| // DESCRIPTION: Verilator: Verilog Test module |
| // |
| // This file ONLY is placed into the Public Domain, for any use, |
| // without warranty, 2014 by Wilson Snyder. |
| |
| // bug823 |
| module t (/*AUTOARG*/ |
| // Inputs |
| clk |
| ); |
| input clk; |
| |
| integer cyc=0; |
| reg [63:0] crc; |
| reg [63:0] sum; |
| |
| // Take CRC data and apply to testblock inputs |
| wire [2:0] in = crc[2:0]; |
| |
| /*AUTOWIRE*/ |
| // Beginning of automatic wires (for undeclared instantiated-module outputs) |
| wire [3:0] mask; // From test of Test.v |
| wire [3:0] out; // From test of Test.v |
| // End of automatics |
| |
| Test test (/*AUTOINST*/ |
| // Outputs |
| .out (out[3:0]), |
| .mask (mask[3:0]), |
| // Inputs |
| .clk (clk), |
| .in (in[2:0])); |
| |
| // Aggregate outputs into a single result vector |
| wire [63:0] result = {60'h0, out & mask}; |
| |
| // Test loop |
| always @ (posedge clk) begin |
| `ifdef TEST_VERBOSE |
| $write("[%0t] cyc==%0d crc=%x out=%b mask=%b\n",$time, cyc, crc, out, mask); |
| `endif |
| cyc <= cyc + 1; |
| crc <= {crc[62:0], crc[63]^crc[2]^crc[0]}; |
| sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]}; |
| if (cyc==0) begin |
| // Setup |
| crc <= 64'h5aef0c8d_d70a4497; |
| sum <= '0; |
| end |
| else if (cyc<10) begin |
| sum <= '0; |
| end |
| else if (cyc<90) begin |
| end |
| else if (cyc==99) begin |
| $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum); |
| if (crc !== 64'hc77bb9b3784ea091) $stop; |
| // What checksum will we end up with (above print should match) |
| `define EXPECTED_SUM 64'ha9d3a7a69d2bea75 |
| if (sum !== `EXPECTED_SUM) $stop; |
| $write("*-* All Finished *-*\n"); |
| $finish; |
| end |
| end |
| |
| endmodule |
| |
| module Test (/*AUTOARG*/ |
| // Outputs |
| out, mask, |
| // Inputs |
| clk, in |
| ); |
| |
| input clk; |
| input [2:0] in; |
| output reg [3:0] out; |
| output reg [3:0] mask; |
| localparam [15:5] p = 11'h1ac; |
| |
| always @(posedge clk) begin |
| // verilator lint_off WIDTH |
| out <= p[15 + in -: 5]; |
| // verilator lint_on WIDTH |
| mask[3] <= ((15 + in - 5) < 12); |
| mask[2] <= ((15 + in - 5) < 13); |
| mask[1] <= ((15 + in - 5) < 14); |
| mask[0] <= ((15 + in - 5) < 15); |
| end |
| |
| endmodule |