1],B1EN[0]}; |
| |
| wire PORT_A2_REN = E1EN; |
| wire PORT_A2_WEN = F1EN[0]; |
| wire [CFG_ENABLE_F-1:0] PORT_A2_BE = {F1EN[1],F1EN[0]}; |
| |
| wire PORT_B1_REN = C1EN; |
| wire PORT_B1_WEN = D1EN[0]; |
| wire [CFG_ENABLE_D-1:0] PORT_B1_BE = {D1EN[1],D1EN[0]}; |
| |
| wire PORT_B2_REN = G1EN; |
| wire PORT_B2_WEN = H1EN[0]; |
| wire [CFG_ENABLE_H-1:0] PORT_B2_BE = {H1EN[1],H1EN[0]}; |
| |
| TDP36K _TECHMAP_REPLACE_ ( |
| .WDATA_A1_i(PORT_A1_WDATA), |
| .RDATA_A1_o(PORT_A1_RDATA), |
| .ADDR_A1_i(PORT_A1_ADDR), |
| .CLK_A1_i(PORT_A1_CLK), |
| .REN_A1_i(PORT_A1_REN), |
| .WEN_A1_i(PORT_A1_WEN), |
| .BE_A1_i(PORT_A1_BE), |
| |
| .WDATA_A2_i(PORT_A2_WDATA), |
| .RDATA_A2_o(PORT_A2_RDATA), |
| .ADDR_A2_i(PORT_A2_ADDR), |
| .CLK_A2_i(PORT_A2_CLK), |
| .REN_A2_i(PORT_A2_REN), |
| .WEN_A2_i(PORT_A2_WEN), |
| .BE_A2_i(PORT_A2_BE), |
| |
| .WDATA_B1_i(PORT_B1_WDATA), |
| .RDATA_B1_o(PORT_B1_RDATA), |
| .ADDR_B1_i(PORT_B1_ADDR), |
| .CLK_B1_i(PORT_B1_CLK), |
| .REN_B1_i(PORT_B1_REN), |
| .WEN_B1_i(PORT_B1_WEN), |
| .BE_B1_i(PORT_B1_BE), |
| |
| .WDATA_B2_i(PORT_B2_WDATA), |
| .RDATA_B2_o(PORT_B2_RDATA), |
| .ADDR_B2_i(PORT_B2_ADDR), |
| .CLK_B2_i(PORT_B2_CLK), |
| .REN_B2_i(PORT_B2_REN), |
| .WEN_B2_i(PORT_B2_WEN), |
| .BE_B2_i(PORT_B2_BE), |
| |
| .FLUSH1_i(FLUSH1), |
| .FLUSH2_i(FLUSH2) |
| ); |
| endmodule |
| |
| module BRAM2x18_SDP (A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN, C1ADDR, C1DATA, C1EN, CLK1, CLK2, D1ADDR, D1DATA, D1EN); |
| parameter CFG_ABITS = 11; |
| parameter CFG_DBITS = 18; |
| parameter CFG_ENABLE_B = 4; |
| parameter CFG_ENABLE_D = 4; |
| |
| parameter CLKPOL2 = 1; |
| parameter CLKPOL3 = 1; |
| parameter [18431:0] INIT0 = 18432'bx; |
| parameter [18431:0] INIT1 = 18432'bx; |
| |
| input CLK1; |
| input CLK2; |
| |
| input [CFG_ABITS-1:0] A1ADDR; |
| output [CFG_DBITS-1:0] A1DATA; |
| input A1EN; |
| |
| input [CFG_ABITS-1:0] B1ADDR; |
| input [CFG_DBITS-1:0] B1DATA; |
| input [CFG_ENABLE_B-1:0] B1EN; |
| |
| input [CFG_ABITS-1:0] C1ADDR; |
| output [CFG_DBITS-1:0] C1DATA; |
| input C1EN; |
| |
| input [CFG_ABITS-1:0] D1ADDR; |
| input [CFG_DBITS-1:0] D1DATA; |
| input [CFG_ENABLE_D-1:0] D1EN; |
| |
| wire FLUSH1; |
| wire FLUSH2; |
| |
| wire [13:CFG_ABITS] A1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] B1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] C1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| wire [13:CFG_ABITS] D1ADDR_CMPL = {14-CFG_ABITS{1'b0}}; |
| |
| wire [13:0] A1ADDR_TOTAL = {A1ADDR_CMPL, A1ADDR}; |
| wire [13:0] B1ADDR_TOTAL = {B1ADDR_CMPL, B1ADDR}; |
| wire [13:0] C1ADDR_TOTAL = {C1ADDR_CMPL, C1ADDR}; |
| wire [13:0] D1ADDR_TOTAL = {D1ADDR_CMPL, D1ADDR}; |
| |
| wire [17:CFG_DBITS] A1_RDATA_CMPL; |
| wire [17:CFG_DBITS] C1_RDATA_CMPL; |
| |
| wire [17:CFG_DBITS] B1_WDATA_CMPL; |
| wire [17:CFG_DBITS] D1_WDATA_CMPL; |
| |
| wire [13:0] PORT_A1_ADDR; |
| wire [13:0] PORT_A2_ADDR; |
| wire [13:0] PORT_B1_ADDR; |
| wire [13:0] PORT_B2_ADDR; |
| |
| case (CFG_DBITS) |
| 1: begin |
| assign PORT_A1_ADDR = A1ADDR_TOTAL; |
| assign PORT_B1_ADDR = B1ADDR_TOTAL; |
| assign PORT_A2_ADDR = C1ADDR_TOTAL; |
| assign PORT_B2_ADDR = D1ADDR_TOTAL; |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_1, `MODE_1, `MODE_1, `MODE_1, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_1, `MODE_1, `MODE_1, `MODE_1, 1'd0 |
| }; |
| end |
| |
| 2: begin |
| assign PORT_A1_ADDR = A1ADDR_TOTAL << 1; |
| assign PORT_B1_ADDR = B1ADDR_TOTAL << 1; |
| assign PORT_A2_ADDR = C1ADDR_TOTAL << 1; |
| assign PORT_B2_ADDR = D1ADDR_TOTAL << 1; |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_2, `MODE_2, `MODE_2, `MODE_2, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_2, `MODE_2, `MODE_2, `MODE_2, 1'd0 |
| }; |
| end |
| |
| 4: begin |
| assign PORT_A1_ADDR = A1ADDR_TOTAL << 2; |
| assign PORT_B1_ADDR = B1ADDR_TOTAL << 2; |
| assign PORT_A2_ADDR = C1ADDR_TOTAL << 2; |
| assign PORT_B2_ADDR = D1ADDR_TOTAL << 2; |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_4, `MODE_4, `MODE_4, `MODE_4, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_4, `MODE_4, `MODE_4, `MODE_4, 1'd0 |
| }; |
| end |
| |
| 8, 9: begin |
| assign PORT_A1_ADDR = A1ADDR_TOTAL << 3; |
| assign PORT_B1_ADDR = B1ADDR_TOTAL << 3; |
| assign PORT_A2_ADDR = C1ADDR_TOTAL << 3; |
| assign PORT_B2_ADDR = D1ADDR_TOTAL << 3; |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_9, `MODE_9, `MODE_9, `MODE_9, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_9, `MODE_9, `MODE_9, `MODE_9, 1'd0 |
| }; |
| end |
| |
| 16, 18: begin |
| assign PORT_A1_ADDR = A1ADDR_TOTAL << 4; |
| assign PORT_B1_ADDR = B1ADDR_TOTAL << 4; |
| assign PORT_A2_ADDR = C1ADDR_TOTAL << 4; |
| assign PORT_B2_ADDR = D1ADDR_TOTAL << 4; |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_18, `MODE_18, `MODE_18, `MODE_18, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_18, `MODE_18, `MODE_18, `MODE_18, 1'd0 |
| }; |
| end |
| |
| default: begin |
| assign PORT_A1_ADDR = A1ADDR_TOTAL; |
| assign PORT_B1_ADDR = B1ADDR_TOTAL; |
| assign PORT_A2_ADDR = D1ADDR_TOTAL; |
| assign PORT_B2_ADDR = C1ADDR_TOTAL; |
| defparam _TECHMAP_REPLACE_.MODE_BITS = { 1'b1, |
| 11'd10, 11'd10, 4'd0, `MODE_36, `MODE_36, `MODE_36, `MODE_36, 1'd0, |
| 12'd10, 12'd10, 4'd0, `MODE_36, `MODE_36, `MODE_36, `MODE_36, 1'd0 |
| }; |
| end |
| endcase |
| |
| assign FLUSH1 = 1'b0; |
| assign FLUSH2 = 1'b0; |
| |
| wire [17:0] PORT_A1_RDATA; |
| wire [17:0] PORT_B1_RDATA; |
| wire [17:0] PORT_A2_RDATA; |
| wire [17:0] PORT_B2_RDATA; |
| |
| wire [17:0] PORT_A1_WDATA; |
| wire [17:0] PORT_B1_WDATA; |
| wire [17:0] PORT_A2_WDATA; |
| wire [17:0] PORT_B2_WDATA; |
| |
| // Assign read/write data - handle special case for 9bit mode |
| // parity bit for 9bit mode is placed in R/W port on bit #16 |
| case (CFG_DBITS) |
| 9: begin |
| assign A1DATA = {PORT_A1_RDATA[16], PORT_A1_RDATA[7:0]}; |
| assign C1DATA = {PORT_A2_RDATA[16], PORT_A2_RDATA[7:0]}; |
| assign PORT_A1_WDATA = {18{1'b0}}; |
| assign PORT_B1_WDATA = {B1_WDATA_CMPL[17], B1DATA[8], B1_WDATA_CMPL[16:9], B1DATA[7:0]}; |
| assign PORT_A2_WDATA = {18{1'b0}}; |
| assign PORT_B2_WDATA = {D1_WDATA_CMPL[17], D1DATA[8], D1_WDATA_CMPL[16:9], D1DATA[7:0]}; |
| end |
| default: begin |
| assign A1DATA = PORT_A1_RDATA[CFG_DBITS-1:0]; |
| assign C1DATA = PORT_A2_RDATA[CFG_DBITS-1:0]; |
| assign PORT_A1_WDATA = {18{1'b1}}; |
| assign PORT_B1_WDATA = {B1_WDATA_CMPL, B1DATA}; |
| assign PORT_A2_WDATA = {18{1'b1}}; |
| assign PORT_B2_WDATA = {D1_WDATA_CMPL, D1DATA}; |
| |
| end |
| endcase |
| |
| wire PORT_A1_CLK = CLK1; |
| wire PORT_A2_CLK = CLK2; |
| wire PORT_B1_CLK = CLK1; |
| wire PORT_B2_CLK = CLK2; |
| |
| wire PORT_A1_REN = A1EN; |
| wire PORT_A1_WEN = 1'b0; |
| wire [CFG_ENABLE_B-1:0] PORT_A1_BE = {PORT_A1_WEN,PORT_A1_WEN}; |
| |
| wire PORT_A2_REN = C1EN; |
| wire PORT_A2_WEN = 1'b0; |
| wire [CFG_ENABLE_D-1:0] PORT_A2_BE = {PORT_A2_WEN,PORT_A2_WEN}; |
| |
| wire PORT_B1_REN = 1'b0; |
| wire PORT_B1_WEN = B1EN[0]; |
| wire [CFG_ENABLE_B-1:0] PORT_B1_BE = {B1EN[1],B1EN[0]}; |
| |
| wire PORT_B2_REN = 1'b0; |
| wire PORT_B2_WEN = D1EN[0]; |
| wire [CFG_ENABLE_D-1:0] PORT_B2_BE = {D1EN[1],D1EN[0]}; |
| |
| TDP36K _TECHMAP_REPLACE_ ( |
| .WDATA_A1_i(PORT_A1_WDATA), |
| .RDATA_A1_o(PORT_A1_RDATA), |
| .ADDR_A1_i(PORT_A1_ADDR), |
| .CLK_A1_i(PORT_A1_CLK), |
| .REN_A1_i(PORT_A1_REN), |
| .WEN_A1_i(PORT_A1_WEN), |
| .BE_A1_i(PORT_A1_BE), |
| |
| .WDATA_A2_i(PORT_A2_WDATA), |
| .RDATA_A2_o(PORT_A2_RDATA), |
| .ADDR_A2_i(PORT_A2_ADDR), |
| .CLK_A2_i(PORT_A2_CLK), |
| .REN_A2_i(PORT_A2_REN), |
| .WEN_A2_i(PORT_A2_WEN), |
| .BE_A2_i(PORT_A2_BE), |
| |
| .WDATA_B1_i(PORT_B1_WDATA), |
| .RDATA_B1_o(PORT_B1_RDATA), |
| .ADDR_B1_i(PORT_B1_ADDR), |
| .CLK_B1_i(PORT_B1_CLK), |
| .REN_B1_i(PORT_B1_REN), |
| .WEN_B1_i(PORT_B1_WEN), |
| .BE_B1_i(PORT_B1_BE), |
| |
| .WDATA_B2_i(PORT_B2_WDATA), |
| .RDATA_B2_o(PORT_B2_RDATA), |
| .ADDR_B2_i(PORT_B2_ADDR), |
| .CLK_B2_i(PORT_B2_CLK), |
| .REN_B2_i(PORT_B2_REN), |
| .WEN_B2_i(PORT_B2_WEN), |
| .BE_B2_i(PORT_B2_BE), |
| |
| .FLUSH1_i(FLUSH1), |
| .FLUSH2_i(FLUSH2) |
| ); |
| endmodule |
