SVIncCompil/Testcases/Verilator/t_order.v

// DESCRIPTION: Verilator: Verilog Test module
//
// This file ONLY is placed into the Public Domain, for any use,
// without warranty, 2003 by Wilson Snyder.

module t (/*AUTOARG*/
   // Inputs
   clk
   );

   // surefire lint_off ASWEBB
   // surefire lint_off ASWEMB
   // surefire lint_off STMINI
   // surefire lint_off CSEBEQ

   input clk;

   reg [7:0] a_to_clk_levm3;
   reg [7:0] b_to_clk_levm1;
   reg [7:0] c_com_levs10;
   reg [7:0] d_to_clk_levm2;
   /*AUTOWIRE*/
   // Beginning of automatic wires (for undeclared instantiated-module outputs)
   wire [7:0]		m_from_clk_lev1_r;	// From a of t_order_a.v
   wire [7:0]		n_from_clk_lev2;	// From a of t_order_a.v
   wire [7:0]		o_from_com_levs11;	// From a of t_order_a.v
   wire [7:0]		o_from_comandclk_levs12;// From a of t_order_a.v
   wire [7:0]		o_subfrom_clk_lev2;	// From b of t_order_b.v
   // End of automatics

   reg [7:0] cyc; initial cyc=0;

   t_order_a a (
		.one			(8'h1),
		/*AUTOINST*/
		// Outputs
		.m_from_clk_lev1_r	(m_from_clk_lev1_r[7:0]),
		.n_from_clk_lev2	(n_from_clk_lev2[7:0]),
		.o_from_com_levs11	(o_from_com_levs11[7:0]),
		.o_from_comandclk_levs12(o_from_comandclk_levs12[7:0]),
		// Inputs
		.clk			(clk),
		.a_to_clk_levm3		(a_to_clk_levm3[7:0]),
		.b_to_clk_levm1		(b_to_clk_levm1[7:0]),
		.c_com_levs10		(c_com_levs10[7:0]),
		.d_to_clk_levm2		(d_to_clk_levm2[7:0]));

   t_order_b b (
		/*AUTOINST*/
		// Outputs
		.o_subfrom_clk_lev2	(o_subfrom_clk_lev2[7:0]),
		// Inputs
		.m_from_clk_lev1_r	(m_from_clk_lev1_r[7:0]));

   reg [7:0]  o_from_com_levs12;
   reg [7:0]  o_from_com_levs13;
   always @ (/*AS*/o_from_com_levs11) begin
      o_from_com_levs12 = o_from_com_levs11 + 8'h1;
      o_from_com_levs12 = o_from_com_levs12 + 8'h1;  // Test we can add to self and optimize
      o_from_com_levs13 = o_from_com_levs12;
   end

   reg  	sepassign_in;
   // verilator lint_off UNOPTFLAT
   wire [3:0] 	sepassign;
   // verilator lint_on UNOPTFLAT

   // verilator lint_off UNOPT
   assign #0.1	sepassign[0]	= 0,
   	  	sepassign[1]	= sepassign[2],
   	  	sepassign[2]	= sepassign[3],
    	  	sepassign[3]	= sepassign_in;
   wire [7:0] 	o_subfrom_clk_lev3 = o_subfrom_clk_lev2;
   // verilator lint_on UNOPT

   always @ (posedge clk) begin
      cyc <= cyc+8'd1;
      sepassign_in <= 0;
      if (cyc == 8'd1) begin
	 a_to_clk_levm3 <= 0;
	 d_to_clk_levm2 <= 1;
	 b_to_clk_levm1 <= 1;
	 c_com_levs10 <= 2;
	 sepassign_in <= 1;
      end
      if (cyc == 8'd2) begin
	 if (sepassign !== 4'b1110) $stop;
      end
      if (cyc == 8'd3) begin

	 $display("%d %d %d %d",m_from_clk_lev1_r,
		  n_from_clk_lev2,
		  o_from_com_levs11,
		  o_from_comandclk_levs12);

	 if (m_from_clk_lev1_r !== 8'h2) $stop;
	 if (o_subfrom_clk_lev3 !== 8'h2) $stop;
	 if (n_from_clk_lev2 !== 8'h2) $stop;
	 if (o_from_com_levs11 !== 8'h3) $stop;
	 if (o_from_com_levs13 !== 8'h5) $stop;
	 if (o_from_comandclk_levs12 !== 8'h5) $stop;
	 $write("*-* All Finished *-*\n");
	 $finish;
      end
   end

endmodule