| // Copyright (c) 2000 Stephen Williams (steve@icarus.com) |
| // |
| // This source code is free software; you can redistribute it |
| // and/or modify it in source code form under the terms of the GNU |
| // General Public License as published by the Free Software |
| // Foundation; either version 2 of the License, or (at your option) |
| // any later version. |
| // |
| // This program is distributed in the hope that it will be useful, |
| // but WITHOUT ANY WARRANTY; without even the implied warranty of |
| // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| // GNU General Public License for more details. |
| // |
| // You should have received a copy of the GNU General Public License |
| // along with this program; if not, write to the Free Software |
| // Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA |
| // |
| |
| |
| /* |
| * This module implements what essentially amounts to an array of DFF |
| * devices with output enable. This test checks the operation of the |
| * bufif0 and bufif1 devices. |
| */ |
| module grayGap (ad, clk, read, write); |
| |
| output [31:0] ad; |
| input clk, read, write; |
| |
| reg [15:0] regff; |
| |
| bufif0 ad_drv [31:0] (ad, {16'b0, regff}, read); |
| |
| always @(posedge clk) |
| if (write) regff = ad[15:0]; |
| |
| |
| endmodule |
| |
| |
| module main; |
| |
| wire [31:0] ad; |
| reg clk, read, write; |
| |
| reg [31:0] ad_val; |
| reg ad_en; |
| |
| bufif1 ad_drv[31:0] (ad, ad_val, ad_en); |
| |
| grayGap test (ad, clk, read, write); |
| |
| always #10 clk = ~clk; |
| |
| initial begin |
| clk = 1; |
| read = 1; |
| write = 0; |
| $monitor($time, "ad=%b", ad); |
| |
| // Set up to write a value into the grayGap register. |
| @(negedge clk) |
| ad_val = 32'haaaa_aaaa; |
| read = 1; |
| write = 1; |
| ad_en = 1; |
| |
| // The posedge has passed, now set up to read that value |
| // out. Turn all the drivers off for a moment, to see that the |
| // line becomes tri-state... |
| @(negedge clk) |
| ad_en = 0; |
| write = 0; |
| |
| // Now read the value. |
| #1 read = 0; |
| |
| #1 $display("Wrote %h, got %h", ad_val, ad); |
| |
| if (ad !== 32'b0000_0000_0000_0000_1010_1010_1010_1010) begin |
| $display("FAILED -- ad is %b", ad); |
| $finish; |
| end |
| |
| #2 read = 1; |
| |
| $display("PASSED"); |
| $finish; |
| end |
| |
| endmodule // main |
| |